An innovative formulation for buckling analysis of nano-tapered Timoshenko beams with axially varying materials

Document Type : Research Paper

Authors

1 Department of Civil Engineering, Faculty of Engineering, University of Kashan, Kashan, Iran.

2 Department of Innovation Engineering, Faculty of Engineering, Università del Salento, Lecce, Italy.

Abstract

This paper presents a novel and low-cost formula based on the first-order shear deformation theory and Eringen’s nonlocal elasticity theory for the stability analysis of tapered Timoshenko nanobeams with axially varying materials. The coupled governing differential equations of the problem, involving both the transverse displacements and rotations, stem from the energy method. Based on a mathematical manipulation, the system of equilibrium equations is converted to a novel single fifth-order differential equation with variable coefficients in terms of the vertical deflection, which is solved numerically to obtain the axial buckling load. The accuracy of the proposed formulation is first verified against the available literature, with the additional advantage related to its reduced computational effort, compared to other formulations. A systematic investigation is, thus, performed to check for the influence of the non-local parameter, power-law index, tapering ratio and length-to-thickness aspect ratio on the linear buckling strength of simply supported functionally graded nano-tapered Timoshenko beams. Due to the generality of the derived formula, it can be adjusted for the optimal design of Timoshenko nanobeams with favorable axial changes in material properties as well as the geometrical features.

Keywords

Main Subjects

[1]          F. Yang, A. Chong, D. Lam, P. Tong, Couple stress based strain gradient theory for elasticity, International journal of solids and structures, Vol. 39, No. 10, pp. 2731-2743, 2002.
[2]          M. E. Gurtin, J. Weissmüller, F. Larche, A general theory of curved deformable interfaces in solids at equilibrium, Philosophical Magazine A, Vol. 78, No. 5, pp. 1093-1109, 1998.
[3]          A. C. Eringen, Nonlocal polar elastic continua, International journal of engineering science, Vol. 10, No. 1, pp. 1-16, 1972.
[4]          A. Eringen, On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves, Journal of applied physics, Vol. 54, No. 9, pp. 4703-4710, 1983.
[5]          J. Reddy, Nonlocal theories for bending, buckling and vibration of beams, International journal of engineering science, Vol. 45, No. 2-8, pp. 288-307, 2007.
[6]          S. Pradhan, A. Sarkar, Analyses of tapered FGM beams with nonlocal theory, Structural Engineering and Mechanics, An Int'l Journal, Vol. 32, No. 6, pp. 811-833, 2009.
[7]          M. Aydogdu, A general nonlocal beam theory: its application to nanobeam bending, buckling and vibration, Physica E: Low-dimensional Systems and Nanostructures, Vol. 41, No. 9, pp. 1651-1655, 2009.
[8]          O. Civalek, B. Akgoz, Free vibration analysis of microtubules as cytoskeleton components: nonlocal Euler-Bernoulli beam modeling, 2010.
[9]          L.-L. Ke, Y.-S. Wang, Size effect on dynamic stability of functionally graded microbeams based on a modified couple stress theory, Composite Structures, Vol. 93, No. 2, pp. 342-350, 2011.
[10]        S. Mohanty, R. Dash, T. Rout, Static and dynamic stability analysis of a functionally graded Timoshenko beam, International Journal of Structural Stability and Dynamics, Vol. 12, No. 04, pp. 1250025, 2012.
[11]        M. Danesh, A. Farajpour, M. Mohammadi, Axial vibration analysis of a tapered nanorod based on nonlocal elasticity theory and differential quadrature method, Mechanics Research Communications, Vol. 39, No. 1, pp. 23-27, 2012.
[12]        B. Akgöz, Ö. mer Civalek, Buckling analysis of linearly tapered micro-columns based on strain gradient elasticity, Structural Engineering and Mechanics, An Int'l Journal, Vol. 48, No. 2, pp. 195-205, 2013.
[13]        P. Malekzadeh, M. Shojaee, Surface and nonlocal effects on the nonlinear free vibration of non-uniform nanobeams, Composites Part B: Engineering, Vol. 52, pp. 84-92, 2013.
[14]        S. Ghannadpour, B. Mohammadi, J. Fazilati, Bending, buckling and vibration problems of nonlocal Euler beams using Ritz method, Composite Structures, Vol. 96, pp. 584-589, 2013.
[15]        B. Akgöz, Ö. Civalek, Buckling analysis of functionally graded microbeams based on the strain gradient theory, Acta Mechanica, Vol. 224, No. 9, pp. 2185-2201, 2013.
[16]        L.-L. Ke, Y.-S. Wang, Free vibration of size-dependent magneto-electro-elastic nanobeams based on the nonlocal theory, Physica E: Low-Dimensional Systems and Nanostructures, Vol. 63, pp. 52-61, 2014.
[17]        O. Rahmani, O. Pedram, Analysis and modeling the size effect on vibration of functionally graded nanobeams based on nonlocal Timoshenko beam theory, International Journal of Engineering Science, Vol. 77, pp. 55-70, 2014.
[18]        S. Hosseini, O. Rahmani, Surface effects on buckling of double nanobeam system based on nonlocal Timoshenko model, International Journal of Structural Stability and Dynamics, Vol. 16, No. 10, pp. 1550077, 2016.
[19]        F. Ebrahimi, M. Reza Barati, Vibration analysis of nonlocal beams made of functionally graded material in thermal environment, The European Physical Journal Plus, Vol. 131, pp. 1-22, 2016.
[20]        F. Ebrahimi, G. R. Shaghaghi, M. Boreiry, A semi-analytical evaluation of surface and nonlocal effects on buckling and vibrational characteristics of nanotubes with various boundary conditions, International Journal of Structural Stability and Dynamics, Vol. 16, No. 06, pp. 1550023, 2016.
[21]        F. Ebrahimi, M. R. Barati, Buckling analysis of nonlocal third-order shear deformable functionally graded piezoelectric nanobeams embedded in elastic medium, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 39, pp. 937-952, 2017.
[22]        F. Ebrahimi, M. R. Barati, A nonlocal strain gradient refined beam model for buckling analysis of size-dependent shear-deformable curved FG nanobeams, Composite Structures, Vol. 159, pp. 174-182, 2017.
[23]        J.-S. Fang, D. Zhou, Free vibration analysis of rotating axially functionally graded tapered Timoshenko beams, International Journal of Structural Stability and Dynamics, Vol. 16, No. 05, pp. 1550007, 2016.
[24]        M. Mohandes, A. R. Ghasemi, Finite strain analysis of nonlinear vibrations of symmetric laminated composite Timoshenko beams using generalized differential quadrature method, Journal of Vibration and Control, Vol. 22, No. 4, pp. 940-954, 2016.
[25]        A. Ghasemi, M. Mohandes, Nonlinear free vibration of laminated composite Euler-Bernoulli beams based on finite strain using generalized differential quadrature method, Mechanics of Advanced Materials and Structures, Vol. 24, No. 11, pp. 917-923, 2017.
[26]        M. Mohandes, A. R. Ghasemi, Modified couple stress theory and finite strain assumption for nonlinear free vibration and bending of micro/nanolaminated composite Euler–Bernoulli beam under thermal loading, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 231, No. 21, pp. 4044-4056, 2017.
[27]        R. Ansari, R. Gholami, Size-dependent buckling and postbuckling analyses of first-order shear deformable magneto-electro-thermo elastic nanoplates based on the nonlocal elasticity theory, International Journal of Structural Stability and Dynamics, Vol. 17, No. 01, pp. 1750014, 2017.
[28]        K. K. Pradhan, S. Chakraverty, Natural frequencies of shear deformed functionally graded beams using inverse trigonometric functions, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 39, pp. 3295-3313, 2017.
[29]        M. Arefi, A. M. Zenkour, Size-dependent vibration and bending analyses of the piezomagnetic three-layer nanobeams, Applied Physics A, Vol. 123, pp. 1-13, 2017.
[30]        W.-R. Chen, H. Chang, Vibration analysis of functionally graded Timoshenko beams, International Journal of Structural Stability and Dynamics, Vol. 18, No. 01, pp. 1850007, 2018.
[31]        M. Mohammadi, A. Rastgoo, Primary and secondary resonance analysis of FG/lipid nanoplate with considering porosity distribution based on a nonlinear elastic medium, Mechanics of Advanced Materials and Structures, Vol. 27, No. 20, pp. 1709-1730, 2020.
[32]        M. Mohammadi, M. Hosseini, M. Shishesaz, A. Hadi, A. Rastgoo, Primary and secondary resonance analysis of porous functionally graded nanobeam resting on a nonlinear foundation subjected to mechanical and electrical loads, European Journal of Mechanics-A/Solids, Vol. 77, pp. 103793, 2019.
[33]        M. Mohammadi, A. Rastgoo, Nonlinear vibration analysis of the viscoelastic composite nanoplate with three directionally imperfect porous FG core, Structural Engineering and Mechanics, An Int'l Journal, Vol. 69, No. 2, pp. 131-143, 2019.
[34]        A. Farajpour, A. Rastgoo, M. Mohammadi, Vibration, buckling and smart control of microtubules using piezoelectric nanoshells under electric voltage in thermal environment, Physica B: Condensed Matter, Vol. 509, pp. 100-114, 2017.
[35]        A. Farajpour, M. H. Yazdi, A. Rastgoo, M. Loghmani, M. Mohammadi, Nonlocal nonlinear plate model for large amplitude vibration of magneto-electro-elastic nanoplates, Composite Structures, Vol. 140, pp. 323-336, 2016.
[36]        A. Farajpour, M. H. Yazdi, A. Rastgoo, M. Mohammadi, A higher-order nonlocal strain gradient plate model for buckling of orthotropic nanoplates in thermal environment, Acta Mechanica, Vol. 227, pp. 1849-1867, 2016.
[37]        M. Mohammadi, M. Safarabadi, A. Rastgoo, A. Farajpour, Hygro-mechanical vibration analysis of a rotating viscoelastic nanobeam embedded in a visco-Pasternak elastic medium and in a nonlinear thermal environment, Acta Mechanica, Vol. 227, pp. 2207-2232, 2016.
[38]        M. R. Farajpour, A. Rastgoo, A. Farajpour, M. Mohammadi, Vibration of piezoelectric nanofilm-based electromechanical sensors via higher-order non-local strain gradient theory, Micro & Nano Letters, Vol. 11, No. 6, pp. 302-307, 2016.
[39]        M. Baghani, M. Mohammadi, A. Farajpour, Dynamic and stability analysis of the rotating nanobeam in a nonuniform magnetic field considering the surface energy, International Journal of Applied Mechanics, Vol. 8, No. 04, pp. 1650048, 2016.
[40]        M. Goodarzi, M. Mohammadi, M. Khooran, F. Saadi, Thermo-mechanical vibration analysis of FG circular and annular nanoplate based on the visco-pasternak foundation, Journal of Solid Mechanics, Vol. 8, No. 4, pp. 788-805, 2016.
[41]        H. Asemi, S. Asemi, A. Farajpour, M. Mohammadi, Nanoscale mass detection based on vibrating piezoelectric ultrathin films under thermo-electro-mechanical loads, Physica E: Low-dimensional Systems and Nanostructures, Vol. 68, pp. 112-122, 2015.
[42]        M. Safarabadi, M. Mohammadi, A. Farajpour, M. Goodarzi, Effect of surface energy on the vibration analysis of rotating nanobeam, 2015.
[43]        M. Goodarzi, M. Mohammadi, A. Gharib, Techno-Economic Analysis of Solar Energy for Cathodic Protection of Oil and Gas Buried Pipelines in Southwestern of Iran, in Proceeding of, https://publications.waset.org/abstracts/33008/techno-economic-analysis-of …, pp.
[44]        M. Mohammadi, A. A. Nekounam, M. Amiri, The vibration analysis of the composite natural gas pipelines in the nonlinear thermal and humidity environment, in Proceeding of, https://civilica.com/doc/540946/, pp.
[45]        M. Goodarzi, M. Mohammadi, M. Rezaee, Technical Feasibility Analysis of PV Water Pumping System in Khuzestan Province-Iran, in Proceeding of, https://publications.waset.org/abstracts/18930/technical-feasibility …, pp.
[46]        M. Mohammadi, A. Farajpour, A. Moradi, M. Ghayour, Shear buckling of orthotropic rectangular graphene sheet embedded in an elastic medium in thermal environment, Composites Part B: Engineering, Vol. 56, pp. 629-637, 2014.
[47]        M. Mohammadi, A. Moradi, M. Ghayour, A. Farajpour, Exact solution for thermo-mechanical vibration of orthotropic mono-layer graphene sheet embedded in an elastic medium, Latin American Journal of Solids and Structures, Vol. 11, pp. 437-458, 2014.
[48]        M. Mohammadi, A. Farajpour, M. Goodarzi, F. Dinari, Thermo-mechanical vibration analysis of annular and circular graphene sheet embedded in an elastic medium, Latin American Journal of Solids and Structures, Vol. 11, pp. 659-682, 2014.
[49]        M. Mohammadi, A. Farajpour, M. Goodarzi, Numerical study of the effect of shear in-plane load on the vibration analysis of graphene sheet embedded in an elastic medium, Computational Materials Science, Vol. 82, pp. 510-520, 2014.
[50]        A. Farajpour, A. Rastgoo, M. Mohammadi, Surface effects on the mechanical characteristics of microtubule networks in living cells, Mechanics Research Communications, Vol. 57, pp. 18-26, 2014.
[51]        S. R. Asemi, M. Mohammadi, A. Farajpour, A study on the nonlinear stability of orthotropic single-layered graphene sheet based on nonlocal elasticity theory, Latin American Journal of Solids and Structures, Vol. 11, pp. 1541-1546, 2014.
[52]        M. Goodarzi, M. Mohammadi, A. Farajpour, M. Khooran, Investigation of the effect of pre-stressed on vibration frequency of rectangular nanoplate based on a visco-Pasternak foundation, 2014.
[53]        S. Asemi, A. Farajpour, H. Asemi, M. Mohammadi, Influence of initial stress on the vibration of double-piezoelectric-nanoplate systems with various boundary conditions using DQM, Physica E: Low-dimensional Systems and Nanostructures, Vol. 63, pp. 169-179, 2014.
[54]        S. Asemi, A. Farajpour, M. Mohammadi, Nonlinear vibration analysis of piezoelectric nanoelectromechanical resonators based on nonlocal elasticity theory, Composite Structures, Vol. 116, pp. 703-712, 2014.
[55]        M. Mohammadi, M. Ghayour, A. Farajpour, Free transverse vibration analysis of circular and annular graphene sheets with various boundary conditions using the nonlocal continuum plate model, Composites Part B: Engineering, Vol. 45, No. 1, pp. 32-42, 2013.
[56]        M. Mohammadi, M. Goodarzi, M. Ghayour, A. Farajpour, Influence of in-plane pre-load on the vibration frequency of circular graphene sheet via nonlocal continuum theory, Composites Part B: Engineering, Vol. 51, pp. 121-129, 2013.
[57]        M. Mohammadi, A. Farajpour, M. Goodarzi, R. Heydarshenas, Levy type solution for nonlocal thermo-mechanical vibration of orthotropic mono-layer graphene sheet embedded in an elastic medium, Journal of Solid Mechanics, Vol. 5, No. 2, pp. 116-132, 2013.
[58]        M. Mohammadi, A. Farajpour, M. Goodarzi, H. Mohammadi, Temperature Effect on Vibration Analysis of Annular Graphene Sheet Embedded on Visco-Pasternak Foundati, Journal of Solid Mechanics, Vol. 5, No. 3, pp. 305-323, 2013.
[59]        A. Farajpour, A. Shahidi, M. Mohammadi, M. Mahzoon, Buckling of orthotropic micro/nanoscale plates under linearly varying in-plane load via nonlocal continuum mechanics, Composite Structures, Vol. 94, No. 5, pp. 1605-1615, 2012.
[60]        M. Mohammadi, M. Goodarzi, M. Ghayour, S. Alivand, Small scale effect on the vibration of orthotropic plates embedded in an elastic medium and under biaxial in-plane pre-load via nonlocal elasticity theory, 2012.
[61]        A. Farajpour, M. Mohammadi, A. Shahidi, M. Mahzoon, Axisymmetric buckling of the circular graphene sheets with the nonlocal continuum plate model, Physica E: Low-dimensional Systems and Nanostructures, Vol. 43, No. 10, pp. 1820-1825, 2011.
[62]        A. Farajpour, M. Danesh, M. Mohammadi, Buckling analysis of variable thickness nanoplates using nonlocal continuum mechanics, Physica E: Low-dimensional Systems and Nanostructures, Vol. 44, No. 3, pp. 719-727, 2011.
[63]        H. Moosavi, M. Mohammadi, A. Farajpour, S. Shahidi, Vibration analysis of nanorings using nonlocal continuum mechanics and shear deformable ring theory, Physica E: Low-dimensional Systems and Nanostructures, Vol. 44, No. 1, pp. 135-140, 2011.
[64]        M. Mohammadi, M. Ghayour, A. Farajpour, Analysis of free vibration sector plate based on elastic medium by using new version differential quadrature method, Journal of solid mechanics in engineering, Vol. 3, No. 2, pp. 47-56, 2011.
[65]        A. Farajpour, M. Mohammadi, M. Ghayour, Shear buckling of rectangular nanoplates embedded in elastic medium based on nonlocal elasticity theory, in Proceeding of, www.civilica.com/Paper-ISME19-ISME19_390.html, pp. 390.
[66]        M. Mohammadi, A. Farajpour, A. R. Shahidi, Higher order shear deformation theory for the buckling of orthotropic rectangular nanoplates using nonlocal elasticity, in Proceeding of, www.civilica.com/Paper-ISME19-ISME19_391.html, pp. 391.
[67]        M. Mohammadi, A. Farajpour, A. R. Shahidi, Effects of boundary conditions on the buckling of single-layered graphene sheets based on nonlocal elasticity, in Proceeding of, www.civilica.com/Paper-ISME19-ISME19_382.html, pp. 382.
[68]        M. Mohammadi, M. Ghayour, A. Farajpour, Using of new version integral differential method to analysis of free vibration orthotropic sector plate based on elastic medium, in Proceeding of, www.civilica.com/Paper-ISME19-ISME19_497.html, pp. 497.
[69]        M. Mohammadi, A. Farajpour, A. Moradi, M. Hosseini, Vibration analysis of the rotating multilayer piezoelectric Timoshenko nanobeam, Engineering Analysis with Boundary Elements, Vol. 145, pp. 117-131, 2022.
[70]        M. Mohammadi, A. Farajpour, A. Rastgoo, Coriolis effects on the thermo-mechanical vibration analysis of the rotating multilayer piezoelectric nanobeam, Acta Mechanica, Vol. 234, No. 2, pp. 751-774, 2023/02/01, 2023.
[71]        M. Arefi, Size-dependent electro-elastic analysis of a three-layered piezoelectric doubly curved nano shell, Mechanics of Advanced Materials and Structures, Vol. 27, No. 23, pp. 1945-1965, 2020.
[72]        S. K. Jena, S. Chakraverty, M. Malikan, F. Tornabene, Stability analysis of single-walled carbon nanotubes embedded in winkler foundation placed in a thermal environment considering the surface effect using a new refined beam theory, Mechanics Based Design of Structures and Machines, Vol. 49, No. 4, pp. 581-595, 2021.
[73]        M. Soltani, F. Atoufi, F. Mohri, R. Dimitri, F. Tornabene, Nonlocal elasticity theory for lateral stability analysis of tapered thin-walled nanobeams with axially varying materials, Thin-Walled Structures, Vol. 159, pp. 107268, 2021.
[74]        M. Soltani, F. Atoufi, F. Mohri, R. Dimitri, F. Tornabene, Nonlocal analysis of the flexural–torsional stability for FG tapered thin-walled beam-columns, Nanomaterials, Vol. 11, No. 8, pp. 1936, 2021.
[75]        M. Karimi, K. Khorshidi, R. Dimitri, F. Tornabene, Size-dependent hydroelastic vibration of FG microplates partially in contact with a fluid, Composite Structures, Vol. 244, pp. 112320, 2020.
[76]        R. Selvamani, M. M. S. Jayan, R. Dimitri, F. Tornabene, F. Ebrahimi, Nonlinear magneto-thermo-elastic vibration of mass sensor armchair carbon nanotube resting on an elastic substrate, Curved and Layered Structures, Vol. 7, No. 1, pp. 153-165, 2020.
[77]        S. Asghar, M. N. Naeem, M. Hussain, M. Taj, A. Tounsi, Prediction and assessment of nonlocal natural frequencies of DWCNTs: Vibration analysis, Computers and Concrete, An International Journal, Vol. 25, No. 2, pp. 133-144, 2020.
[78]        H. Dai, H. Safarpour, Frequency and thermal buckling information of laminated composite doubly curved open nanoshell, Advances in nano research, Vol. 10, No. 1, pp. 1-14, 2021.
[79]        W. Weng, Y. Lu, V. Borjalilou, Size-dependent thermoelastic vibrations of Timoshenko nanobeams by taking into account dual-phase-lagging effect, The European Physical Journal Plus, Vol. 136, pp. 1-26, 2021.
[80]        X. Yue, X. Yue, V. Borjalilou, Generalized thermoelasticity model of nonlocal strain gradient Timoshenko nanobeams, Archives of Civil and Mechanical Engineering, Vol. 21, No. 3, pp. 124, 2021.
[81]        H. Danesh, M. Javanbakht, Free vibration analysis of nonlocal nanobeams: a comparison of the one-dimensional nonlocal integral Timoshenko beam theory with the two-dimensional nonlocal integral elasticity theory, Mathematics and Mechanics of Solids, Vol. 27, No. 4, pp. 557-577, 2022.
[82]        M. Fakher, S. Hosseini-Hashemi, Vibration of two-phase local/nonlocal Timoshenko nanobeams with an efficient shear-locking-free finite-element model and exact solution, Engineering with Computers, pp. 1-15, 2022.
[83]        M. Espo, S. M. Hosseini, M. H. Abolbashari, Bandgap characteristics of a piezoelectric phononic crystal Timoshenko nanobeam based on the modified couple stress and surface energy theories, Materials Today Communications, Vol. 33, pp. 104782, 2022.
[84]        M. Eltaher, R. Shanab, N. Mohamed, Analytical solution of free vibration of viscoelastic perforated nanobeam, Archive of Applied Mechanics, Vol. 93, No. 1, pp. 221-243, 2023.
[85]        Ö. Civalek, B. Uzun, M. Ö. Yaylı, Thermal buckling analysis of a saturated porous thick nanobeam with arbitrary boundary conditions, Journal of Thermal Stresses, Vol. 46, No. 1, pp. 1-21, 2023.
[86]        A. Eyvazian, C. Zhang, M. Alkhedher, S. Muhsen, M. A. Elkotb, Thermal buckling and post-buckling analyses of rotating Timoshenko microbeams reinforced with graphene platelet, Composite Structures, Vol. 304, pp. 116358, 2023.
[87]        K. Boyina, R. Piska, Wave propagation analysis in viscoelastic Timoshenko nanobeams under surface and magnetic field effects based on nonlocal strain gradient theory, Applied Mathematics and Computation, Vol. 439, pp. 127580, 2023.
[88]        M. Soltani, B. Asgarian, Finite element formulation for linear stability analysis of axially functionally graded nonprismatic timoshenko beam, International Journal of Structural Stability and dynamics, Vol. 19, No. 02, pp. 1950002, 2019.
[89]        M. Soltani, B. Asgarian, F. Jafarzadeh, Finite difference method for buckling analysis of tapered Timoshenko beam made of functionally graded material, AUT Journal of Civil Engineering, Vol. 4, No. 1, pp. 91-102, 2020.
[90]        M. Soltani, A. Gholamizadeh, Size-dependent buckling analysis of non-prismatic Timoshenko nanobeams made of FGMs rested on Winkler foundation, Journal of Numerical Methods in Civil Engineering, Vol. 3, No. 2, pp. 35-46, 2018.
[91]        R. Bellman, J. Casti, Differential quadrature and long-term integration, Journal of mathematical analysis and Applications, Vol. 34, No. 2, pp. 235-238, 1971.
[92]        A. Soltani, M. Soltani, Comparative study on the lateral stability strength of laminated composite and fiber-metal laminated I-shaped cross-section beams, Journal of Computational Applied Mechanics, Vol. 53, No. 2, pp. 190-203, 2022.
[93]        C. W. Bert, M. Malik, Differential quadrature method in computational mechanics: a review, 1996.
[94]        M. Soltani, Finite element modeling for buckling analysis of tapered axially functionally graded timoshenko beam on elastic foundation, Mechanics of Advanced Composite Structures, Vol. 7, No. 2, pp. 203-218, 2020.
[95]        M. Soltani, A. Soltani, O. Civalek, Interaction of the lateral buckling strength with the axial load for FG micro-sized I-section beam–columns, Thin-Walled Structures, Vol. 179, pp. 109616, 2022.
[96]        A. Shahba, R. Attarnejad, M. T. Marvi, S. Hajilar, Free vibration and stability analysis of axially functionally graded tapered Timoshenko beams with classical and non-classical boundary conditions, Composites Part B: Engineering, Vol. 42, No. 4, pp. 801-808, 2011.
Volume 54, Issue 1
March 2023
Pages 87-110
  • Receive Date: 27 January 2023
  • Revise Date: 01 February 2023
  • Accept Date: 03 February 2023