Torsional wave propagation in 1D and two dimensional functionally graded rod

Document Type: Research Paper

Authors

Department of Mechanical Engineering,Faculty of Shahid Nikbakht Engineering,University of Sistan and Baluchestan,zahedan,Iran

Abstract

In this study, torsional wave propagation is investigated in a rod that are made of one and two dimensional functionally graded material. Firstly, the governing equations of the wave propagation in the functionally graded cylinder derived in polar coordinate. Secondly, finite difference method is used to discretize the equations. The Von Neumann stability approach is used to obtain the time step size. Two states are assumed for material distribution, in first state it’s considered that the material variation occurred only in radial direction(Ti6A14V and Al2O3) and in second state the material properties vary in radial and length directions(BN, Al 1100, Ti6A14V and Al2O3). Moreover, the effect of cutoff frequency and boundary condition in wave propagation is studied. The results was validated by comparing the analytical and numerical solutions for an isotropic rode subjected to a torsional impulsive load. The results show that the torsional wave propagation in FGM rod evidently effects by material composition variation.

Keywords


[1]           L. Pochhamer, Uber die Fortpflanzzungsgeshwindigkeiten kleiner Schwingungen in einem unbergrenzten isotropen Kreiscylinder, Zeitschrift fur Mathematik., Vol. 81, pp. 324, 1876.

[2]           C. Chree, The equations of an isotropic elastic solid in polar and cylindrical co-ordinates their solution and application, Transactions of the Cambridge Philosophical Society, Vol. 14, pp. 250, 1889.

[3]           A. E. H. Love, 1906, A treatise on the mathematical theory of elasticity, at the University Press,

[4]           H.-S. Shen, 2016, Functionally graded materials: nonlinear analysis of plates and shells, CRC press,

[5]           A. Berezovski, J. Engelbrecht, G. A. Maugin, Numerical simulation of two-dimensional wave propagation in functionally graded materials, European Journal of Mechanics-A/Solids, Vol. 22, No. 2, pp. 257-265, 2003.

[6]           R. M. Mahamood, E. T. Akinlabi, M. Shukla, S. Pityana, Functionally graded material: an overview, 2012.

[7]           M. Z. Nejad, A. Hadi, A. Rastgoo, Buckling analysis of arbitrary two-directional functionally graded Euler–Bernoulli nano-beams based on nonlocal elasticity theory, International Journal of Engineering Science, Vol. 103, pp. 1-10, 2016.

[8]           A. Daneshmehr, A. Rajabpoor, A. Hadi, Size dependent free vibration analysis of nanoplates made of functionally graded materials based on nonlocal elasticity theory with high order theories, International Journal of Engineering Science, Vol. 95, pp. 23-35, 2015.

[9]           M. Z. Nejad, A. Hadi, Non-local analysis of free vibration of bi-directional functionally graded Euler–Bernoulli nano-beams, International Journal of Engineering Science, Vol. 105, pp. 1-11, 2016.

[10]         M. Z. Nejad, A. Hadi, A. Farajpour, Consistent couple-stress theory for free vibration analysis of Euler-Bernoulli nano-beams made of arbitrary bi-directional functionally graded materials, Structural Engineering and Mechanics, Vol. 63, No. 2, pp. 161-169, 2017.

[11]         A. Hadi, M. Z. Nejad, A. Rastgoo, M. Hosseini, Buckling analysis of FGM Euler-Bernoulli nano-beams with 3D-varying properties based on consistent couple-stress theory, Steel and Composite Structures, Vol. 26, No. 6, pp. 663-672, 2018.

[12]         M. Hosseini, M. Shishesaz, A. Hadi, Thermoelastic analysis of rotating functionally graded micro/nanodisks of variable thickness, Thin-Walled Structures, Vol. 134, pp. 508-523, 2019.

[13]         M. Zamani Nejad, A. Rastgoo, A. Hadi, Effect of exponentially-varying properties on displacements and stresses in pressurized functionally graded thick spherical shells with using iterative technique, Journal of Solid Mechanics, Vol. 6, No. 4, pp. 366-377, 2014.

[14]         M. Shishesaz, M. Hosseini, K. N. Tahan, A. Hadi, Analysis of functionally graded nanodisks under thermoelastic loading based on the strain gradient theory, Acta Mechanica, Vol. 228, No. 12, pp. 4141-4168, 2017.

[15]         A. Barati, M. M. Adeli, A. Hadi, Static torsion of bi-directional functionally graded microtube based on the couple stress theory under magnetic field, International Journal of Applied Mechanics, 2020.

[16]         M. Z. Nejad, N. Alamzadeh, A. Hadi, Thermoelastoplastic analysis of FGM rotating thick cylindrical pressure vessels in linear elastic-fully plastic condition, Composites Part B: Engineering, Vol. 154, pp. 410-422, 2018.

[17]         R. Noroozi, A. Barati, A. Kazemi, S. Norouzi, A. Hadi, Torsional vibration analysis of bi-directional FG nano-cone with arbitrary cross-section based on nonlocal strain gradient elasticity, Advances in Nano Research, Vol. 8, No. 1, pp. 13-24, 2020.

[18]         T.-C. Chiu, F. Erdogan, One-dimensional wave propagation in a functionally graded elastic medium, Journal of Sound and Vibration, Vol. 222, No. 3, pp. 453-487, 1999.

[19]         S.-H. Chi, Y.-L. Chung, Mechanical behavior of functionally graded material plates under transverse load—Part I: Analysis, International Journal of Solids and Structures, Vol. 43, No. 13, pp. 3657-3674, 2006.

[20]         S.-H. Chi, Y.-L. Chung, Mechanical behavior of functionally graded material plates under transverse load—Part II: Numerical results, International Journal of Solids and Structures, Vol. 43, No. 13, pp. 3675-3691, 2006.

[21]         M. Dorduncu, M. K. Apalak, H. Cherukuri, Elastic wave propagation in functionally graded circular cylinders, Composites Part B: Engineering, Vol. 73, pp. 35-48, 2015.

[22]         L. Elmaimouni, J. Lefebvre, V. Zhang, T. Gryba, Guided waves in radially graded cylinders: a polynomial approach, Ndt & E International, Vol. 38, No. 5, pp. 344-353, 2005.

[23]         M. Dorduncu, M. K. Apalak, Stress wave propagation in adhesively bonded functionally graded circular cylinders, Journal of Adhesion Science and Technology, Vol. 30, No. 12, pp. 1281-1309, 2016.

[24]         J. Vollmann, D. M. Profunser, J. Bryner, J. Dual, Elastodynamic wave propagation in graded materials: simulations, experiments, phenomena, and applications, Ultrasonics, Vol. 44, pp. e1215-e1221, 2006.

[25]         D. Sun, S.-N. Luo, Wave propagation and transient response of a FGM plate under a point impact load based on higher-order shear deformation theory, Composite Structures, Vol. 93, No. 5, pp. 1474-1484, 2011.

[26]         K. Asemi, M. Akhlaghi, M. Salehi, Dynamic analysis of thick short length FGM cylinders, Meccanica, Vol. 47, No. 6, pp. 1441-1453, 2012.

[27]         M. Shakeri, M. Akhlaghi, S. Hoseini, Vibration and radial wave propagation velocity in functionally graded thick hollow cylinder, Composite structures, Vol. 76, No. 1-2, pp. 174-181, 2006.

[28]         J. Yu, X. Yang, J. Lefebvre, C. Zhang, Wave propagation in graded rings with rectangular cross-sections, Wave Motion, Vol. 52, pp. 160-170, 2015.

[29]         M. Asgari, Two dimensional functionally graded material finite thick hollow cylinder axisymmetric vibration mode shapes analysis based on exact elasticity theory, Journal of Theoretical and Applied Mechanics, Vol. 45, No. 2, pp. 3-20, 2015.

[30]         M. Asgari, Material optimization of functionally graded heterogeneous cylinder for wave propagation, Journal of Composite Materials, Vol. 50, No. 25, pp. 3525-3528, 2016.

[31]         H. R. Hamidzadeh, R. N. Jazar, 2010, Vibrations of thick cylindrical structures, Springer,

[32]         S. Xie, K. Liu, Transient torsional wave propagation in a transversely isotropic tube, Archive of Applied Mechanics, Vol. 68, No. 9, pp. 589-596, 1998.

[33]         H. Cherukuri, T. Shawki, A finite‐difference scheme for elastic wave propagation in a circular disk, The Journal of the Acoustical Society of America, Vol. 100, No. 4, pp. 2139-2155, 1996.

[34]         W. Johnson, 1983, Impact strength of materials.