A

  • ABAQUS Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • Abdominal indentation Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Aircraft propellers Numerical and Neural Network Modeling and control of an Aircraft Propeller [Volume 49, Issue 1, 2018, Pages 63-69]
  • Airy's stress potential functions ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Aluminium alloy Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Analysis Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
  • Analysis of Variance Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • Anisotropy Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Artificial Neural Network Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Asymmetrical wire rolling Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]

B

  • Beltrami-Michell stress compatibilty equations ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Bennett Methodology Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • Boron Nitride Nanotube Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Bottom-Hole Pressure (BHP) Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • BOUC-WEN MODEL Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
  • Box-Behnken design Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • B-REP A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
  • Buckling analysis Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]

C

  • Carbon Nanotube Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Carbon nanotubes Longitudinal Magnetic Field Effect on Torsional Vibration of Carbon Nanotubes [Volume 49, Issue 2, 2018, Pages 304-313]
  • Casting Speed Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Central composite design Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • Centrifugal pump curves Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Centrifugal pump design Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Circular and annular nanoplate Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Cold rolling Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Computational fluid dynamic (CFD) Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Conical shells Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]
  • Convection Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
  • Convective-radiative fin Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • CSZ Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]

D

  • Differential equations of equilibrium ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Dimensionless Frequency Ratio Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]

E

  • ENGINEERING DRAWING A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
  • Euler-Bernoulli Beam Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]

F

  • Fatigue parameters Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • FEM Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • FEM Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • FG Nanoplates Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • Finite element A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
  • Finite Element Method Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Finite Element Method On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Finite Element Method Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Fluid coupling Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Free Vibration Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • Functional Graded Cable Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Functional graded nanoplate Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]

G

  • Genetic Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Genetic algorithm An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Genetic Algorithm A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]

H

  • Haar wavelet collocation method Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Heat transfer On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • HIGH EFFICIENCY DEEP GRINDING Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Homotopy Perturbation Method Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
  • HSDT Plate Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • Hydromechanical Deep Drawing An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Hyperelastic Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]
  • Hyperelastic Membrane Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • HYSTERESIS BEHAVIOR Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]

I

  • Internal heat generation Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]

K

  • Key Words: Binary Alloy Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Kirchhoff theory Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]

L

  • Lattice Boltzmann method Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • Lattice Boltzmann method The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
  • Legendre wavelet Collocation method Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Levenberg-Marquardt Numerical and Neural Network Modeling and control of an Aircraft Propeller [Volume 49, Issue 1, 2018, Pages 63-69]
  • Linear Elastic Fracture mechanics A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
  • Longitudinal fin Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]

M

  • Mach number Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • Macro-Segregation Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Magnetic Fluids Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
  • Magnetic nanoparticles, Magnetic field, Mechanical actuation, Chondrogenesis Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
  • Mathematical Modeling Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Maximum Reduction in Sheet Thickness An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Maxwell stress functions ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Mechanical properties Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
  • Mechanical Property Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Mechanotransduction Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
  • Mesh Density A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
  • Metaconcrete Dynamic behaviour of concrete containing aggregate resonant frequency [Volume 49, Issue 2, 2018, Pages 380-385]
  • Microstructure Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Microstructure Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
  • Modified couple stress Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
  • Modified couple stress theory Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Modified strain gradient theory Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Modulus of elasticity Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
  • Moving load Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Moving Mass Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Multi-boiling heat transfer Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]

N

  • Nanofluid On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • Nano-YSZ Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Neural Network An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Neutral Hole Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Nonlinear analysis Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Nonlinear Behavior A review on stress distribution, strength and failure of bolted ‚Äécomposite joints [Volume 49, Issue 2, 2018, Pages 415-429]
  • Nonlinear vibration Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
  • Nonlinear viscoelastic Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
  • Nonlocal Elasticity Theory Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Nonlocal Theory Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • No-slip boundary condition The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]

O

  • Optimization Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Optimization Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Optimization Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Optimum design, Temperature-dependent thermal conductivity Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]

P

  • Periodic boundary condition Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Plated bolted joints A review on stress distribution, strength and failure of bolted ‚Äécomposite joints [Volume 49, Issue 2, 2018, Pages 415-429]
  • Plate vibration Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Polypropylene matrix On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Porous channel On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • Power transmission Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Pressure distribution Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Product Uniformity An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Propagation matrix Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]

R

  • Radiation Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
  • Rayleigh-Benard Convection Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • Rectangular thick plate Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Reflection matrix Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Regularized boundary condition The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
  • Regular perturbation method On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • Ring rolling Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • Ring rolling Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Robotic device Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Rotating Fluids Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
  • Runner Angle Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]

S

  • Script Code Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • Sensor Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]
  • SHAPE-MEMORY ALLOY (SMA) Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
  • Single-walled carbon nanotube On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Stability Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]
  • Stress Intensity Factor A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]

T

  • Temperature-dependent thermal conductivity Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Temperature profile Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Thermal barrier coating Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Thermal conductivity Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
  • Thermal conductivity coefficient On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Thermal performance Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Thermal Shock Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Thermal stability Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Thermoelasticity Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
  • Thermo-Mechanical Stress Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • Tissue modeling Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Turbomachinery Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Turbulence fluid flow Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Two-fluid model Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]

U

  • Under-Balanced Drilling (UBD) Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]

V

  • Variable fill coupling Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Vibration analysis Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Viscoelastic model Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • VUMAT Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]

Y

  • YSZ Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]

Z

  • Zou-He boundary condition The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]