Journal of Computational Applied Mechanics

Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates

Document Type : Research Paper

Authors

1 Department of Mechanical Engineering, Shahid Bahonar University of Kerman, Kerman, Iran

2 Department of Mechanical Engineering, Higher Education Complex of Bam, Bam, Iran

Abstract

This paper presents an analytical solution for stability analysis of thick rectangular functionally graded plates with porosity subjected to in-plane loadings using the higher-order shear and normal deformation plate theory, for the first time. The plate material and its porosity are assumed to vary along the thickness direction. Also, three types of porosity pattern along the thickness are considered. Since the plate structure is not generally symmetry to the mid-plane it is assumed that the in-plane loads are applied to its neutral plane to remove the bending-stretching coupling. Stability equations are derived and then analytically solved for rectangular plates with simple supports using Legendre orthonormal polynomials and Navier’s method to determine the critical buckling load. The results are then compared with estimates made using higher-order shear deformation (HSDT) and classical plate theories (CPT) available in the literature for FG non-porous plates. It is shown that compared to the HSDT, the HOSNDT yields smaller values for the plate critical buckling load and the effect of HSNDT is more important as the plate thickness increases. In addition, it is demonstrated that compared to the uniaxial load, the effect of HSNDT is greater as the plate is subjected to a biaxial compression load. Finally, the effects of the porosity distribution, porosity, power-law index, loading condition, and thickness ratio are studied in detail using HOSNDT. The results show that the porosity effect is greater in smaller values of the power law index parameter.

Keywords

Main Subjects

[1]          H. Altenbach, V. Rizov, Longitudinal Fracture Analysis of an Inhomogeneous Stepped Rod with Two Concentric Cracks in Torsion, Technische Mechanik-European Journal of Engineering Mechanics, Vol. 40, No. 2, pp. 149-159, 2020.
[2]          V. Bhavar, P. Kattire, S. Thakare, R. Singh, A review on functionally gradient materials (FGMs) and their applications, in Proceeding of, IOP Publishing, pp. 012021.
[3]          M. Choulaie, A. Bagheri, A. Khademifar, Nonlinear vibration and stability analysis of beam on the variable viscoelastic foundation, Journal of Computational Applied Mechanics, Vol. 48, No. 1, pp. 99-110, 2017.
[4]          G. Udupa, S. S. Rao, K. Gangadharan, Functionally graded composite materials: an overview, Procedia Materials Science, Vol. 5, pp. 1291-1299, 2014.
[5]          Y. Chen, F. W. Liou, Additive manufacturing of metal functionally graded materials: a review, 2018.
[6]          D. Mahmoud, M. A. Elbestawi, Lattice structures and functionally graded materials applications in additive manufacturing of orthopedic implants: a review, Journal of Manufacturing and Materials Processing, Vol. 1, No. 2, pp. 13, 2017.
[7]          F. Al Jahwari, A. A. Anwer, H. E. Naguib, Fabrication and microstructural characterization of functionally graded porous acrylonitrile butadiene styrene and the effect of cellular morphology on creep behavior, Journal of Polymer Science Part B: Polymer Physics, Vol. 53, No. 11, pp. 795-803, 2015.
[8]          F. Al Jahwari, Y. Huang, H. E. Naguib, J. Lo, Relation of impact strength to the microstructure of functionally graded porous structures of acrylonitrile butadiene styrene (ABS) foamed by thermally activated microspheres, Polymer, Vol. 98, pp. 270-281, 2016.
[9]          C. Han, Y. Li, Q. Wang, S. Wen, Q. Wei, C. Yan, L. Hao, J. Liu, Y. Shi, Continuous functionally graded porous titanium scaffolds manufactured by selective laser melting for bone implants, Journal of the mechanical behavior of biomedical materials, Vol. 80, pp. 119-127, 2018.
[10]        I. T. Ozbolat, A. B. Khoda, Design of a new parametric path plan for additive manufacturing of hollow porous structures with functionally graded materials, Journal of Computing and Information Science in Engineering, Vol. 14, No. 4, pp. 041005, 2014.
[11]        B. Goyal, A. Pandey, Critical review on porous material manufacturing techniques, properties & their applications, Materials Today: Proceedings, Vol. 46, pp. 8196-8203, 2021.
[12]        I. Yadroitsev, I. Shishkovsky, P. Bertrand, I. Smurov, Manufacturing of fine-structured 3D porous filter elements by selective laser melting, Applied Surface Science, Vol. 255, No. 10, pp. 5523-5527, 2009.
[13]        B. Koohbor, A. Kidane, Design optimization of continuously and discretely graded foam materials for efficient energy absorption, Materials & Design, Vol. 102, pp. 151-161, 2016.
[14]        S. Giannitelli, F. Basoli, P. Mozetic, P. Piva, F. Bartuli, F. Luciani, C. Arcuri, M. Trombetta, A. Rainer, S. Licoccia, Graded porous polyurethane foam: A potential scaffold for oro-maxillary bone regeneration, Materials Science and Engineering: C, Vol. 51, pp. 329-335, 2015.
[15]        F. Ebrahimi, F. Ghasemi, E. Salari, Investigating thermal effects on vibration behavior of temperature-dependent compositionally graded Euler beams with porosities, Meccanica, Vol. 51, pp. 223-249, 2016.
[16]        A. Rezaei, A. Saidi, M. Abrishamdari, M. P. Mohammadi, Natural frequencies of functionally graded plates with porosities via a simple four variable plate theory: an analytical approach, Thin-Walled Structures, Vol. 120, pp. 366-377, 2017.
[17]        Ş. D. Akbaş, Vibration and static analysis of functionally graded porous plates, Journal of Applied and Computational Mechanics, Vol. 3, No. 3, pp. 199-207, 2017.
[18]        Y. Q. Wang, J. W. Zu, Large-amplitude vibration of sigmoid functionally graded thin plates with porosities, Thin-Walled Structures, Vol. 119, pp. 911-924, 2017.
[19]        V. H. Nam, N. T. Phuong, D. T. Dong, N. T. Trung, N. V. Tue, Nonlinear thermo-mechanical buckling of higher-order shear deformable porous functionally graded material plates reinforced by orthogonal and/or oblique stiffeners, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 233, No. 17, pp. 6177-6196, 2019.
[20]        J. Zhao, K. Choe, F. Xie, A. Wang, C. Shuai, Q. Wang, Three-dimensional exact solution for vibration analysis of thick functionally graded porous (FGP) rectangular plates with arbitrary boundary conditions, Composites Part B: Engineering, Vol. 155, pp. 369-381, 2018.
[21]        A. G. Arani, Z. Khoddami Maraghi, M. Khani, I. Alinaghian, Free vibration of embedded porous plate using third-order shear deformation and poroelasticity theories, Journal of Engineering, Vol. 2017, 2017.
[22]        S. Enayat, M. Hashemian, D. Toghraie, E. Jaberzadeh, A comprehensive study for mechanical behavior of functionally graded porous nanobeams resting on elastic foundation, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 42, pp. 1-24, 2020.
[23]        A. Rezaei, A. Saidi, On the effect of coupled solid-fluid deformation on natural frequencies of fluid saturated porous plates, European Journal of Mechanics-A/Solids, Vol. 63, pp. 99-109, 2017.
[24]        A. Rezaei, A. Saidi, Exact solution for free vibration of thick rectangular plates made of porous materials, Composite Structures, Vol. 134, pp. 1051-1060, 2015.
[25]        M. Askari, A. R. Saidi, A. S. Rezaei, M. A. Badizi, Navier-type free vibration analysis of porous smart plates according to reddy’s plate theory, in Proceeding of, 13.
[26]        A. R. Khorshidvand, A. R. Damercheloo, Bending, axial buckling and shear buckling analyses of FG-porous plates based on a refined plate theory, Australian Journal of Mechanical Engineering, Vol. 21, No. 2, pp. 705-724, 2023.
[27]        V. Kumar, S. Singh, S. Harsha, Temperature dependent vibration characteristics of porous FG material plates utilizing FSDT, International Journal of Structural Stability and Dynamics, 2023.
[28]        M. Arefi, S. Firouzeh, E. M.-R. Bidgoli, Ö. Civalek, Analysis of porous micro-plates reinforced with FG-GNPs based on Reddy plate theory, Composite Structures, Vol. 247, pp. 112391, 2020.
[29]        A. Radwan, Quasi-3D integral model for thermomechanical buckling and vibration of FG porous nanoplates embedded in an elastic medium, International Journal of Mechanical Sciences, Vol. 157, pp. 320-335, 2019.
[30]        S. Bathini, K. Vijaya Kumar Reddy, Flexural behavior of porous functionally graded plates using a novel higher order theory, Journal of Computational Applied Mechanics, Vol. 51, No. 2, pp. 361-373, 2020.
[31]        Z. Zhou, Y. Wang, S. Zhang, R. Dimitri, F. Tornabene, K. Asemi, Numerical Study on the Buckling Behavior of FG Porous Spherical Caps Reinforced by Graphene Platelets, Nanomaterials, Vol. 13, No. 7, pp. 1205, 2023.
[32]        M. Khatoonabadi, M. Jafari, F. Kiarasi, M. Hosseini, M. Babaei, K. Asemi, Shear buckling response of FG porous annular sector plate reinforced by graphene platelet subjected to different shear loads, Journal of Computational Applied Mechanics, Vol. 54, No. 1, pp. 68-86, 2023.
[33]        K. Asemi, M. Babaei, F. Kiarasi, Static, natural frequency and dynamic analyses of functionally graded porous annular sector plates reinforced by graphene platelets, Mechanics Based Design of Structures and Machines, Vol. 50, No. 11, pp. 3853-3881, 2022.
[34]        E. Arshid, S. Amir, A. Loghman, Bending and buckling behaviors of heterogeneous temperature-dependent micro annular/circular porous sandwich plates integrated by FGPEM nano-Composite layers, Journal of Sandwich Structures & Materials, Vol. 23, No. 8, pp. 3836-3877, 2021.
[35]        M. Khatounabadi, M. Jafari, K. Asemi, Low-velocity impact analysis of functionally graded porous circular plate reinforced with graphene platelets, Waves in Random and Complex Media, pp. 1-27, 2022.
[36]        M. Babaei, F. Kiarasi, K. Asemi, M. Hosseini, Functionally graded saturated porous structures: A review, Journal of Computational Applied Mechanics, Vol. 53, No. 2, pp. 297-308, 2022.
[37]        K. Alhaifi, E. Arshid, A. R. Khorshidvand, Large deflection analysis of functionally graded saturated porous rectangular plates on nonlinear elastic foundation via GDQM, Steel and Composite Structures, An International Journal, Vol. 39, No. 6, pp. 795-809, 2021.
[38]        M. Babaei, K. Asemi, Stress analysis of functionally graded saturated porous rotating thick truncated cone, Mechanics Based Design of Structures and Machines, Vol. 50, No. 5, pp. 1537-1564, 2022.
[39]        M. Babaei, F. Kiarasi, K. Asemi, R. Dimitri, F. Tornabene, Transient thermal stresses in FG porous rotating truncated cones reinforced by graphene platelets, Applied Sciences, Vol. 12, No. 8, pp. 3932, 2022.
[40]        A. Naderi, A. Saidi, On pre-buckling configuration of functionally graded Mindlin rectangular plates, Mechanics Research Communications, Vol. 37, No. 6, pp. 535-538, 2010.
[41]        S. Coskun, J. Kim, H. Toutanji, Bending, free vibration, and buckling analysis of functionally graded porous micro-plates using a general third-order plate theory, Journal of Composites Science, Vol. 3, No. 1, pp. 15, 2019.
[42]        J. Kim, K. K. Żur, J. Reddy, Bending, free vibration, and buckling of modified couples stress-based functionally graded porous micro-plates, Composite Structures, Vol. 209, pp. 879-888, 2019.
[43]        D. Gilhooley, R. Batra, J. Xiao, M. McCarthy, J. Gillespie Jr, Analysis of thick functionally graded plates by using higher-order shear and normal deformable plate theory and MLPG method with radial basis functions, Composite Structures, Vol. 80, No. 4, pp. 539-552, 2007.
[44]        M. Abdollahi, A. Saidi, M. Mohammadi, Buckling analysis of thick functionally graded piezoelectric plates based on the higher-order shear and normal deformable theory, Acta Mechanica, Vol. 226, No. 8, pp. 2497-2510, 2015.
[45]        M. Bodaghi, A. Saidi, Levy-type solution for buckling analysis of thick functionally graded rectangular plates based on the higher-order shear deformation plate theory, Applied Mathematical Modelling, Vol. 34, No. 11, pp. 3659-3673, 2010.
[46]        I. Ramu, S. Mohanty, Buckling analysis of rectangular functionally graded material plates under uniaxial and biaxial compression load, Procedia Engineering, Vol. 86, pp. 748-757, 2014.
Journal of Computational Applied Mechanics
Volume 54, Issue 3
September 2023
Pages 347-364
  • Receive Date: 03 July 2023
  • Revise Date: 31 August 2023
  • Accept Date: 02 September 2023