AbbasiMoshaii, Alireza Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
Abdelkarim, Bouras Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
Abouali, Omid Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
Abouelregal, Ahmed Rotating magneto-thermoelastic rod with finite length due to moving heat sources via Eringen’s nonlocal model [Volume 50, Issue 1, 2019, Pages 118-126]
Abouelregal, Ahmed Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model [Volume 50, Issue 1, 2019, Pages 148-156]
Abouelregal, Ahmed Nonlocal thermoelastic semi-infinite medium with variable thermal conductivity due to a laser short-pulse [Volume 50, Issue 1, 2019, Pages 90-98]
Afshari, Asghar A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
Afzal, Seyed Ali Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
Agha Seyed Mirzabozorg, Mohsen Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
Akbaş, Şeref DoğuşcanAxially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
Akbaş, Şeref DoğuşcanBuckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
Alavi, Sayed Ehsan Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
Alavi, Sayed Ehsan Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
Alimirzaloo, Vali Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
Alipour, Farokh Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
Alizadeh, Asad Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
Alkasasbeh, Hamzeh A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
ALKhalafat, Shaima A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
Ansari, Mohammad Reza Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
Askari, Amir Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
Assari, Mohammad Reza Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
Awrejcewicz, Jan Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
Azami, Amirhossein The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
Azimi, Aziz Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
B
Barati, Abbas Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
Basaeri, Hamid Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
Bayat, Javad Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
Bazazzadeh, Mehrdad Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
C
Chahartaghi, Mahmood Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
Chahartaghi, Mahmoud Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
D
Dabbagh, Ali A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
Dai, HuLiang Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
Danehdezfuli, Alireza Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
Dargazany, Roozbeh Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
Djedid, Taloub Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
E
Ebrahimi, Farzad A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
El-Shahrany, Hela Vibration suppression analysis for laminated composite beams embedded actuating magnetostrictive layers [Volume 50, Issue 1, 2019, Pages 69-75]
Emdad, Homayoun Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
F
Falavand Jozaei, Ali Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
Falavand Jozaei, Ali Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
Falavand Jozaei, Ali Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
Farahat, Said Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
Farajpour, Mohammad Reza Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
Farajpour, Mohammad Reza Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
Faridi Rad, Nafise Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
G
Ghadle, Kirtiwant P.Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
Ghafouri, Ashkan Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
Ghannad, Mehdi Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
Ghannad, Mehdi Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
Gharooni, Hamed Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
Gharooni, Hamed Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
Ghasemi, Ahmad Reza Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
Ghasemi, Mohsen Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
Ghorbanhosseini, Sadegh Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
Grzelczyk, Dariusz Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
H
Haddad Soleymani, Siavash Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
Hadikhani, Pooria A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
Haghshenas Gorgani, Hamid Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
Hamoud, Ahmed A.Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
Hamzezade, Morteza Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
Heydarian, Ashkan The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
Heydari Shirazi, Kourosh Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]
Hosseini, Mohammad A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
I
Ike, Charles GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
J
Jarrahi Khameneh, armin The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
Javidi, Reza Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
Jiang, TianLi Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
K
Khorramymehr, Siamak The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
Kumar, Rajesh Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
L
Liu, ZhiYuan Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
M
Mahdavi Adeli, Mohsen Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
Mahdavi Adeli, Mohsen Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
Mahdavian, mohammad Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
Majidi, Sahand A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
Malekshahi, Ahmad Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]
Moghimi Zand, Mahdi Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
Mohandes, Masood Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
Mosalmani, Reza Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
Mousavi Khoram, Mehdi A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
N
Najafi, Farshid Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
Namazian, Zafar Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
Noghrehabadi, Aminreza Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
Noroozi, Reza Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
Norouzi, Saeed Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
O
Orak, Mohammad A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
P
Parvizi, Ali Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
Peyghambarzadeh, Seyed Mohsen Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
Q
Qadan, Hani A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
R
Rahimian, Mohamad Hasan Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
Rahul, Jagdeep Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
Ramakrishna, S Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
Rohani Rad, Elaheh Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
Rohani Rad, Elaheh Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
S
Salehi, Mehdi A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
Sarhaddi, Faramarz Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
Sarreshtehdari, Ali Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
Sawalmeh, Mohammed Z. A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
Seyyed Nosrati, Amin Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
Shekari, Younes Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
Shishesaz, Mohammad Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]
Shishesaz, Mohammad Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
Shishesaz, Mohammad A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
V
Vasaghi_Gharamaleki, Behnoosh The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
Vosough, Amir Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
W
Wang, Lin Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
Y
Yaghoubi, Mahmood Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
Yüksel, Yusuf ZiyaBuckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
Yaseen, Nusayba A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
Yousefikoma, Aghil Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
Z
Zakerzadeh, Mohamadreza Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
Zenkour, Ashraf Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model [Volume 50, Issue 1, 2019, Pages 148-156]
Zenkour, Ashraf Nonlocal thermoelastic semi-infinite medium with variable thermal conductivity due to a laser short-pulse [Volume 50, Issue 1, 2019, Pages 90-98]
Zhou, Kun Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
Zolfaghari, Naeem Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]