A review of functionally graded thick cylindrical and conical shells

Document Type : Review Paper

Authors

1 Department of Mechanical Engineering, Yasouj University, P.O.Box: 75914-353, Yasouj, Iran

2 School of Mechanical Engineering, College of Engineering, University of Tehran, Iran

Abstract

Thick shells have attracted much attention in recent years as intelligent and functional graded materials because of their unique properties. In this review paper, some critical issues and problems in the development of thick shells made from Functionally graded piezoelectric material (FGPM) are discussed. This review has been conducted on various types of methods which are available for thick shell analysis and mainly focuses on elasticity theories, shear deformation theory, simplified theories and mixed theories since they were widely used in the modeling of FG thick shells. It is expected that this comprehensive study will be very beneficial to everyone involved or interested in the shell models.

Keywords

Main Subjects

[1]           P. Destuynder, A classification of thin shell theories, Acta Applicandae Mathematicae, Vol. 4, No. 1, pp. 15-63, 1985.
[2]           X. X. Hu, T. Sakiyama, H. Matsuda, C. Morita, Vibration analysis of twisted conical shells with tapered thickness, International journal of engineering science, Vol. 40, No. 14, pp. 1579-1598, 2002.
[3]           M. Ghannad, G. H. Rahimi, M. Z. Nejad, Determination of displacements and stresses in pressurized thick cylindrical shells with variable thickness using perturbation technique, Mechanika, Vol. 18, No. 1, pp. 14-21, 2012.
[4]           M. D. Kashkoli, M. Z. Nejad, Effect of heat flux on creep stresses of thick-walled cylindrical pressure vessels, Journal of Applied Research and Technology, Vol. 12, No. 3, pp. 585-597, 2014.
[5]           W. Nowacki, Thermal stresses in shells, General Rep., Nonclassical shell problem, IASS, Warsaw, 1962.
[6]           B. Sundarasivarao, N. Ganesan, Deformation of varying thickness of conical shells subjected to axisymmetric loading with various end conditions, Engineering fracture mechanics, Vol. 39, No. 6, pp. 1003-1010, 1991.
[7]           A. Daneshmehr, A. Rajabpoor, A. Hadi, Size dependent free vibration analysis of nanoplates made of functionally graded materials based on nonlocal elasticity theory with high order theories, International Journal of Engineering Science, Vol. 95, pp. 23-35, 2015.
[8]           M. Z. Nejad, A. Rastgoo, A. Hadi, Exact elasto-plastic analysis of rotating disks made of functionally graded materials, International Journal of Engineering Science, Vol. 85, pp. 47-57, 2014..
[9]           M. Z. Nejad, A. Rastgoo, A. Hadi, Effect of exponentially-varying properties on displacements and stresses in pressurized functionally graded thick spherical shells with using iterative technique, Journal of Solid Mechanics Vol. 6, No. 4, pp. 366-377, 2014.
[10]         M. Z. Nejad, A. Hadi, Eringen's non-local elasticity theory for bending analysis of bi-directional functionally graded Euler-Bernoulli nano-beams, International Journal of Engineering Science, Vol. 106, pp. 1-9, 2016.
[11]         M. Z. Nejad, A. Hadi, A. Rastgoo, Buckling analysis of arbitrary two-directional functionally graded Euler-Bernoulli nano-beams based on nonlocal elasticity theory, International Journal of Engineering Science, Vol. 103, pp. 1-10, 2016.
[12]         M. Z. Nejad, A. Hadi, Non-local analysis of free vibration of bi-directional functionally graded Euler-Bernoulli nano-beams, International Journal of Engineering Science, Vol. 105, pp. 1-11, 2016.
[13]         A. Hadi, A. Rastgoo, A. Daneshmehr, F. Ehsani, Stress and Strain Analysis of Functionally Graded Rectangular Plate with Exponentially Varying Properties, Indian Journal of Materials Science, Vol. 2013, 2013.
[14]         M. Hosseini, M. Shishesaz, K. N. Tahan, A. Hadi, Stress analysis of rotating nano-disks of variable thickness made of functionally graded materials, International Journal of Engineering Science, Vol. 109, pp. 29-53, 12//, 2016.
[15]         Z. Mazarei, M. Z. Nejad, A. Hadi, Thermo-elasto-plastic analysis of thick-walled spherical pressure vessels made of functionally graded materials, International Journal of Applied Mechanics, Vol. 8, No. 04, Article Number: 1650054, 2016.  
[16]         M. M. Adeli, A. Hadi, M. Hosseini, H. H. Gorgani, Torsional vibration of nano-cone based on nonlocal strain gradient elasticity theory, The European Physical Journal Plus, Vol. 132, No. 9, pp. 393, September 18, 2017.
[17]         M. Hosseini, H. H. Gorgani, M. Shishesaz, A. Hadi, Size-Dependent Stress Analysis of Single-Wall Carbon Nanotube Based on Strain Gradient Theory, International Journal of Applied Mechanics, Vol. 9, No. 06, pp. 1750087, 2017.
[18]         M. Z. Nejad, A. Hadi, A. Farajpour, Consistent couple-stress theory for free vibration analysis of Euler-Bernoulli nano-beams made of arbitrary bi-directional functionally graded materials, Structural Engineering and Mechanics, Vol. 63, No. 2, pp. 161-169, 2017.  
[19]         M. Shishesaz, M. Hosseini, K. N. Tahan, A. Hadi, Analysis of functionally graded nanodisks under thermoelastic loading based on the strain gradient theory, Acta Mechanica, pp. 1-28, 2017.
[20]         M. Z. Nejad, P. Fatehi, Exact elasto-plastic analysis of rotating thick-walled cylindrical pressure vessels made of functionally graded materials, International Journal of Engineering Science, Vol. 86, pp. 26-43, 2015.
[21]         M. Z. Nejad, G. H. Rahimi, Deformations and stresses in rotating FGM pressurized thick hollow cylinder under thermal load, Scientific Research and Essays, Vol. 4, No. 3, pp. 131-140, 2009.
[22]         M. Z. Nejad, M. D. Kashkoli, Time-dependent thermo-creep analysis of rotating FGM thick-walled cylindrical pressure vessels under heat flux, International Journal of Engineering Science, Vol. 82, pp. 222-237, 2014.
[23]         M. Ghannad, M. Z. Nejad, Elastic analysis of pressurized thick hollow cylindrical shells with clamped-clamped ends, Mechanika, Vol. 85, No. 5, pp. 11-18, 2010.
[24]         M. Z. Nejad, G. H. Rahimi, Elastic analysis of FGM rotating cylindrical pressure vessels, Journal of the Chinese institute of engineers, Vol. 33, No. 4, pp. 525-530, 2010.
[25]         P. Fatehi, M. Z. Nejad, Effects of material gradients on onset of yield in FGM rotating thick cylindrical shells, International Journal of Applied Mechanics, Vol. 6, No. 4, Article Number: 1450038, 2014.
[26]         M. Z. Nejad, Z. Hoseini, A. Niknejad, M. Ghannad, Steady-state creep deformations and stresses in FGM rotating thick cylindrical pressure vessels, Journal of Mechanics, Vol. 31, No. 1, pp. 1-6, 2015.
[27]         H. Gharooni, M. Ghannad, M. Z. Nejad, Thermo-elastic analysis of clamped-clamped thick FGM cylinders by using third-order shear deformation theory, Latin American Journal of Solids and Structures, Vol. 13, No. 4, pp. 750-774, 2016.
[28]         M. D. Kashkoli, K. N. Tahan, M. Z. Nejad, Time-dependent creep analysis for life assessment of cylindrical vessels using first order shear deformation theory, Journal of Mechanics, Vol. 33, No. 4, pp. 461-474, 2017.
[29]         M. D. Kashkoli, K. N. Tahan, M. Z. Nejad, Time-dependent thermomechanical creep behavior of FGM thick hollow cylindrical shells under non-uniform internal pressure, International Journal of Applied Mechanics, Vol. 9, No. 6, Article Number: 1750086, 2017.
[30]         A. Afshin, M. Z. Nejad, K. Dastani, Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions, Journal of Computational Applied Mechanics, Vol. 48, No. 1, pp. 15-26, 2017.
[31]         M. Z. Nejad, M. Abedi, M. Lotfian, M. Ghannad, Exact and Numerical Elastic Analysis for the FGM Thick-Walled Cylindrical Pressure Vessels with Exponentially-Varying Properties, Archives of Metallurgy and Materials, Vol. 61, No. 3, pp. 1303-1308, 2016.
[32]         M. D. Kashkoli, M. Z. Nejad, Time-dependent thermo-elastic creep analysis of thick-walled spherical pressure vessels made of functionally graded materials, Journal of Theoretical and Applied Mechanics, Vol. 53, No. 4, pp. 1053-1065, 2015.
[33]         M. Ghannad, M. Z. Nejad, Elastic solution of pressurized clamped-clamped thick cylindrical shells made of functionally graded materials, Journal of Theoretical and Applied Mechanics, Vol. 51, No. 4, pp. 1067-1079, 2013.
[34]         M. Z. Nejad, M. Abedi, M. H. Lotfian, M. Ghannad, An exact solution for stresses and displacements of pressurized FGM thick-walled spherical shells with exponential-varying properties, Journal of Mechanical Science and Technology, Vol. 26, No. 12, pp. 4081-4087, 2012.
[35]         M. Ghannad, M. Z. Nejad, Elastic analysis of heterogeneous thick cylinders subjected to internal or external pressure using shear deformation theory, Acta Polytechnica Hungarica, Vol. 9, No. 6, pp. 117-136, 2012.
[36]         M. Ghannad, M. Z. Nejad, Complete elastic solution of pressurized thick cylindrical shells made of heterogeneous functionally graded materials, Mechanika, Vol. 18, No. 6, pp. 640-649, 2012.
[37]         M. Ghannad, M. Z. Nejad, Complete closed-form solution for pressurized heterogeneous thick spherical shells, Mechanika, Vol. 18, No. 5, pp. 508-516, 2012.
[38]         M. Z. Nejad, M. Abedi, M. Lotfian, M. Ghannad, The application of 2-dimensional elasticity for the elastic analysis of solid sphere made of exponential functionally graded material, Mechanika, Vol. 20, No. 3, pp. 254-258, 2014.
[39]         M. Gharibi, M. Z. Nejad, A. Hadi, Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius, Journal of Computational Applied Mechanics, Vol. 48, No. 1, pp. 89-98, 2017.
[40]         G. Praveen, J. Reddy, Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates, International Journal of Solids and Structures, Vol. 35, No. 33, pp. 4457-4476, 1998.
[41]         H.-L. Dai, Y.-N. Rao, T. Dai, A review of recent researches on FGM cylindrical structures under coupled physical interactions, 2000–2015, Composite Structures, Vol. 152, pp. 199-225, 2016.
[42]         H.-T. Thai, S.-E. Kim, A review of theories for the modeling and analysis of functionally graded plates and shells, Composite Structures, Vol. 128, pp. 70-86, 2015.
[43]         G. R. Kirchhoff, Uber das Gleichgewicht und die Bewegung einer elastischen Scheibe, 1850.
[44]         A. E. H. Love, The small free vibrations and deformation of a thin elastic shell, Philosophical Transactions of the Royal Society of London. A, Vol. 179, pp. 491-546, 1888.
[45]         G. Lamé, 1866, Leçons sur la théorie mathématique de l'elasticité des corps solides par G. Lamé, Gauthier-Villars,
[46]         H. H. Sherief, M. N. Anwar, A problem in generalized thermoelasticity for an infinitely long annular cylinder, International journal of engineering science, Vol. 26, No. 3, pp. 301-306, 1988.
[47]         Y. FUKUI, N. YAMANAKA, Elastic analysis for thick-walled tubes of functionally graded material subjected to internal pressure, JSME international journal. Ser. 1, Solid mechanics, strength of materials, Vol. 35, No. 4, pp. 379-385, 1992.
[48]         C. Horgan, A. Chan, The pressurized hollow cylinder or disk problem for functionally graded isotropic linearly elastic materials, Journal of Elasticity, Vol. 55, No. 1, pp. 43-59, 1999.
[49]         S. Timoshenko, 1940, Strength of materials Part 1, D. Van Nostrand Co., Inc,
[50]         N. Tutuncu, M. Ozturk, Exact solutions for stresses in functionally graded pressure vessels, Composites Part B: Engineering, Vol. 32, No. 8, pp. 683-686, 2001.
[51]         M. Jabbari, S. Sohrabpour, M. Eslami, Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads, International Journal of Pressure Vessels and Piping, Vol. 79, No. 7, pp. 493-497, 2002.
[52]         X.-H. Wu, Y.-P. Shen, C. Chen, An exact solution for functionally graded piezothermoelastic cylindrical shell as sensors or actuators, Materials Letters, Vol. 57, No. 22, pp. 3532-3542, 2003.
[52]         D. Galic, C. Horgan, The stress response of radially polarized rotating piezoelectric cylinders, TRANSACTIONS-AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF APPLIED MECHANICS, Vol. 70, No. 3, pp. 426-435, 2003.
[54]         A. Eraslan, T. Akis, On the plane strain and plane stress solutions of functionally graded rotating solid shaft and solid disk problems, Acta Mechanica, Vol. 181, No. 1, pp. 43-63, 2006.
[55]         H. Dai, Y. Fu, Z. Dong, Exact solutions for functionally graded pressure vessels in a uniform magnetic field, International Journal of Solids and Structures, Vol. 43, No. 18, pp. 5570-5580, 2006.
[56]         H. Xiang, Z. Shi, T. Zhang, Elastic analyses of heterogeneous hollow cylinders, Mechanics Research Communications, Vol. 33, No. 5, pp. 681-691, 2006.
[57]         Z. Shi, T. Zhang, H. Xiang, Exact solutions of heterogeneous elastic hollow cylinders, Composite structures, Vol. 79, No. 1, pp. 140-147, 2007.
[58]         N. Tutuncu, Stresses in thick-walled FGM cylinders with exponentially-varying properties, Engineering Structures, Vol. 29, No. 9, pp. 2032-2035, 2007.
[59]         A. Zenkour, Hygrothermoelastic responses of inhomogeneous piezoelectric and exponentially graded cylinders, International Journal of Pressure Vessels and Piping, Vol. 119, pp. 8-18, 2014.
[60]         M. Saadatfar, M. Aghaie-Khafri, Thermoelastic analysis of a rotating functionally graded cylindrical shell with functionally graded sensor and actuator layers on an elastic foundation placed in a constant magnetic field, Journal of Intelligent Material Systems and Structures, Vol. 27, No. 4, pp. 512-527, 2016.
[61]         M. Jabbari, M. Ghannad, M. Z. Nejad, Effect of Thickness Profile and FG Function on Rotating Disks Under Thermal and Mechanical Loading, Journal of Mechanics, Vol. 32, No. 1, pp. 35-46, 2016.
[62]         E. Reissner, A new derivation of the equations for the deformation of elastic shells, American Journal of Mathematics, Vol. 63, No. 1, pp. 177-184, 1941.
[63]         R. Mindlin, Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates, J. appl. Mech., Vol. 18, pp. 31, 1951.
[64]         I. Mirsky, G. Hermann, Axially motions of thick cylindrical shells, Journal of Applied Mechanic, Vol. 25, pp. 97-102, 1958.
[65]         X.-H. Wu, C. Chen, Y.-P. Shen, X.-G. Tian, A high order theory for functionally graded piezoelectric shells, International Journal of Solids and Structures, Vol. 39, No. 20, pp. 5325-5344, 2002.
[66]         H. Eipakchi, G. Rahimi, K. Esmaeilzadeh, Closed form solution for displacements of thick cylinders with varying thickness subjected to non-uniform internal pressure, Structural Engineering and Mechanics, Vol. 16, No. 6, pp. 731-748, 2003.
[67]         H. R. Eipakchi, S. Khadem, G. Rahimi S, Axisymmetric stress analysis of a thick conical shell with varying thickness under nonuniform internal pressure, Journal of engineering mechanics, Vol. 134, No. 8, pp. 601-610, 2008.
[68]         M. Bayat, M. Saleem, B. Sahari, A. Hamouda, E. Mahdi, Thermo elastic analysis of a functionally graded rotating disk with small and large deflections, Thin-Walled Structures, Vol. 45, No. 7, pp. 677-691, 2007.
[69]         M. Ghannad, M. Z. Nejad, G. H. Rahimi, Elastic solution of axisymmetric thick truncated conical shells based on first-order shear deformation theory, Mechanika, Vol. 79, No. 5, pp. 13-20, 2009.
[70]         H. R. Eipakchi, Third-order shear deformation theory for stress analysis of a thick conical shell under pressure, Journal of Mechanics of materials and structures, Vol. 5, No. 1, pp. 1-17, 2010.
[71]         M. Arefi, G. Rahimi, The effect of nonhomogeneity and end supports on the thermo elastic behavior of a clamped–clamped FG cylinder under mechanical and thermal loads, International Journal of Pressure Vessels and Piping, Vol. 96, pp. 30-37, 2012.
[72]         G. Rahimi, M. Arefi, M. Khoshgoftar, Electro elastic analysis of a pressurized thick-walled functionally graded piezoelectric cylinder using the first order shear deformation theory and energy method, Mechanics, Vol. 18, No. 3, pp. 292-300, 2012.
[73]         M. Ghannad, M. Z. Nejad, G. H. Rahimi, H. Sabouri, Elastic analysis of pressurized thick truncated conical shells made of functionally graded materials, Structural Engineering and Mechanics, Vol. 43, No. 1, pp. 105-126, 2012.  
[74]         M. Ghannad, G. H. Rahimi, M. Z. Nejad, Elastic analysis of pressurized thick cylindrical shells with variable thickness made of functionally graded materials, Composites Part B-Engineering, Vol. 45, No. 1, pp. 388-396, 2013.  
[75]         M. Z. Nejad, M. Jabbari, M. Ghannad, A semi-analytical solution for elastic analysis of rotating thick cylindrical shells with variable thickness using disk form multilayers, Scientific World Journal, Article Number: 932743, 2014.
[76]         M. Z. Nejad, M. Jabbari, M. Ghannad, A semi-analytical solution of thick truncated cones using matched asymptotic method and disk form multilayers, Archive of Mechanical Engineering, Vol. 61, No. 3, pp. 495-513, 2014.  
[77]         M. Z. Nejad, M. Jabbari, M. Ghannad, Elastic analysis of rotating thick truncated conical shells subjected to uniform pressure using disk form multilayers, ISRN Mechanical Engineering, Article ID: 764837, 2014.
[78]         E. Viola, L. Rossetti, N. Fantuzzi, F. Tornabene, Static analysis of functionally graded conical shells and panels using the generalized unconstrained third order theory coupled with the stress recovery, Composite Structures, Vol. 112, pp. 44-65, 2014.
[79]         M. Z. Nejad, M. Jabbari, M. Ghannad, Elastic analysis of axially functionally graded rotating thick cylinder with variable thickness under non-uniform arbitrarily pressure loading, International Journal of Engineering Science, Vol. 89, pp. 86-99, 2015.
[80]         M. Z. Nejad, M. Jabbari, M. Ghannad, Elastic analysis of FGM rotating thick truncated conical shells with axially-varying properties under non-uniform pressure loading, Composite Structures, Vol. 122, pp. 561-569, 2015.
[81]         S. Alsubari, J. M. Ali, Y. Aminanda, Hygrothermoelastic analysis of anisotropic cylindrical shells, Composite Structures, Vol. 131, pp. 151-159, 2015.
[82]         V. R. Kar, S. K. Panda, Thermoelastic analysis of functionally graded doubly curved shell panels using nonlinear finite element method, Composite Structures, Vol. 129, pp. 202-212, 2015.
[83]         J. Lai, C. Guo, J. Qiu, H. Fan, Static analytical approach of moderately thick cylindrical ribbed shells based on first-order shear deformation theory, Mathematical Problems in Engineering, Vol. 2015, 2015.
[84]         A. Sabik, I. Kreja, Thermo-elastic non-linear analysis of multilayered plates and shells, Composite Structures, Vol. 130, pp. 37-43, 2015.
[85]         J.-H. Zhang, G.-Z. Li, S.-R. Li, Y.-B. Ma, DQM-Based Thermal Stresses Analysis of a Functionally Graded Cylindrical Shell Under Thermal Shock, Journal of thermal stresses, Vol. 38, No. 9, pp. 959-982, 2015.
[86]         M. Jabbari, M. Z. Nejad, M. Ghannad, Thermo-elastic analysis of axially functionally graded rotating thick cylindrical pressure vessels with variable thickness under mechanical loading, International journal of engineering science, Vol. 96, pp. 1-18, 2015.  
[87]         M. Jabbari, M. Z. Nejad, M. Ghannad, Thermo-elastic analysis of axially functionally graded rotating thick truncated conical shells with varying thickness, Composites Part B-Engineering, Vol. 96, pp. 20-34, 2016.
[88]         M. Z. Nejad, M. Jabbari, M. Ghannad, A general disk form formulation for thermo-elastic analysis of functionally graded thick shells of revolution with arbitrary curvature and variable thickness, Acta Mechanica, Vol. 228, No. 1, pp. 215-231, 2017.
[89]         P. Naghdi, R. Cooper, Propagation of elastic waves in cylindrical shells, including the effects of transverse shear and rotatory inertia, The Journal of the Acoustical Society of America, Vol. 28, No. 1, pp. 56-63, 1956.
[90]         T. Irie, G. Yamada, Y. Kaneko, Free vibration of a conical shell with variable thickness, Journal of Sound and Vibration, Vol. 82, No. 1, pp. 83-94, 1982.
[91]         S. TAKAHASHI, K. SUZUKI, E. ANZAI, T. KOSAWADA, Axisymmetric vibrations of conical shells with variable thickness, Bulletin of JSME, Vol. 25, No. 209, pp. 1771-1780, 1982.
[92]         W. Cui, J. Pei, W. Zhang, A simple and accurate solution for calculating stresses in conical shells, Computers & Structures, Vol. 79, No. 3, pp. 265-279, 2001.
[93]         J. L. Pelletier, S. S. Vel, An exact solution for the steady-state thermoelastic response of functionally graded orthotropic cylindrical shells, International Journal of Solids and Structures, Vol. 43, No. 5, pp. 1131-1158, 2006.
[94]         A. Sofiyev, S. Huseynov, P. Ozyigit, F. Isayev, The effect of mixed boundary conditions on the stability behavior of heterogeneous orthotropic truncated conical shells, Meccanica, Vol. 50, No. 8, pp. 2153-2166, 2015.
[95]         D. Wu, L. Yu, B. Zhao, L. Yang, Y. Gao, The exact theory of axisymmetric electro-magneto-thermo-elastic circular cylinder, Journal of Intelligent Material Systems and Structures, Vol. 26, No. 7, pp. 770-780, 2015.
[96]         F. Witt, Thermal stress analysis of conical shells, Nuclear Structural Engineering, Vol. 1, No. 5, pp. 449-456, 1965.
[97]         G. F. Hausenbauer, G. C. Lee, Stresses in thick-walled conical shells, Nuclear Engineering and design, Vol. 3, No. 3, pp. 394-401, 1966.
[98]         I. Panferov, Stresses in a transversely isotropic conical elastic pipe of constant thickness under a thermal load, Journal of Applied Mathematics and Mechanics, Vol. 56, No. 3, pp. 410-415, 1992.
[99]         J.-Q. Tarn, Exact solutions for functionally graded anisotropic cylinders subjected to thermal and mechanical loads, International Journal of Solids and Structures, Vol. 38, No. 46, pp. 8189-8206, 2001.
[100]      M. Jabbari, S. Sohrabpour, M. Eslami, General solution for mechanical and thermal stresses in a functionally graded hollow cylinder due to nonaxisymmetric steady-state loads, Journal of Applied Mechanics, Vol. 70, No. 1, pp. 111-118, 2003.
[101]      K. Jane, Y. Wu, A generalized thermoelasticity problem of multilayered conical shells, International Journal of Solids and Structures, Vol. 41, No. 9, pp. 2205-2233, 2004.
[102]      Z. Shao, Mechanical and thermal stresses of a functionally graded circular hollow cylinder with finite length, International Journal of Pressure Vessels and Piping, Vol. 82, No. 3, pp. 155-163, 2005.
[103]      J.-H. Kang, Field equations, equations of motion, and energy functionals for thick shells of revolution with arbitrary curvature and variable thickness from a three-dimensional theory, Acta Mechanica, Vol. 188, No. 1, pp. 21-37, 2007.
[104]      M. Z. Nejad, G. H. Rahimi, M. Ghannad, Set of field equations for thick shell of revolution made of functionally graded materials in curvilinear coordinate system, Mechanika, Vol. 77, No. 3, pp. 18-26, 2009.
[105]      M. Arefi, G. Rahimi, Three-dimensional multi-field equations of a functionally graded piezoelectric thick shell with variable thickness, curvature and arbitrary nonhomogeneity, Acta Mechanica, Vol. 223, No. 1, pp. 63-79, 2012.
[106]      M. Dehghan, M. Z. Nejad, A. Moosaie, Thermo-electro-elastic analysis of functionally graded piezoelectric shells of revolution: Governing equations and solutions for some simple cases, International Journal of Engineering Science, Vol. 104, pp. 34-61, 2016.
[107]      M. Jabbari, M. Meshkini, M. Eslami, Mechanical and thermal stresses in a FGPM hollow cylinder due to non-axisymmetric loads, Journal of Solid Mechanics, Vol. 3, No. 1, pp. 19-41, 2011.
[108]      A. Alibeigloo, Thermoelastic solution for static deformations of functionally graded cylindrical shell bonded to thin piezoelectric layers, Composite Structures, Vol. 93, No. 2, pp. 961-972, 2011.
[109]      J. J. Fesharaki, V. J. Fesharaki, M. Yazdipoor, B. Razavian, Two-dimensional solution for electro-mechanical behavior of functionally graded piezoelectric hollow cylinder, Applied Mathematical Modelling, Vol. 36, No. 11, pp. 5521-5533, 2012.
[110]      V. Zozulya, C. Zhang, A high order theory for functionally graded axisymmetric cylindrical shells, International Journal of Mechanical Sciences, Vol. 60, No. 1, pp. 12-22, 2012.
[111]      R. A. Alashti, M. Khorsand, M. Tarahhomi, Three-dimensional asymmetric thermo-elastic analysis of a functionally graded rotating cylindrical shell, Journal of Theoretical and Applied Mechanics, Vol. 51, No. 1, pp. 143-158, 2013.
[112]      J. Reddy, C. Chin, Thermomechanical analysis of functionally graded cylinders and plates, Journal of thermal Stresses, Vol. 21, No. 6, pp. 593-626, 1998.
[113]      I. Raju, G. V. Rao, B. P. Rao, J. Venkataramana, A conical shell finite element, Computers & Structures, Vol. 4, No. 4, pp. 901-915, 1974.
[114]      N. Ganesan, R. Kadoli, Semianalytical finite element analysis of piezothermoelastic shells of revolution, Computers & structures, Vol. 83, No. 15, pp. 1305-1319, 2005.
[115]      J. Sladek, V. Sladek, P. Solek, P. Wen, S. Atluri, Thermal analysis of Reissner-Mindlin shallow shells with FGM properties by the MLPG, CMES: Computer Modeling in Engineering & Sciences, Vol. 30, No. 2, pp. 77-97, 2008.
[116]      S. M. Hosseini, J. Sladek, V. Sladek, Meshless local Petrov–Galerkin method for coupled thermoelasticity analysis of a functionally graded thick hollow cylinder, Engineering Analysis with Boundary Elements, Vol. 35, No. 6, pp. 827-835, 2011.
[117]      K. Asemi, M. Akhlaghi, M. Salehi, S. K. H. Zad, Analysis of functionally graded thick truncated cone with finite length under hydrostatic internal pressure, Archive of Applied Mechanics, Vol. 81, No. 8, pp. 1063-1074, 2011. 
Volume 48, Issue 2
December 2017
Pages 357-370
  • Receive Date: 14 November 2017
  • Revise Date: 14 December 2017
  • Accept Date: 15 December 2017