Real Time Finite Element Simulation of Thick and Thin Sandwich Plate with Viscoelastic Core and Embedded SMA Wires
Document Type : Research Paper
Authors
1 Renewable Energies Department, Niroo Research Institute (NRI)
2 Faculty of Mechanical Engineering, K.N. Toosi University of Technology, 19991-43344, Tehran, Iran
Abstract
In this paper, nonlinear dynamic analysis of sandwich plate with viscoelastic and flexible core and shape memory alloy embedded composite face sheets is performed. In order to simulate the dynamic behavior of sandwich plate, a higher order global-local theory based on the superposition principle is used. One of the most important advantage of presented theory is considering the thickness variation and transverse shear stresses, which is especially necessary in the study of thick sandwiches with soft core. In order to simulate the behavior of the shape memory alloy (SMA) wires, material properties variation are considered continuously in whole of the plate. In order to accurately investigate the behavior of the shape memory alloy, a written code is using an algorithm for solving the dynamic phase transformation base on modified Brinson model. The kinematic equations of phase transformation of embedded SMA wires are coupled with the equations of motion that leads to the nonlinearity and complexity of the equations. So to solve the equations, a development iterative method based on the formulation of nonlinear transient finite elements method with a dynamic phase transformation algorithm is used. The results show that the vibration amplitude of the sandwich plate is reduced due to energy dissipation because of the phase transformation of the SMA wires. Also, the core of the sandwich plate is considered of viscoelastic material. Due to the specific properties of the viscoelastic materials, the dynamic behavior of the structure and its consequence, the overall damping of the structure is affected. One of the previously unexplored studies is the simultaneous investigation of the damping effect of viscoelastic cores and embedded SMA wires. In other words, in this case, the sandwich plate has two different damping mechanisms with different function and nature that affect each other.
Keywords
Uncategorized References
[1] M. Fremond, Shape memory alloy, in: Shape memory alloys, Eds., pp. 1-68: Springer, 1996.
[2] R. S. Lakes, 2017, Viscoelastic solids, CRC press,
[3] D. C. Lagoudas, 2008, Shape memory alloys: modeling and engineering applications, Springer,
[4] W. Ostachowicz, M. Krawczuk, A. Żak, Natural frequencies of a multilayer composite plate with shape memory alloy wires, Finite Elements in Analysis and Design, Vol. 32, No. 2, pp. 71-83, 1999.
[5] W. Ostachowicz, M. Krawczuk, A. Żak, Dynamics and buckling of a multilayer composite plate with embedded SMA wires, Composite structures, Vol. 48, No. 1-3, pp. 163-167, 2000.
[6] T. L. Turner, A new thermoelastic model for analysis of shape memory alloy hybrid composites, Journal of Intelligent Material Systems and Structures, Vol. 11, No. 5, pp. 382-394, 2000.
[7] X.-Y. Tsai, L.-W. Chen, Dynamic stability of a shape memory alloy wire reinforced composite beam, Composite structures, Vol. 56, No. 3, pp. 235-241, 2002.
[8] J.-H. Roh, J.-H. Kim, Hybrid smart composite plate under low velocity impact, Composite Structures, Vol. 56, No. 2, pp. 175-182, 2002.
[9] J.-H. Roh, J.-H. Kim, Adaptability of hybrid smart composite plate under low velocity impact, Composites Part B: Engineering, Vol. 34, No. 2, pp. 117-125, 2003.
[10] Z. Hashin, Viscoelastic behavior of heterogeneous media, 1965.
[11] Y. Wang, T. Tsai, Static and dynamic analysis of a viscoelastic plate by the finite element method, Applied Acoustics, Vol. 25, No. 2, pp. 77-94, 1988.
[12] R. S. Lakes, A. Wineman, On Poisson’s ratio in linearly viscoelastic solids, Journal of Elasticity, Vol. 85, No. 1, pp. 45-63, 2006.
[13] J. Yang, J. Xiong, L. Ma, B. Wang, G. Zhang, L. Wu, Vibration and damping characteristics of hybrid carbon fiber composite pyramidal truss sandwich panels with viscoelastic layers, Composite Structures, Vol. 106, pp. 570-580, 2013.
[14] B. K. Eshmatov, Nonlinear vibrations and dynamic stability of viscoelastic orthotropic rectangular plates, Journal of Sound and Vibration, Vol. 300, No. 3-5, pp. 709-726, 2007.
[15] R. Alex, L. Schovanec, An anti-plane crack in a nonhomogeneous viscoelastic body, Engineering fracture mechanics, Vol. 55, No. 5, pp. 727-735, 1996.
[16] L. Schovanec, J. R. Walton, The quasi-static propagation of a plane strain crack in a power-law inhomogeneous linearly viscoelastic body, Acta mechanica, Vol. 67, No. 1, pp. 61-77, 1987.
[17] A. Assie, M. Eltaher, F. Mahmoud, Modeling of viscoelastic contact-impact problems, Applied Mathematical Modelling, Vol. 34, No. 9, pp. 2336-2352, 2010.
[18] A. Assie, M. Eltaher, F. Mahmoud, Behavior of a viscoelastic composite plates under transient load, Journal of mechanical science and technology, Vol. 25, No. 5, pp. 1129-1140, 2011.
[19] Y. Zhang, G. Jin, M. Chen, T. Ye, C. Yang, Y. Yin, Free vibration and damping analysis of porous functionally graded sandwich plates with a viscoelastic core, Composite Structures, Vol. 244, pp. 112298, 2020.
[20] S. H. Kordkheili, R. Khorasani, On the geometrically nonlinear analysis of sandwich shells with viscoelastic core: A layerwise dynamic finite element formulation, Composite Structures, Vol. 230, pp. 111388, 2019.
[21] M. Sheng, Z. Guo, Q. Qin, Y. He, Vibration characteristics of a sandwich plate with viscoelastic periodic cores, Composite Structures, Vol. 206, pp. 54-69, 2018.
[22] K. S. Ledi, M. Hamdaoui, G. Robin, E. M. Daya, An identification method for frequency dependent material properties of viscoelastic sandwich structures, Journal of Sound and Vibration, Vol. 428, pp. 13-25, 2018.
[23] M. Shariyat, S. Khalili, I. Rajabi, A global–local theory with stress recovery and a new post-processing technique for stress analysis of asymmetric orthotropic sandwich plates with single/dual cores, Computer Methods in Applied Mechanics and Engineering, Vol. 286, pp. 192-215, 2015.
[24] J. N. Reddy, 2003, Mechanics of laminated composite plates and shells: theory and analysis, CRC press,
[25] J. N. Reddy, 2006, Theory and analysis of elastic plates and shells, CRC press,
[26] E. Carrera, S. Brischetto, P. Nali, 2011, Plates and shells for smart structures: classical and advanced theories for modeling and analysis, John Wiley & Sons,
[27] S. M. R. Khalili, M. B. Dehkordi, E. Carrera, M. Shariyat, Non-linear dynamic analysis of a sandwich beam with pseudoelastic SMA hybrid composite faces based on higher order finite element theory, Composite Structures, Vol. 96, pp. 243-255, 2013.
[28] C. S. Babu, T. Kant, Refined higher order finite element models for thermal buckling of laminated composite and sandwich plates, Journal of thermal stresses, Vol. 23, No. 2, pp. 111-130, 2000.
[29] A. Nayak, S. Moy, R. Shenoi, A higher order finite element theory for buckling and vibration analysis of initially stressed composite sandwich plates, Journal of Sound and Vibration, Vol. 286, No. 4-5, pp. 763-780, 2005.
[30] K. Malekzadeh, M. Khalili, R. Mittal, Local and global damped vibrations of plates with a viscoelastic soft flexible core: an improved high-order approach, Journal of Sandwich Structures & Materials, Vol. 7, No. 5, pp. 431-456, 2005.
[31] M. Kheirikhah, S. Khalili, K. M. Fard, Biaxial buckling analysis of soft-core composite sandwich plates using improved high-order theory, European Journal of Mechanics-A/Solids, Vol. 31, No. 1, pp. 54-66, 2012.
[32] M. Shariyat, Thermal buckling analysis of rectangular composite plates with temperature-dependent properties based on a layerwise theory, Thin-Walled Structures, Vol. 45, No. 4, pp. 439-452, 2007.
[33] M. Di Sciuva, U. Icardi, L. Librescu, Effects of interfacial damage on the global and local static response of cross-ply laminates, International Journal of Fracture, Vol. 96, No. 1, pp. 17-35, 1999.
[34] R. G. Lage, C. M. Soares, C. M. Soares, J. Reddy, Analysis of adaptive plate structures by mixed layerwise finite elements, Composite Structures, Vol. 66, No. 1-4, pp. 269-276, 2004.
[35] D. Robbins Jr, J. Reddy, Modelling of thick composites using a layerwise laminate theory, International journal for numerical methods in engineering, Vol. 36, No. 4, pp. 655-677, 1993.
[36] J. Reddy, E. Barbero, J. Teply, A plate bending element based on a generalized laminate plate theory, International journal for numerical methods in engineering, Vol. 28, No. 10, pp. 2275-2292, 1989.
[37] C. Wanji, W. Zhen, A selective review on recent development of displacement-based laminated plate theories, Recent patents on mechanical engineering, Vol. 1, No. 1, pp. 29-44, 2008.
[38] R. Moreira, J. D. Rodrigues, A layerwise model for thin soft core sandwich plates, Computers & structures, Vol. 84, No. 19-20, pp. 1256-1263, 2006.
[39] D. Elmalich, O. Rabinovitch, A high-order finite element for dynamic analysis of soft-core sandwich plates, Journal of Sandwich Structures & Materials, Vol. 14, No. 5, pp. 525-555, 2012.
[40] O. Rabinovitch, Y. Frostig, High-order behavior of fully bonded and delaminated circular sandwich plates with laminated face sheets and a “soft” core, International journal of solids and structures, Vol. 39, No. 11, pp. 3057-3077, 2002.
[41] M. Ćetković, D. Vuksanović, Bending, free vibrations and buckling of laminated composite and sandwich plates using a layerwise displacement model, Composite structures, Vol. 88, No. 2, pp. 219-227, 2009.
[42] W. Zhen, C. Wanji, Free vibration of laminated composite and sandwich plates using global–local higher-order theory, Journal of Sound and Vibration, Vol. 298, No. 1-2, pp. 333-349, 2006.
[43] A. Ghaznavi, M. Shariyat, Higher-order global-local theory with novel 3D-equilibrium-based corrections for static, frequency, and dynamic analysis of sandwich plates with flexible auxetic cores, Mechanics of Advanced Materials and Structures, Vol. 26, No. 7, pp. 559-578, 2019.
[44] A. Ghaznavi, Modified Global-local theory for investigating composite and sandwich plates under static transverse loading, نشریه پژوهشی مهندسی مکانیک ایران, Vol. 20, No. 1, pp. 132-151, 2018.
[45] A. Ghaznavi, M. Shariyat, Non-linear layerwise dynamic response analysis of sandwich plates with soft auxetic cores and embedded SMA wires experiencing cyclic loadings, Composite Structures, Vol. 171, pp. 185-197, 2017.
[46] M. Shariyat, A. Ghaznavi, Influence analysis of phase transformation anisotropy of shape memory alloy wires embedded in sandwich plates with flexible cores by a third-order zigzag theory with dynamic three-dimensional elasticity corrections, Journal of Sandwich Structures & Materials, Vol. 22, No. 5, pp. 1450-1495, 2020.
[47] M. Mohammadi, A. Rastgoo, Primary and secondary resonance analysis of FG/lipid nanoplate with considering porosity distribution based on a nonlinear elastic medium, Mechanics of Advanced Materials and Structures, Vol. 27, No. 20, pp. 1709-1730, 2020.
[48] M. Mohammadi, M. Hosseini, M. Shishesaz, A. Hadi, A. Rastgoo, Primary and secondary resonance analysis of porous functionally graded nanobeam resting on a nonlinear foundation subjected to mechanical and electrical loads, European Journal of Mechanics-A/Solids, Vol. 77, pp. 103793, 2019.
[49] M. Mohammadi, A. Rastgoo, Nonlinear vibration analysis of the viscoelastic composite nanoplate with three directionally imperfect porous FG core, Structural Engineering and Mechanics, An Int'l Journal, Vol. 69, No. 2, pp. 131-143, 2019.
[50] A. Farajpour, A. Rastgoo, M. Mohammadi, Vibration, buckling and smart control of microtubules using piezoelectric nanoshells under electric voltage in thermal environment, Physica B: Condensed Matter, Vol. 509, pp. 100-114, 2017.
[51] M. Baghani, M. Mohammadi, A. Farajpour, Dynamic and stability analysis of the rotating nanobeam in a nonuniform magnetic field considering the surface energy, International Journal of Applied Mechanics, Vol. 8, No. 04, pp. 1650048, 2016.
[52] A. Farajpour, M. H. Yazdi, A. Rastgoo, M. Loghmani, M. Mohammadi, Nonlocal nonlinear plate model for large amplitude vibration of magneto-electro-elastic nanoplates, Composite Structures, Vol. 140, pp. 323-336, 2016.
[53] A. Farajpour, M. Yazdi, A. Rastgoo, M. Mohammadi, A higher-order nonlocal strain gradient plate model for buckling of orthotropic nanoplates in thermal environment, Acta Mechanica, Vol. 227, No. 7, pp. 1849-1867, 2016.
[54] M. R. Farajpour, A. Rastgoo, A. Farajpour, M. Mohammadi, Vibration of piezoelectric nanofilm-based electromechanical sensors via higher-order non-local strain gradient theory, Micro & Nano Letters, Vol. 11, No. 6, pp. 302-307, 2016.
[55] M. Mohammadi, M. Safarabadi, A. Rastgoo, A. Farajpour, Hygro-mechanical vibration analysis of a rotating viscoelastic nanobeam embedded in a visco-Pasternak elastic medium and in a nonlinear thermal environment, Acta Mechanica, Vol. 227, No. 8, pp. 2207-2232, 2016.
[56] H. Asemi, S. Asemi, A. Farajpour, M. Mohammadi, Nanoscale mass detection based on vibrating piezoelectric ultrathin films under thermo-electro-mechanical loads, Physica E: Low-dimensional Systems and Nanostructures, Vol. 68, pp. 112-122, 2015.
[57] M. Safarabadi, M. Mohammadi, A. Farajpour, M. Goodarzi, Effect of surface energy on the vibration analysis of rotating nanobeam, 2015.
[58] S. Asemi, A. Farajpour, H. Asemi, M. Mohammadi, Influence of initial stress on the vibration of double-piezoelectric-nanoplate systems with various boundary conditions using DQM, Physica E: Low-dimensional Systems and Nanostructures, Vol. 63, pp. 169-179, 2014.
[59] S. Asemi, A. Farajpour, M. Mohammadi, Nonlinear vibration analysis of piezoelectric nanoelectromechanical resonators based on nonlocal elasticity theory, Composite Structures, Vol. 116, pp. 703-712, 2014.
[60] S. R. Asemi, M. Mohammadi, A. Farajpour, A study on the nonlinear stability of orthotropic single-layered graphene sheet based on nonlocal elasticity theory, Latin American Journal of Solids and Structures, Vol. 11, No. 9, pp. 1515-1540, 2014.
[61] A. Farajpour, A. Rastgoo, M. Mohammadi, Surface effects on the mechanical characteristics of microtubule networks in living cells, Mechanics Research Communications, Vol. 57, pp. 18-26, 2014.
[62] M. Goodarzi, M. Mohammadi, A. Farajpour, M. Khooran, Investigation of the effect of pre-stressed on vibration frequency of rectangular nanoplate based on a visco-Pasternak foundation, 2014.
[63] M. Mohammadi, A. Farajpour, M. Goodarzi, F. Dinari, Thermo-mechanical vibration analysis of annular and circular graphene sheet embedded in an elastic medium, Latin American Journal of Solids and Structures, Vol. 11, pp. 659-682, 2014.
[64] M. Mohammadi, A. Farajpour, M. Goodarzi, Numerical study of the effect of shear in-plane load on the vibration analysis of graphene sheet embedded in an elastic medium, Computational Materials Science, Vol. 82, pp. 510-520, 2014.
[65] M. Mohammadi, A. Farajpour, A. Moradi, M. Ghayour, Shear buckling of orthotropic rectangular graphene sheet embedded in an elastic medium in thermal environment, Composites Part B: Engineering, Vol. 56, pp. 629-637, 2014.
[66] M. Mohammadi, A. Moradi, M. Ghayour, A. Farajpour, Exact solution for thermo-mechanical vibration of orthotropic mono-layer graphene sheet embedded in an elastic medium, Latin American Journal of Solids and Structures, Vol. 11, No. 3, pp. 437-458, 2014.
[67] M. Mohammadi, A. Farajpour, M. Goodarzi, R. Heydarshenas, Levy type solution for nonlocal thermo-mechanical vibration of orthotropic mono-layer graphene sheet embedded in an elastic medium, Journal of Solid Mechanics, Vol. 5, No. 2, pp. 116-132, 2013.
[68] M. Mohammadi, A. Farajpour, M. Goodarzi, H. Mohammadi, Temperature Effect on Vibration Analysis of Annular Graphene Sheet Embedded on Visco-Pasternak Foundati, Journal of Solid Mechanics, Vol. 5, No. 3, pp. 305-323, 2013.
[69] M. Mohammadi, M. Ghayour, A. Farajpour, Free transverse vibration analysis of circular and annular graphene sheets with various boundary conditions using the nonlocal continuum plate model, Composites Part B: Engineering, Vol. 45, No. 1, pp. 32-42, 2013.
[70] M. Mohammadi, M. Goodarzi, M. Ghayour, A. Farajpour, Influence of in-plane pre-load on the vibration frequency of circular graphene sheet via nonlocal continuum theory, Composites Part B: Engineering, Vol. 51, pp. 121-129, 2013.
[71] M. Danesh, A. Farajpour, M. Mohammadi, Axial vibration analysis of a tapered nanorod based on nonlocal elasticity theory and differential quadrature method, Mechanics Research Communications, Vol. 39, No. 1, pp. 23-27, 2012.
[72] A. Farajpour, A. Shahidi, M. Mohammadi, M. Mahzoon, Buckling of orthotropic micro/nanoscale plates under linearly varying in-plane load via nonlocal continuum mechanics, Composite Structures, Vol. 94, No. 5, pp. 1605-1615, 2012.
[73] M. Mohammadi, M. Goodarzi, M. Ghayour, S. Alivand, Small scale effect on the vibration of orthotropic plates embedded in an elastic medium and under biaxial in-plane pre-load via nonlocal elasticity theory, 2012.
[74] A. Farajpour, M. Danesh, M. Mohammadi, Buckling analysis of variable thickness nanoplates using nonlocal continuum mechanics, Physica E: Low-dimensional Systems and Nanostructures, Vol. 44, No. 3, pp. 719-727, 2011.
[75] A. Farajpour, M. Mohammadi, A. Shahidi, M. Mahzoon, Axisymmetric buckling of the circular graphene sheets with the nonlocal continuum plate model, Physica E: Low-dimensional Systems and Nanostructures, Vol. 43, No. 10, pp. 1820-1825, 2011.
[76] N. Ghayour, A. Sedaghat, M. Mohammadi, Wave propagation approach to fluid filled submerged visco-elastic finite cylindrical shells, 2011.
[77] H. Moosavi, M. Mohammadi, A. Farajpour, S. Shahidi, Vibration analysis of nanorings using nonlocal continuum mechanics and shear deformable ring theory, Physica E: Low-dimensional Systems and Nanostructures, Vol. 44, No. 1, pp. 135-140, 2011.
[78] M. Mohammadi, M. Ghayour, A. Farajpour, Analysis of free vibration sector plate based on elastic medium by using new version of differential quadrature method, Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, Vol. 3, No. 2, pp. 47-56, 2010.
[79] M. Goodarzi, M. Mohammadi, M. Khooran, F. Saadi, Thermo-mechanical vibration analysis of FG circular and annular nanoplate based on the visco-pasternak foundation, Journal of Solid Mechanics, Vol. 8, No. 4, pp. 788-805, 2016.
[80] M. Sedef, E. Samur, C. Basdogan, Real-time finite-element simulation of linear viscoelastic tissue behavior based on experimental data, IEEE Computer Graphics and Applications, Vol. 26, No. 6, pp. 58-68, 2006.
[81] E. Daya, M. Potier-Ferry, A numerical method for nonlinear eigenvalue problems application to vibrations of viscoelastic structures, Computers & Structures, Vol. 79, No. 5, pp. 533-541, 2001.
[82] Z. Huang, Z. Qin, F. Chu, A comparative study of finite element modeling techniques for dynamic analysis of elastic-viscoelastic-elastic sandwich structures, Journal of Sandwich Structures & Materials, Vol. 18, No. 5, pp. 531-551, 2016.
[83] M. Shariyat, M. Alipour, A novel shear correction factor for stress and modal analyses of annular FGM plates with non-uniform inclined tractions and non-uniform elastic foundations, International Journal of Mechanical Sciences, Vol. 87, pp. 60-71, 2014.
[84] M. Cho, K.-O. Kim, M.-H. Kim, Efficient higher-order shell theory for laminated composites, Composite Structures, Vol. 34, No. 2, pp. 197-212, 1996.
[85] W. Zhen, C. Wanji, A global-local higher order theory including interlaminar stress continuity and C0 plate bending element for cross-ply laminated composite plates, Computational Mechanics, Vol. 45, No. 5, pp. 387-400, 2010.
[86] M. Shariyat, An accurate double-superposition global–local theory for vibration and bending analyses of cylindrical composite and sandwich shells subjected to thermo-mechanical loads, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 225, No. 8, pp. 1816-1832, 2011.
[87] V. N. Burlayenko, T. Sadowski, Dynamic analysis of debonded sandwich plates with flexible core–Numerical aspects and simulation, in: Shell-like Structures, Eds., pp. 415-440: Springer, 2011.
[88] M. Shariyat, M. Alipour, Semi-analytical consistent zigzag-elasticity formulations with implicit layerwise shear correction factors for dynamic stress analysis of sandwich circular plates with FGM layers, Composites Part B: Engineering, Vol. 49, pp. 43-64, 2013.
[89] J. Argyris, D. Scharpf, Finite elements in time and space, The Aeronautical Journal, Vol. 73, No. 708, pp. 1041-1044, 1969.
[90] M. Brocca, L. Brinson, Z. Bažant, Three-dimensional constitutive model for shape memory alloys based on microplane model, Journal of the Mechanics and Physics of Solids, Vol. 50, No. 5, pp. 1051-1077, 2002.
[91] A. Araújo, C. Mota Soares, C. Mota Soares, Finite element model for hybrid active-passive damping analysis of anisotropic laminated sandwich structures, Journal of Sandwich Structures & Materials, Vol. 12, No. 4, pp. 397-419, 2010.
[92] Z. Huang, Z. Qin, F. Chu, Vibration and damping characteristics of sandwich plates with viscoelastic core, Journal of Vibration and Control, Vol. 22, No. 7, pp. 1876-1888, 2016.
[93] G. Wang, S. Veeramani, N. M. Wereley, Analysis of sandwich plates with isotropic face plates and a viscoelastic core, J. Vib. Acoust., Vol. 122, No. 3, pp. 305-312, 2000.
[94] A. Assie, M. Eltaher, F. Mahmoud, The response of viscoelastic-frictionless bodies under normal impact, International journal of mechanical sciences, Vol. 52, No. 3, pp. 446-454, 2010.
)
Volume 53, Issue 2
June 2022Pages 219-243
- Receive Date: 17 January 2022
- Revise Date: 15 April 2022
- Accept Date: 16 May 2022