A

  • ABAQUS Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
  • ABAQUS Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • Abdominal indentation Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • ACTIN CORTEX Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Adaptive Neuro-Fuzzy Interface System (ANFIS) A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Adhesive Joint Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
  • Adhesively bonded single-lap joint Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Aftertreatment technique Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
  • Agglomeration A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
  • Air-backed plate Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Aircraft propellers Numerical and Neural Network Modeling and control of an Aircraft Propeller [Volume 49, Issue 1, 2018, Pages 63-69]
  • Airy's stress potential functions ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Airy stress potential function GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
  • Airy stress potential function Elzaki transform method for finding solutions to two-dimensional elasticity problems in polar coordinates formulated using Airy stress functions [Volume 51, Issue 2, 2020, Pages 302-310]
  • Airy stress potential function Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Aluminium alloy Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Analysis Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
  • Analysis of Variance Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • Analysis of variance (ANOVA) An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
  • Analytical formulation A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [(Articles in Press)]
  • Angle Beam Transducer Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
  • Angular Velocity Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
  • Anisotropy Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • ANSWER SCRIPT A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
  • ANSYS-FLUENT Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • Approximate solution Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
  • Artificial Neural Network Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Aspect ratio A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
  • Asymmetrical wire rolling Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
  • Asymptotical Stability From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • ATES محیط متخلخل عوامل مؤثر بر استفاده از منابع آب زیرزمینی به عنوان مخزن ذخیره انرژی [Volume 44, Issue 1, 2011, Pages 61-70]
  • ATOMIC FORCE MICROSCOPY Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Attached mass-spring system Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Attenuation Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
  • A unified beam theory On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
  • Autofrettage Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • Auxetic viscoelastic Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
  • Axially functionally graded beam Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Axially Functionally Graded Beams Geometrically nonlinear analysis of axially functionally graded beams by using finite element method [Volume 51, Issue 2, 2020, Pages 411-416]
  • Axial Vibration Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]

B

  • Backstepping A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
  • Balancing Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
  • Ball mill Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
  • Ball valve Numerical simulation of the effect of particle size on the erosion damage in ball valves of pressure reducing station [Volume 52, Issue 1, 2021, Pages 1-11]
  • Ball valve Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
  • Basic Displacement Functions (BDFs) Analysis of Euler-Bernoulli nanobeams: A mechanical-based solution [Volume 47, Issue 2, 2016, Pages 159-180]
  • Beam Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
  • Beam Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
  • Beam Modal Function Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Bearing fault detection A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
  • Beltrami – Michell stress compatibility equation Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Beltrami-Michell stress compatibilty equations ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Bending A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Bending analysis A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
  • Bennett Methodology Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • BESO Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
  • Bi directional functionally graded materials Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
  • Bi-directional functionally graded materials (BDFGMs) Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
  • Bidirectional Functionally graded plates Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • Biharmonic equation Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Biharmonic function First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
  • Biological analytes Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
  • Biological applications On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
  • Biological Nano-Sensor Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
  • Biosensors Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Blood Flow Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
  • Blood vessel Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Bone The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
  • Boron Nitride Nanotube Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Bottom-Hole Pressure Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Bottom-Hole Pressure (BHP) Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Bottom-Hole Pressure (BHP) Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • BOUC-WEN MODEL Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
  • Boussinesq approximation Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
  • Box-Behnken design Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • B-REP A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
  • BUCKLED PLATE A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • Buckling Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
  • Buckling Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Buckling A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Buckling analysis Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Buckling analysis A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
  • Buckling and nonlinear Post-buckling analysis Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]

C

  • Calculation method A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
  • Carbon/Epoxy Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Carbon nanostructures Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
  • Carbon Nanotube Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Carbon nanotube (CNT) A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Carbon nanotube (CNT) A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
  • Carbon nanotubes Longitudinal Magnetic Field Effect on Torsional Vibration of Carbon Nanotubes [Volume 49, Issue 2, 2018, Pages 304-313]
  • Carbon nanotubes Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
  • Car Seat Frame The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • Casimir force Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
  • CaSO4 solution Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Casson Fluid A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Casting Speed Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Cavitation Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
  • Cell Biomechanics The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • CELL CYTOSKELETON Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Cell isolation A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
  • Cell Mechanics A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
  • Center of motion Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Central composite design Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • Central opening Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
  • Centrifugal Pump Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • Centrifugal pump curves Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Centrifugal pump design Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • CFD Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • CFD Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • CFD Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • CFD Simulation Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
  • CFD Simulation Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • Chebyshev polynomial Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Chebyshev polynomial Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Chemicals Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
  • Circular and annular nanoplate Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Circular Cylindrical Shell Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Circumferential groove Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Closed die forging Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging [Volume 52, Issue 1, 2021, Pages 69-84]
  • Cohesive Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
  • Cold rolling Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Collocation Method Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
  • Combination Method Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
  • Common quadratic Lyapunov function A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
  • Complex Fourier Lagrange Elements An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
  • Complex Fourier shape functions An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
  • Composite Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
  • Composite pipes Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
  • Composite plates Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
  • Composite Propeller Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Composites NUMERICAL INVESTIGATION OF THE PERFORMANCE OF FIBRE-GLASS/TALC FILLED EPOXY COMPOSITE AS INSULATOR IN HEATING APPLICATIONS [(Articles in Press)]
  • Composite slabs Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Composite slabs A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
  • Compressible viscous flow Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
  • Compression Power Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
  • Compressive uniaxial loading Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
  • Computational fluid dynamic (CFD) Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Computational fluid dynamics (CFD) Numerical Study of Droplet Generation Process in a Microfluidic Flow Focusing [Volume 46, Issue 2, 2015, Pages 167-175]
  • Conical shells Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]
  • Consistency model, generalized trapezoidal algorithm A damage model incorporating dynamic plastic yield surface [Volume 47, Issue 1, 2016, Pages 11-24]
  • Constrained Groove Pressing Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Contact forces Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Continuum damage mechanics A damage model incorporating dynamic plastic yield surface [Volume 47, Issue 1, 2016, Pages 11-24]
  • Convection On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
  • Convection Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
  • Convective drying Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
  • Convective-radiative fin Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Cooling tower Effect of Wind on Thermal Performance of Heller Dry Cooling Tower [Volume 45, Issue 1, 2014, Pages 1-8]
  • Cost minimization Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
  • Coulomb fission A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
  • Coupled oil pipes Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
  • Cover plate moment connection Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
  • Crack Attractor Based Analysis of Centrally Cracked Plate Subjected to Chaotic Excitation [Volume 51, Issue 1, 2020, Pages 199-212]
  • Crack Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Crack A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Crack Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Cracked nanobeam A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [(Articles in Press)]
  • Creep Response The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Critical buckling load factors On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
  • Critical flow velocity Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Cryo-mill Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
  • CSZ Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • CUDA Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
  • Cure cycle optimization Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Curved walking From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • Cyclic Loading Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
  • Cyclic void growth modeling Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
  • Cylinders with Varying Thickness An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]

D

  • Damped Model Updating Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Decoupling A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
  • Deformation Rate Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
  • Delamination defect Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
  • Dent Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
  • Depth parameter Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Design and implementation Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
  • Design of Experiments (DOE) A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Dielectrophoresis Dielectrophoretic effect of nonuniform electric fields on the protoplast cell [Volume 48, Issue 1, 2017, Pages 1-14]
  • Differential equations of equilibrium ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Differential evolution algorithm Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
  • DIFFERENTIAL QUADRATURE ELEMENT METHOD A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • DIFFERENTIAL QUADRATURE ELEMENT METHOD Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Differential quadrature method A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Differential quadrature method Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Different Lay-ups Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Dimensionless Frequency Ratio Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • DIRECT ITERATIVE METHOD A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • DLGS Nonlocal DQM for a Nonlinear Buckling Analysis of DLGSs Integrated with Zno Piezoelectric Layers [Volume 45, Issue 1, 2014, Pages 9-22]
  • Dowel Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]
  • DQM Nonlocal DQM for a Nonlinear Buckling Analysis of DLGSs Integrated with Zno Piezoelectric Layers [Volume 45, Issue 1, 2014, Pages 9-22]
  • Draft tube Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
  • Droplet A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
  • Droplet deformation Four different types of a single drop dripping down a hole under gravity by lattice Boltzmann method [Volume 47, Issue 1, 2016, Pages 89-98]
  • Drying Stresses Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
  • Duffing Oscillators Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
  • Dynamic compression Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
  • Dynamic Programming Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
  • Dynamic response Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Dynamic response Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
  • Dynamic yield surface A damage model incorporating dynamic plastic yield surface [Volume 47, Issue 1, 2016, Pages 11-24]

E

  • Economic Analysis Numerical and Economic Study of Performance of Centrifugal Pump as Turbine [Volume 48, Issue 2, 2017, Pages 151-160]
  • Efficiency Performance Improvements of a Centrifugal Pump with Different Impellers using Polymer Additive [Volume 48, Issue 2, 2017, Pages 199-206]
  • Eigenvalue equations Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Eigenvalue equations Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Elastic medium Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
  • Elasto- plastic analysis Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • Elasto-plastic analysis Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Electrical Discharge Machining (EDM) An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
  • Electricity distribution network Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
  • Electric vehicles Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
  • Electroosmotic flow Slip effect on the unsteady electroosmotic and pressure-driven flows of two-layer fluids in a rectangular microchannel [Volume 52, Issue 1, 2021, Pages 12-26]
  • Elzaki transform method Elzaki transform method for finding solutions to two-dimensional elasticity problems in polar coordinates formulated using Airy stress functions [Volume 51, Issue 2, 2020, Pages 302-310]
  • ENERGY ANALYSIS Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
  • Energy Efficiency Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • ENGINEERING DRAWING A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
  • ENGINEERING DRAWING A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
  • Enhanced Oil Recovery Review of Enhanced Oil Recovery Decision Making in Complex Carbonate Reservoirs: Fluid Flow and Geomechanics Mechanisms [Volume 52, Issue 2, 2021, Pages 350-365]
  • Entransy dissipation Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Environmental impact Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • ESL theory Unified refined beam theory applied to the Spectral Finite Element Method for analysis of laminated composites. [Volume 52, Issue 1, 2021, Pages 44-60]
  • Euler–Bernoulli beam Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
  • Euler-Bernoulli Beam Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Euler-Bernoulli Beam Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Evaporation Sessile and Pendant Micro-Liter Drops Evaporate at Different Rates: An Experimental Approach [Volume 47, Issue 1, 2016, Pages 109-119]
  • Evaporation Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
  • Evolutionary Optimization Algorithms Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Expanding or Contracting walls On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
  • Expanding or Contracting walls, Chebychev Spectral Collocation method Analysis of Flow of Nanofluid through a Porous Channel with Expanding or Contracting Walls using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 225-232]
  • Explicit analytical solutions Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
  • Exponentially Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Extrusion Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]

F

  • FAIR ASSESSMENT A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
  • Falling Velocity Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
  • Fast Kurtogram A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
  • Fatigue parameters Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Fault Detection Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • FEA Thread Pitch Variant in Orthodontic Mini-screws: A 3-D Finite Element Analysis [Volume 46, Issue 2, 2015, Pages 257-265]
  • FEM Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
  • FEM Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • FEM Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Femur Bone An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests [Volume 51, Issue 1, 2020, Pages 91-97]
  • FENE-P Fluid Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
  • FE simulation Simultaneous hydroforming of bulge- and T-zone in 304 stainless steel and 70/30 brass tubes [Volume 51, Issue 1, 2020, Pages 213-230]
  • FG Coating Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • FG cylindrical shells Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • FGM Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • FGM nanoplate Refined plate theory for free vibration analysis of FG nanoplates using the nonlocal continuum plate model [Volume 48, Issue 1, 2017, Pages 123-136]
  • FG nanobeam Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model [Volume 50, Issue 1, 2019, Pages 148-156]
  • FG Nanoplates Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • FG sandwich beam On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
  • Fibre-reinforced NUMERICAL INVESTIGATION OF THE PERFORMANCE OF FIBRE-GLASS/TALC FILLED EPOXY COMPOSITE AS INSULATOR IN HEATING APPLICATIONS [(Articles in Press)]
  • Finite Difference Method Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
  • Finite differences scheme A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
  • Finite element A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
  • Finite element An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests [Volume 51, Issue 1, 2020, Pages 91-97]
  • Finite Element Analysis Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
  • Finite Element Method Transient thermo-visco-elastic response of a functionally graded non-axisymmetric cylinder [Volume 46, Issue 2, 2015, Pages 191-204]
  • Finite Element Method Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
  • Finite Element Method Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Finite Element Method On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Finite Element Method Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Finite element model Updating finite element model using frequency domain decomposition method and bees algorithm [Volume 48, Issue 1, 2017, Pages 75-88]
  • Finite Fourier transform Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Fire Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]
  • Fire resistance Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Fire resistance A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
  • First order shear deformation theory Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
  • First-Order Temperature Theory (FTT) An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • First Shear Deformation Plate Theory Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Five-equation model A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Flare Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [(Articles in Press)]
  • Flexibility Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • FlexPDE Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
  • Flexure Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
  • Fluid coupling Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Fluid-induced vibration Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
  • Fluid-Structure Interactions A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
  • FML Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Foam Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
  • Forced vibration Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
  • Forced Vibration Analysis Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Fouling Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Four-bar mechanism Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
  • Fracture Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
  • Fragility Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Frames Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Fredholm integro-differential equation Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
  • Free Vibration Numerical free vibration analysis of higher-order shear deformable beams resting on two-parameter elastic foundation [Volume 46, Issue 2, 2015, Pages 117-131]
  • Free Vibration Analysis of Euler-Bernoulli nanobeams: A mechanical-based solution [Volume 47, Issue 2, 2016, Pages 159-180]
  • Free Vibration Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Free Vibration Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • Free Vibration Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • Free Vibration Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Functional Graded Cable Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Functional graded nanoplate Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Functionally graded adherend Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Functionally Graded Material Transient thermo-visco-elastic response of a functionally graded non-axisymmetric cylinder [Volume 46, Issue 2, 2015, Pages 191-204]
  • Functionally Graded Material Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Functionally Graded Material Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
  • Functionally graded Material (FGM) Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions [Volume 48, Issue 1, 2017, Pages 15-26]
  • Functionally graded Material (FGM) A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
  • Functionally graded Material (FGM) An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • Functionally Graded Materials Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
  • Functionally Graded Plates Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
  • Functionally graded porous plates A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
  • Fuzzy A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
  • Fuzzy PID Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
  • Fuzzy-PID Control Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]

G

  • Galerkin Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
  • Galerkin Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
  • Generalized differential quadrature method (GDQM) Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
  • Generic network topology A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
  • Genetic Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Genetic algorithm An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Genetic Algorithm Numerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming [Volume 45, Issue 1, 2014, Pages 35-45]
  • Genetic Algorithm Fractional Order PID Controller for Diabetes Patients [Volume 46, Issue 1, 2015, Pages 69-76]
  • Genetic Algorithm Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
  • Genetic Algorithm A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
  • Genetic Algorithm Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Genetic Algorithm Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Genetic Algorithm A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
  • Genetic Algorithm (GA) An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
  • Geomechanics Review of Enhanced Oil Recovery Decision Making in Complex Carbonate Reservoirs: Fluid Flow and Geomechanics Mechanisms [Volume 52, Issue 2, 2021, Pages 350-365]
  • Geometrically nonlinear Analysis Geometrically nonlinear analysis of axially functionally graded beams by using finite element method [Volume 51, Issue 2, 2020, Pages 411-416]
  • Geometrical Parameters Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Geometrical Parameters Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Globally asymptotically stable A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
  • Graphene oxide A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Graphene platelet A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]

H

  • Haar wavelet collocation method Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Halpin–Tsai model Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
  • Hamilton's principle Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
  • Hamilton's principle Vibration of inhomogeneous fibrous laminated plates using an efficient and simple polynomial refined theory [Volume 52, Issue 2, 2021, Pages 233-245]
  • Hamilton’s principle Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
  • HARMONIC BALANCE METHOD A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • Harmonic motion Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Hashin Damage Criteria Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Heat exchanger Optimal Design of Shell-and-Tube Heat Exchanger Based on Particle Swarm Optimization Technique [Volume 46, Issue 1, 2015, Pages 21-29]
  • Heat exchanger Water thickness effect on the fin efficiency and heat transfer for partially wet-surface heat exchanger [Volume 47, Issue 2, 2016, Pages 195-207]
  • Heat Sink Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • Heat transfer Effect of Wind on Thermal Performance of Heller Dry Cooling Tower [Volume 45, Issue 1, 2014, Pages 1-8]
  • Heat transfer Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
  • Heat transfer On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • Hemodynamic Properties Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
  • HIGH EFFICIENCY DEEP GRINDING Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Higher-Order Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
  • Higher-order global-local theory Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
  • Hole-Cleaning Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Hollow cylinder Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
  • Homotopy Perturbation Method Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Homotopy Perturbation Method Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
  • Horizontal Circular Cylinder A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Hot forming Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging [Volume 52, Issue 1, 2021, Pages 69-84]
  • HSDT Plate Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • Humidity environment, Multi objective optimization, Magnetic field Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
  • Hydraulic turbine Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
  • Hydromechanical Deep Drawing An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Hydrophobic to Superhydrophobic Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
  • Hydrostatic pressure Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
  • Hyperelastic Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]
  • Hyperelastic FGMs Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • Hyperelastic material Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Hyperelastic Membrane Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Hyperelastic pressure vessel Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • HYSTERESIS BEHAVIOR Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
  • Hysteresis Modeling Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]

I

  • Immersed Boundary Method Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Immersed Interface Method Dielectrophoretic effect of nonuniform electric fields on the protoplast cell [Volume 48, Issue 1, 2017, Pages 1-14]
  • Inconel 718 super alloy An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
  • Incremental explosive analysis (IEA) Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Inertial microfluidics Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Inertial terms A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
  • Initial geometric imperfection Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Inspection Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
  • Instability equations Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Instability equations Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Instable fluid velocity Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
  • Intensity parameter Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Interface capturing A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Interface sharpening A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Internal heat generation Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Internal stability A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
  • Intrinsic forces Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Inverse analysis Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Inverse problem A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
  • Inverse solubility Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Inverted Pendulum Model (IPM) Energy Dissipation Rate Control Via a Semi-Analytical Pattern Generation Approach for Planar Three-Legged Galloping Robot based on the Property of Passive Dynamic Walking [Volume 46, Issue 1, 2015, Pages 31-39]
  • IPMC A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
  • IQ method Large Amplitude Vibration Analysis of Graphene Sheets as Resonant Mass Sensors Using Mixed Pseudo-Spectral and Integral Quadrature Methods [Volume 45, Issue 1, 2014, Pages 61-75]
  • Iran Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
  • Isentropic Efficiency Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]

K

  • Karaj dam lake Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
  • Key Words: Binary Alloy Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Kinetics of swelling Kinetics of swelling of cylindrical functionally graded temperature-responsive hydrogels [Volume 51, Issue 2, 2020, Pages 464-471]
  • Kirchhoff theory Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]

L

  • Labyrinth weirs Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • Lagrange Equations Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • Lamb Wave Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
  • Laminated composite beam Vibration suppression analysis for laminated composite beams embedded actuating magnetostrictive layers [Volume 50, Issue 1, 2019, Pages 69-75]
  • Laminated Plate Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Laplace transform Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Large epoxy model Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Lattice Boltzmann method Four different types of a single drop dripping down a hole under gravity by lattice Boltzmann method [Volume 47, Issue 1, 2016, Pages 89-98]
  • Lattice Boltzmann method Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • Lattice Boltzmann method Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Lattice Boltzmann method Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
  • Lattice Boltzmann method The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
  • Layered Composites Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
  • Layerwise theory Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • League Championship Algorithm A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
  • Learning Vector Quantization (LVQ) A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Least squares weighted residual method Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Lee two-phase model Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
  • Legendre polynomial First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
  • Legendre wavelet Collocation method Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
  • Legendre wavelet Collocation method Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Legged motion Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Legged robots Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Levenberg-Marquardt Numerical and Neural Network Modeling and control of an Aircraft Propeller [Volume 49, Issue 1, 2018, Pages 63-69]
  • Linear dynamic vibration absorber Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Linear Elastic Fracture mechanics A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
  • Liquid height Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Liquid Properties Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Load level Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Load transferred to the bone The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
  • Longitudinal fin Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Longitudinal rectangular fin Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
  • Low cycle fatigue Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
  • LS-DYNA Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]

M

  • Mach number Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • MAC Method Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
  • Macro-Segregation Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Magnetic bar Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Magnetic Fluids Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
  • Magnetic nanoparticles, Magnetic field, Mechanical actuation, Chondrogenesis Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
  • Magnetic Particles Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
  • Magnetizable Fluid Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
  • Magnetohydrodynamic (MHD) A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Magnetohydrodynamics Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
  • Malaria Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Mass Transfer Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
  • Match Asymptotic Expansion Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Material Identification The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • Mathematical model Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
  • Mathematical Modeling Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Mathematical solution Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
  • Maximum Reduction in Sheet Thickness An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Maxwell stress functions ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Maxwell stress tensor Dielectrophoretic effect of nonuniform electric fields on the protoplast cell [Volume 48, Issue 1, 2017, Pages 1-14]
  • Mechanical properties Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
  • Mechanical Properties Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
  • Mechanical Property Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Mechanical Vibration The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • Mechanical Vibrations Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Mechanosensation A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
  • Mechanotransduction Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
  • Mellin transform inversion formula GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
  • Mellin transform method GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
  • MEMS Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
  • MEMS Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • MEMS Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
  • Mesh Density A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
  • Metaconcrete Dynamic behaviour of concrete containing aggregate resonant frequency [Volume 49, Issue 2, 2018, Pages 380-385]
  • Metal Nanoparticles Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
  • MHD flow Unsteady Magneto Hydro Dynamic Flow of a Second Order Fluid over an Oscillating Sheet with a Second Order Slip Flow Model [Volume 47, Issue 2, 2016, Pages 209-218]
  • Microbeams Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
  • Microcantilever Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Microchannel Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • Microchannels A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
  • Microfluidics A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
  • Micropolar Fluid A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Microstructure Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Microstructure Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
  • Microtube Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
  • Mindlin plate theory Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
  • Minimum effort Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Modal Analysis The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • Modified couple stress Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
  • Modified couple stress theory Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
  • Modified couple stress theory Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Modified differential transform method Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Modified strain gradient theory Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Modulus of elasticity Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
  • Molecular Dynamics Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
  • Molecular dynamics simulation A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [(Articles in Press)]
  • Mono-dispersity Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Mooney-Rivlin model Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Moving load Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Moving Mass Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Multi-boiling heat transfer Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Multi-GPU Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
  • Multi-objective optimization Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
  • Multi-objective optimization Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Multi-objective optimization Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
  • Multi-phase flows A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Multiple rising bubbles Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
  • Multiscale composite plate Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
  • Multi-scale hybrid nanocomposites A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Multistage compressor Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • MWCNTs Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]

N

  • Nanobeams Analysis of Euler-Bernoulli nanobeams: A mechanical-based solution [Volume 47, Issue 2, 2016, Pages 159-180]
  • Nanocomposite materials A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Nanocomposites Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
  • Nanodisk Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
  • Nanofluid On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
  • Nanofluid On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • Nanofluid Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
  • Nanofluid Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
  • Nanofluid, Porous Channel Analysis of Flow of Nanofluid through a Porous Channel with Expanding or Contracting Walls using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 225-232]
  • Nanomedicine Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Nanoparticle Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
  • Nano-plate A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Nanorods Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Nanosphere Size dependent nano-spherical pressure vessels based on strain gradient theory [Volume 52, Issue 2, 2021, Pages 307-319]
  • Nano-YSZ Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Natural convection Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
  • Natural convection A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
  • Navier’s method Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
  • Navier-Stokes Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
  • NEMS Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
  • NET ZERO ENERGY BUILDINGS (NZEB) Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
  • Neural Network Numerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming [Volume 45, Issue 1, 2014, Pages 35-45]
  • Neural Network An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Neutral Hole Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Newtonian fluids Slip effect on the unsteady electroosmotic and pressure-driven flows of two-layer fluids in a rectangular microchannel [Volume 52, Issue 1, 2021, Pages 12-26]
  • Non-classical elasticity theory A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Non-equilibrium model Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
  • Non-ideal support Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Nonlinear Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
  • Nonlinear analysis Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Nonlinear Behavior A review on stress distribution, strength and failure of bolted ‎composite joints [Volume 49, Issue 2, 2018, Pages 415-429]
  • Nonlinear oscillation Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Nonlinear vibration Nonlinear Flow-Induced Flutter Instability of Double CNTs Using Reddy Beam Theory [Volume 46, Issue 1, 2015, Pages 1-12]
  • Nonlinear vibration A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • Nonlinear vibration Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
  • Nonlinear viscoelastic Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
  • Nonlocal Elasticity Theory Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Nonlocal Elasticity Theory Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Nonlocal Elasticity Theory Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
  • Nonlocal Theory Nonlinear Flow-Induced Flutter Instability of Double CNTs Using Reddy Beam Theory [Volume 46, Issue 1, 2015, Pages 1-12]
  • Nonlocal Theory Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • Nonlocal thermoelasticity Rotating magneto-thermoelastic rod with finite length due to moving heat sources via Eringen’s nonlocal model [Volume 50, Issue 1, 2019, Pages 118-126]
  • Nonlocal thermos-elasticity Nonlocal thermoelastic semi-infinite medium with variable thermal conductivity due to a laser short-pulse [Volume 50, Issue 1, 2019, Pages 90-98]
  • Normal Mode Expansion Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
  • Normal stresses Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • No-slip boundary condition The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
  • Numerical model The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
  • Numerical simulation A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
  • Numerical Simulations Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Numerical solution A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
  • Numerical solution A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]

O

  • Octopod Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • OpenMP Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
  • Optimization An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
  • Optimization Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
  • Optimization Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
  • Optimization Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Optimization Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Optimization Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Optimization Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Optimization Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging [Volume 52, Issue 1, 2021, Pages 69-84]
  • Optimum design, Temperature-dependent thermal conductivity Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Orthotropic viscoelastic Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]

P

  • Padé approximants Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Parametric Design Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • Parametric resonance Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Parametric Study Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • Pareto Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
  • Partial vitreous liquefaction Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Particle Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
  • Particle diameter Numerical simulation of the effect of particle size on the erosion damage in ball valves of pressure reducing station [Volume 52, Issue 1, 2021, Pages 1-11]
  • Particle separation Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Particle sorting Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Passive Control Method Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
  • Passive walking Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel [Volume 46, Issue 1, 2015, Pages 63-68]
  • Passive walking From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • Pasternak foundation Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
  • PCM Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
  • Peak temperature Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Penman, Montieth and Unsworth method Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
  • People body vibration Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
  • Periodic boundary condition Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Permeable Stretching Sheet Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
  • Perturbation method Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Perturbation Technique An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • Perturbation Technique Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
  • Perturbation theory Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • PFRC theory Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
  • Phase lags Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
  • Phase-lags Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
  • Physical model A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
  • Piezoelastic Studying piezoelastic and piezomagnetoelastic configurations for different excitation frequencies in MEMS energy harvesters [Volume 47, Issue 2, 2016, Pages 241-246]
  • Piezoelectric A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
  • Piezoelectric nanowire Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
  • Pipe conveying fluid Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Plated bolted joints A review on stress distribution, strength and failure of bolted ‎composite joints [Volume 49, Issue 2, 2018, Pages 415-429]
  • Plate vibration Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Poiseuille Flow Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Pollution diffusion Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [(Articles in Press)]
  • Polyacrylamide polymer Performance Improvements of a Centrifugal Pump with Different Impellers using Polymer Additive [Volume 48, Issue 2, 2017, Pages 199-206]
  • Polymer Additives Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
  • Polymeric nano-composite Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
  • Polymer nanocomposites (PNCs) A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
  • Polypropylene matrix On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Poroelastic beam Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Porosities Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
  • Porosities Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • Porosity Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Porosity distribution A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
  • Porosity volume fraction A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
  • Porous channel On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
  • Porous channel On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • Porous Fin Analysis of Heat transfer in Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 271-284]
  • Porous medium properties Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
  • Post-buckling Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Power generation Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran [Volume 47, Issue 1, 2016, Pages 53-66]
  • Power Plant Effect of Wind on Thermal Performance of Heller Dry Cooling Tower [Volume 45, Issue 1, 2014, Pages 1-8]
  • Power-series Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
  • Power series method of Frobenius Introduction Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Power transmission Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Preconditioning A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Pressure Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Pressure distribution Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Pressure recovery factor Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
  • Pressure vessel Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Primary Cilium A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
  • Product Design A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Product Uniformity An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Progressive Collapse Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]
  • Propagation matrix Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Propagation matrix A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
  • Protein microtubules Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
  • Pump as turbine Numerical and Economic Study of Performance of Centrifugal Pump as Turbine [Volume 48, Issue 2, 2017, Pages 151-160]
  • Pure Aluminum Sheet Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]

Q

  • Quad Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]

R

  • Radiation Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
  • Radiation A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Railway wheel Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
  • Raman spectrometry Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
  • RANDOM FIBROUS NETWORK Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Rayleigh-Benard Convection Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • Rayleigh limit A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
  • Rayleigh number On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
  • Rectangular thick nanoplate A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
  • Rectangular thick plate Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Rectangular Waveguide Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
  • Reddy beam Nonlinear Flow-Induced Flutter Instability of Double CNTs Using Reddy Beam Theory [Volume 46, Issue 1, 2015, Pages 1-12]
  • Reflection matrix Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Reflection matrix A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
  • Regularized boundary condition The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
  • Regular perturbation method On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • Renewable Energies Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
  • Representative Volume Element (RVE) Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
  • Residual stress Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • Residual stress Numerical Analysis of explosion effects on the redistribution of residual stresses in the underwater welded pipe [Volume 47, Issue 1, 2016, Pages 121-128]
  • Resonant frequency Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
  • Response Surface Optimization The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • R-Glass/Epoxy Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Ring rolling Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • Ring rolling Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Ritz Method Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
  • Robot control Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Robot gait Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Robotic device Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Robotic mechanism Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Robot stability Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Rotating Fluids Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
  • Rotating thick cylinder Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Rough surface Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
  • Rule of Mixtures Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
  • Rule of Mixtures Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • Rule of Mixtures A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
  • Runner Angle Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]

S

  • S2-Glass/Epoxy Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Sandwich FG plates A new higher-order theory for the static and dynamic responses of sandwich FG plates [Volume 52, Issue 1, 2021, Pages 102-125]
  • Sandwich plate Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • Sandwich plate Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
  • Script Code Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • SDL A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
  • Second-order shear deformation Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • Semi-analytical method Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Sensitivity Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
  • Sensitivity Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Sensitivity analysis Updating finite element model using frequency domain decomposition method and bees algorithm [Volume 48, Issue 1, 2017, Pages 75-88]
  • Sensitivity analysis Evaluating computational performances of hyperelastic models on supraspinatus tendon uniaxial tensile test data [Volume 52, Issue 1, 2021, Pages 27-43]
  • Sensor Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]
  • Sensor Placement Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • Serial manipulator Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Series active variable-geometry suspension Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
  • SHAPE-MEMORY ALLOY (SMA) Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
  • Shape parameters An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
  • Shear and normal deformation A new higher-order theory for the static and dynamic responses of sandwich FG plates [Volume 52, Issue 1, 2021, Pages 102-125]
  • Shear deformation On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
  • Shear stress fields Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Shell A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
  • Shell and tube heat exchanger Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
  • Shell and tube heat exchanger Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Shell of revolution Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
  • Single phase flow Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Single-walled carbon nanotube On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Size effect Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
  • Sliding mode Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
  • SMA Actuator Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
  • Small scale Refined plate theory for free vibration analysis of FG nanoplates using the nonlocal continuum plate model [Volume 48, Issue 1, 2017, Pages 123-136]
  • Small scale effect Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
  • Smart Materials A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
  • Smart Water Injection Review of Enhanced Oil Recovery Decision Making in Complex Carbonate Reservoirs: Fluid Flow and Geomechanics Mechanisms [Volume 52, Issue 2, 2021, Pages 350-365]
  • Soft core Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
  • Softcore and hardcore On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
  • Soil bulk density Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
  • Soil compaction Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
  • Solar charging station Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
  • Sonography Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Source parameters Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
  • Special cells Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [(Articles in Press)]
  • Spectral Finite Element Method Unified refined beam theory applied to the Spectral Finite Element Method for analysis of laminated composites. [Volume 52, Issue 1, 2021, Pages 44-60]
  • Spherical Vessel Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • SPH method Replacing friction model with interaction between particles in analyzing orthogonal and rotational cutting processes using SPH method [Volume 52, Issue 2, 2021, Pages 297-306]
  • Spillways Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • Squeeze film damping Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
  • Stability Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]
  • Stability Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Stall margin Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Stand-off distance Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Static analysis 3-node Basic Displacement Functions in Analysis of Non-Prismatic Beams [Volume 46, Issue 1, 2015, Pages 77-91]
  • Static Magnetic Field Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
  • Static torsion Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
  • Statistical features A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
  • Steel deck Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Steering Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel [Volume 46, Issue 1, 2015, Pages 63-68]
  • Steering From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • Stenosis Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Stepped Spillway Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
  • STIFF INCLUSION Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Stiffness The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
  • Stiffness control Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Strain gradient theory Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
  • Strain gradient theory Size dependent nano-spherical pressure vessels based on strain gradient theory [Volume 52, Issue 2, 2021, Pages 307-319]
  • Stress analysis Size dependent nano-spherical pressure vessels based on strain gradient theory [Volume 52, Issue 2, 2021, Pages 307-319]
  • Stress distribution Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • Stress Intensity Factor A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
  • String stability A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
  • Subcooled flow boiling Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Subcooled flow boiling Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • Surface effects Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
  • Surface Enhanced Raman Spectroscopy (SERS) Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
  • Surface with a hole Four different types of a single drop dripping down a hole under gravity by lattice Boltzmann method [Volume 47, Issue 1, 2016, Pages 89-98]
  • Switched nonlinear cascade systems A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
  • S-W-S connection Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]

T

  • Taguchi Method Optimum parameters of nonlinear integrator using design of experiments based on Taguchi method [Volume 46, Issue 2, 2015, Pages 233-241]
  • Taxol Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
  • Temperature-Dependent Properties An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • Temperature-dependent thermal conductivity Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Temperature-Dependent Thermal Conductivity and Internal Heat Generation, Chebyshev spectral collocation method Analysis of Heat transfer in Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 271-284]
  • Temperature distribution Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
  • Temperature distribution An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • Temperature gradients Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Temperature profile Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Temperature profile Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Temperature-responsive hydrogel Kinetics of swelling of cylindrical functionally graded temperature-responsive hydrogels [Volume 51, Issue 2, 2020, Pages 464-471]
  • TGA Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
  • Thermal analyser NUMERICAL INVESTIGATION OF THE PERFORMANCE OF FIBRE-GLASS/TALC FILLED EPOXY COMPOSITE AS INSULATOR IN HEATING APPLICATIONS [(Articles in Press)]
  • Thermal barrier coating Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Thermal conductivity Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
  • Thermal conductivity coefficient On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Thermal Energy Storage Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
  • Thermal load Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
  • Thermal performance Analysis of Heat transfer in Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 271-284]
  • Thermal performance Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Thermal Shock Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Thermal stability Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Thermal Strain An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • Thermoelastic analysis Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
  • Thermoelasticity Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
  • Thermoelasticity Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
  • Thermoelasticity Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
  • Thermo-Mechanical Stress Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • Thermo-physical NUMERICAL INVESTIGATION OF THE PERFORMANCE OF FIBRE-GLASS/TALC FILLED EPOXY COMPOSITE AS INSULATOR IN HEATING APPLICATIONS [(Articles in Press)]
  • Thick cylindrical pressure vessel Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions [Volume 48, Issue 1, 2017, Pages 15-26]
  • Thickness of water layer Water thickness effect on the fin efficiency and heat transfer for partially wet-surface heat exchanger [Volume 47, Issue 2, 2016, Pages 195-207]
  • Thick plate A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Thick-walled A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
  • Thick-walled sphere Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Thin Elastic Layer A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
  • Third-order shear deformation Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • Three-Layer Plate Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
  • Three Stage Centrifugal Compressor Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
  • Time-Frequency Domain A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
  • Timoshenko Beam Theory Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
  • Tip gap Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Tissue modeling Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Topology optimization Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
  • Total Lagrangian Geometrically nonlinear analysis of axially functionally graded beams by using finite element method [Volume 51, Issue 2, 2020, Pages 411-416]
  • Transient analysis Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
  • Transient thermo-elastic Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions [Volume 48, Issue 1, 2017, Pages 15-26]
  • Trapezoidal V-shaped cantilever Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
  • Triangular Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
  • Triangular beam Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
  • Triangular sectioned weirs Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • Tube Hydroforming Simultaneous hydroforming of bulge- and T-zone in 304 stainless steel and 70/30 brass tubes [Volume 51, Issue 1, 2020, Pages 213-230]
  • Turbomachinery Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Turbulence fluid flow Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Turbulent Flow Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
  • Turning Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel [Volume 46, Issue 1, 2015, Pages 63-68]
  • Turning From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • T-way Simultaneous hydroforming of bulge- and T-zone in 304 stainless steel and 70/30 brass tubes [Volume 51, Issue 1, 2020, Pages 213-230]
  • Two-fluid model Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Two-fluid model Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Two phase flow Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Two phase flow Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Two-phase flow Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Two-phase flow Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]

U

  • UAV Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
  • Ultrasmall particles A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
  • Ultrasonic Guided Waves Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
  • Ultrasound imaging Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Ultraviolet Effects The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Under-Balanced Drilling Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Under-Balanced Drilling (UBD) Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Under-Balanced Drilling (UBD) Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Underwater explosion (UNDEX) Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Uniaxial stretching Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
  • Unimorph Piezoelectric vibrator Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
  • Unsteady flow Unsteady Magneto Hydro Dynamic Flow of a Second Order Fluid over an Oscillating Sheet with a Second Order Slip Flow Model [Volume 47, Issue 2, 2016, Pages 209-218]

V

  • Valve opening Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
  • Variable fill coupling Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Variable foundation Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Variable internal heat generation Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
  • Variable thermal conductivity Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
  • Variable thickness Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • Variable thickness Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Variational iteration method Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
  • Variation parameter method On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
  • VARTM Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
  • Vehicle safety Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
  • Vehicular platoons A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
  • Vibration Active control vibration of circular and rectangular plate with Quantitative Feedback Theory (QFT) Method [Volume 47, Issue 2, 2016, Pages 261-271]
  • Vibration A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Vibration A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Vibration Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • Vibrational analysis A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [(Articles in Press)]
  • Vibration analysis Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
  • Vibration analysis Refined plate theory for free vibration analysis of FG nanoplates using the nonlocal continuum plate model [Volume 48, Issue 1, 2017, Pages 123-136]
  • Vibration analysis Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Vibration analysis A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
  • Vibration and buckling analysis Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Vibration answer Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
  • Vibration energy harvesting Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
  • Vibrations Vibration of inhomogeneous fibrous laminated plates using an efficient and simple polynomial refined theory [Volume 52, Issue 2, 2021, Pages 233-245]
  • Viscoelastic Transient thermo-visco-elastic response of a functionally graded non-axisymmetric cylinder [Volume 46, Issue 2, 2015, Pages 191-204]
  • Viscoelastic Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model [Volume 50, Issue 1, 2019, Pages 148-156]
  • Viscoelastic The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Viscoelastic Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
  • Viscoelastic Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
  • Viscoelastic adhesive Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Viscoelastic annular plate Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
  • Visco-elastic foundation Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
  • Viscoelasticity An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
  • Viscoelastic model Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Viscoelastic-Newtonian fluid Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Viscoelastic properties Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
  • Viscoelastic RANS Model Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
  • Viscous On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
  • Vitreous Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • VOF model Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • Void fraction Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Volumetric NUMERICAL INVESTIGATION OF THE PERFORMANCE OF FIBRE-GLASS/TALC FILLED EPOXY COMPOSITE AS INSULATOR IN HEATING APPLICATIONS [(Articles in Press)]
  • Vortex Flow Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • VUMAT Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]

W

  • Wave Propagation Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
  • Wave Reflection Coefficient Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
  • Waviness A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
  • Weibull function Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran [Volume 47, Issue 1, 2016, Pages 53-66]
  • WENO schemes Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
  • Window To Wall Ratio (WWR) Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • Wood density Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]

X

  • XRD Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]

Y

  • YSZ Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]

Z

  • Zero-Energy Building Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • ZnO piezoelectric layer Nonlocal DQM for a Nonlinear Buckling Analysis of DLGSs Integrated with Zno Piezoelectric Layers [Volume 45, Issue 1, 2014, Pages 9-22]
  • Zonal methodology Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [(Articles in Press)]
  • Zou-He boundary condition The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]