Abbasi, Morteza Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
Abouelregal, Ahmed Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
Abouelregal, Ahmed Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
Adegoke, Adeshina Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
Adewumi, Omowumi Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
Ahmadi, Firooz Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
Ahmadi Balootaki, Mohammad Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
Ai, Jafar Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
Akbaş, Şeref DoğuşcanComparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
Akbaş, Şeref DoğuşcanGeometrically nonlinear analysis of axially functionally graded beams by using finite element method [Volume 51, Issue 2, 2020, Pages 411-416]
Amiri, Alireza Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
A. Shirazi, Farzad Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
Attaran, Behrooz A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
Ayatolah Zadeh Shirazi, Farzad Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
B
B, Chinna Ankanna Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
Babadi, Mohammad Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
Barati, Abbas Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
Barati, Abbas Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
Bathini, Sidda Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
Bathini, Sidda ReddyFree vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
Bathini, Sidda ReddyA refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
Benbrik, Abderrahmane A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
Bouanani, Mohammed A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
C
Carreiras, Ana Rita The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
Chehardoli, Hossein A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
Cherifi, Mohammed A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
Couto, Rui The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
D
Dabbagh, Ali A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
Daneshmehr, Alireza Attractor Based Analysis of Centrally Cracked Plate Subjected to Chaotic Excitation [Volume 51, Issue 1, 2020, Pages 199-212]
E
Ebrahimi, Farzad A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
Ebrahimi-Barough, Somayeh Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
Eghtesad, Mohammad A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
Eskandari, Vahid Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
Etesami, Ghazal Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
F
Fakhar, Ahmad Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
Fakhar, Mohammad Hosein Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
Fashanu, Akin Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
Fatahi, Laleh Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
Felezi, Mohammad Ebrahim Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
Firouzi, Behnam Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
Fonseca, Elza M. M. The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
G
Ghanbarzadeh, Afshin A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
Ghannad, Mehdi An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
Ghazi Mirsaeed, Seyed Ali An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
Ghugal, Yuwaraj M.On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
H
Hadi, Amin Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
Hadi, Amin Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
Haghshenas Gorgani, Hamid A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
Hajidavalloo, Mohammad Reza Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
Hajnayeb, Ali Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
Hanafizadeh, Pedram Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
Hasanzadeh, Elham Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
Hassan, Amr Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
Hassannejad, Zahra Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
Hekmat, Mohamad Hamed A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
Hidayathulla Khan, B. Md Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
Hoseini, Mohamad Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
Hosseini, Mohammad Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
I
Ike, Charles ChinwubaElzaki transform method for finding solutions to two-dimensional elasticity problems in polar coordinates formulated using Airy stress functions [Volume 51, Issue 2, 2020, Pages 302-310]
Ike, Charles C. Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
Ike, Charles Chinwuba First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
J
Jahantigh Pak, Alireza A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
Jalili, Sina Attractor Based Analysis of Centrally Cracked Plate Subjected to Chaotic Excitation [Volume 51, Issue 1, 2020, Pages 199-212]
Jamali, Majid Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
Javanmard, Mohsen Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
K
K, Vijaya Kumar Reddy Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
K, Vijaya Kumar Reddy A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
Kalatjari, Vahidreza An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
Khalil, Khalil-M Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
Kirlangiç, Okan Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
L
Lemonnier, Denis A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
M
Mahjoob, Mohammad Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
Mahjoob, Mohammad Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
Mahmoodi, Narges Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
Mahmoudi, Mahnaz A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
Mama, Benjamin O. Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
Mama, Benjamin Okwudili First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
Martins, Diana The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
Mashhadi Keshtiban, Mohsen An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests [Volume 51, Issue 1, 2020, Pages 91-97]
Mashhadi Keshtiban, Peyman An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests [Volume 51, Issue 1, 2020, Pages 91-97]
Moeinkhah, Hossein A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
Mohammadi, Bijan Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
Moradi, Shapour A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
Moradi, Shapour Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
Mosavi Mashhadi, Mahmoud Simultaneous hydroforming of bulge- and T-zone in 304 stainless steel and 70/30 brass tubes [Volume 51, Issue 1, 2020, Pages 213-230]
Mousavi Khoram, Mehdi Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
N
Nariman-zadeh, Nader Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
Nasr, Mohamed Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
Nejadali, Jafar Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
Nekounam, Houra Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
Nikkhah bahrami, Mansoor A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
Norouzi, Saeed Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
Nouri-Bidgoli, Hossein Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
Nwoji, Clifford U. Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
Nwoji, Clifford Ugochukwu First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
O
Onah, Hyginus N. Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
Onah, Hyginus Nwankwo First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
Onyia, Michael E. Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
Onyia, Michael Ebie First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
Oyediran, Ayowole Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
P
Parhizkar Yaghoobi, Mohammad An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
R
Rahimi-Movaghar, Vafa Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
Rahmani, Hossein Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
Rahmanpour, Morteza A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
Ramachandra Prasad, V Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
Regbat, Milad An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests [Volume 51, Issue 1, 2020, Pages 91-97]
Riasi, Alireza Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
Saharkhiz, Saleh A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
Salehi Kolahi, Mohammad Reza A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
Sattari, Amirmohammad Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
Sayyad, Atteshamuddin S.On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
Shirpay, Ali Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
Shishesaz, Mohammad Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
Shojaee, Taghi Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
Sidig, Adam Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
Soleimani, Ali Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
T
Tabatabaei, Hamidreza Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
Taghipour birgani, Pezhman Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
Taghipour Birgani, Pezhman Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
Taheri, Mohammad Hasan Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
V
VENKATADRI, K Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
Venkata Lakshmi, C Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
Vijaya Kumar Reddy, K. Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
Zamanian, Mehdi Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
Zarezadeh, Esmail Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
Zargaripoor, Ali A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
Journal of Computational Applied Mechanics