Journal of Computational Applied Mechanics (JCAMECH) - Articles in Press

Volume & Issue: Articles in Press

Research Paper
1		Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests
	Articles in Press, Accepted Manuscript , Available Online from 03 October 2017
	Masoud Moeinzadeh; Sheyda Davaria; Farshid Najafi; Mojtaba Haghighi
	DOI: 10.22059/jcamech.2017.230947.133
	Show Article \| PDF (1274 K)

2		Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network
	Articles in Press, Accepted Manuscript , Available Online from 03 October 2017
	Ali Mohsenian; Mohamadreza Zakerzadeh; Masoud Shariat Panahi; Alireza fakhrzade
	DOI: 10.22059/jcamech.2017.234999.151
	Show Article \| PDF (1285 K)

3		Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer
	Articles in Press, Accepted Manuscript , Available Online from 10 October 2017
	Amin Seyyednosrati; Ali Parvizi; Seyed Ali Afzal; Vali Alimirzaloo
	DOI: 10.22059/jcamech.2017.239277.173
	Show Article \| PDF (1310 K)

4		Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions
	Articles in Press, Accepted Manuscript , Available Online from 10 October 2017
	Afshin Ashofteh; Mahmoud Mosavi Mashhadi; Ahmad Ali Amadeh
	DOI: 10.22059/jcamech.2017.239313.174
	Show Article \| PDF (1406 K)

5		Dynamics of Nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory
	Articles in Press, Accepted Manuscript , Available Online from 10 October 2017
	Reza Javidi; Mahdi Moghimi Zand; Kia Dastani
	DOI: 10.22059/jcamech.2017.238716.169
	Show Article \| PDF (1389 K)

6		Numerical and Neural Network Modeling and control of an Aircraft Propeller
	Articles in Press, Accepted Manuscript , Available Online from 20 December 2017
	Hami Tourajizadeh; Soleiman Manteghi; Saeed Rafee Nekoo
	DOI: 10.22059/jcamech.2017.237729.162
	Show Article

7		Transverse Sensing of Simply Supported Truncated Conical Shells
	Articles in Press, Accepted Manuscript , Available Online from 20 December 2017
	Rasa Jamshidi; A.A. Jafari
	DOI: 10.22059/jcamech.2017.238393.167
	Show Article

8		Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters
	Articles in Press, Accepted Manuscript , Available Online from 20 December 2017
	Hamid Reza Fazli Shahri; Ali Akbar Akbari; Ramezanali Mahdavinezhad; Ali Solati
	DOI: 10.22059/jcamech.2017.238724.170
	Show Article \| PDF (1518 K)

9		Strongly Stable Multi-time Stepping Method with the Option of Controlling Amplitude Decay in Responses
	Articles in Press, Accepted Manuscript , Available Online from 20 December 2017
	Saeed Mohammadzadeh; Mehdi Ghassemieh
	DOI: 10.22059/jcamech.2017.241371.183
	Show Article

10		Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method
	Articles in Press, Accepted Manuscript , Available Online from 20 December 2017
	Lawrence Olumide Jayesimi; George Ade Oguntala
	DOI: 10.22059/jcamech.2017.241682.186
	Show Article

11		Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition
	Articles in Press, Accepted Manuscript , Available Online from 20 December 2017
	Mostafa Varmazyar; Mohammadreza habibi; Arash Mohammadi
	DOI: 10.22059/jcamech.2017.243410.197
	Show Article

12		Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation
	Articles in Press, Accepted Manuscript , Available Online from 20 December 2017
	GEORGE A OGUNTALA; Raed A Abd-Alhameed; Gbeminiyi Musibau Sobamowo; Isa M. Danjuma
	DOI: 10.22059/jcamech.2017.244988.203
	Show Article

13		On the thermal conductivity of carbon nanotube/polypropylene nanocomposites by finite element method
	Articles in Press, Accepted Manuscript , Available Online from 20 December 2017
	Saeed Rouhi; Reza Ansari; Masoud Ahmadi
	DOI: 10.22059/jcamech.2017.243530.195
	Show Article

14		Investigation of energy consumption reduction in multistage compression process and its solutions
	Articles in Press, Accepted Manuscript , Available Online from 09 January 2018
	Mahmoud Chahartaghi; Sayed Ehsan Alavi; Ali Sarreshtehdari
	DOI: 10.22059/jcamech.2018.247328.217
	Show Article

15		Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method
	Articles in Press, Accepted Manuscript , Available Online from 11 January 2018
	Ali Falavand Jozaei; Asad Alizadeh; Ashkan Ghafouri
	DOI: 10.22059/jcamech.2018.243247.193
	Show Article

16		Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire
	Articles in Press, Accepted Manuscript , Available Online from 11 January 2018
	Behzad Pasoodeh; Ali Parvizi; Hamid Akbari
	DOI: 10.22059/jcamech.2018.246027.208
	Show Article

17		Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology
	Articles in Press, Accepted Manuscript , Available Online from 14 January 2018
	Jaimon D Quadros; S. A. Khan; Antony A. J.
	DOI: 10.22059/jcamech.2018.248043.221
	Show Article

18		Finite Element Investigation and comparing different models of wrist prosthesis
	Articles in Press, Accepted Manuscript , Available Online from 18 January 2018
	Mohammad Minaroodi; Siham Touchal
	DOI: 10.22059/jcamech.2018.248194.222
	Show Article

19		Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves
	Articles in Press, Accepted Manuscript , Available Online from 18 January 2018
	Amir Javanbakht; hossein ahmadi danesh ashtian
	DOI: 10.22059/jcamech.2018.246099.211
	Show Article

20		Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model
	Articles in Press, Accepted Manuscript , Available Online from 18 January 2018
	Ahmad Reza Ghasemi; Masood Mohandes
	DOI: 10.22059/jcamech.2018.242233.189
	Show Article

21		An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm
	Articles in Press, Accepted Manuscript , Available Online from 20 January 2018
	Saeed Yaghoubi; Faramarz Fereshteh-saniee
	DOI: 10.22059/jcamech.2018.246043.209
	Show Article

22		Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach
	Articles in Press, Accepted Manuscript , Available Online from 20 January 2018
	Ali Zargaripoor; Arian Bahrami; Mansoor Nikkhah bahrami
	DOI: 10.22059/jcamech.2018.249468.227
	Show Article

23		Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling
	Articles in Press, Accepted Manuscript , Available Online from 26 January 2018
	Keivan Narooei; Milad Arman
	DOI: 10.22059/jcamech.2018.245070.204
	Show Article

24		Numerical simulation of the effect of particle size on the erosion damage in ball valves of pressure reducing station
	Articles in Press, Accepted Manuscript , Available Online from 27 January 2018
	Amir Askari; Ali Falavand Jozaei
	DOI: 10.22059/jcamech.2018.246057.219
	Show Article

25		Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity
	Articles in Press, Accepted Manuscript , Available Online from 23 February 2018
	AKINBOWALE T. AKINSHILO; Joseph Olofinkua
	DOI: 10.22059/jcamech.2018.250910.236
	Show Article

26		Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method
	Articles in Press, Accepted Manuscript , Available Online from 01 February 2018
	Ali Zargaripoor; Alireza Daneshmehr; Imman Isaac Hosseini; Amir Rajabpoor
	DOI: 10.22059/jcamech.2018.248906.223
	Show Article

27		Size-dependent on vibration and flexural sensitivity of atomic force microscope
	Articles in Press, Accepted Manuscript , Available Online from 16 February 2018
	Reza Javidi; Hamid Haghshenas Gorgani; Mohsen Mahdavi Adeli
	DOI: 10.22059/jcamech.2018.250335.233
	Show Article

28		Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading
	Articles in Press, Accepted Manuscript , Available Online from 01 March 2018
	Ali Negahban; Ehsan Barati; Abdolali Maracy
	DOI: 10.22059/jcamech.2018.249708.230
	Show Article

29		Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms
	Articles in Press, Accepted Manuscript , Available Online from 07 March 2018
	Hamid Reza Rohani Raftar; Ali Parvizi
	DOI: 10.22059/jcamech.2018.246800.215
	Show Article

30		Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station
	Articles in Press, Accepted Manuscript , Available Online from 25 April 2018
	Amir Askari; Ali Falavand Jozaei
	DOI: 10.22059/jcamech.2018.254108.244
	Show Article

31		Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method
	Articles in Press, Accepted Manuscript , Available Online from 25 April 2018
	Mohsen Ghasemi; Mohammad Reza Ansari; Mohamad Hasan Rahimian
	DOI: 10.22059/jcamech.2018.248898.224
	Show Article

32		Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial
	Articles in Press, Accepted Manuscript , Available Online from 28 April 2018
	Aminreza Noghrehabadi; Alireza Daneh Dezfuli; Farokh Alipour
	DOI: 10.22059/jcamech.2018.250600.235
	Show Article

33		Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production
	Articles in Press, Accepted Manuscript , Available Online from 06 May 2018
	Ebrahim Hajidavalloo; Ali Falavand Jozaei; Aziz Azimi; Younes Shekari; Saeed Ghobadpouri
	DOI: 10.22059/jcamech.2018.255751.261
	Show Article

34		Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy
	Articles in Press, Accepted Manuscript , Available Online from 07 May 2018
	Manasseh Olusegun Oyekeye; Joseph Sehinde Ajiboye; Samson Oluropo Adeosun
	DOI: 10.22059/jcamech.2018.255756.262
	Show Article

35		On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel
	Articles in Press, Accepted Manuscript , Available Online from 17 May 2018
	Joseph Olofinkua
	DOI: 10.22059/jcamech.2018.255680.264
	Show Article

Journal of Computational Applied Mechanics (JCAMECH) - Articles in Press

Research Paper

Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests

Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network

Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer

Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions

Dynamics of Nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory

Numerical and Neural Network Modeling and control of an Aircraft Propeller

Transverse Sensing of Simply Supported Truncated Conical Shells

Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters

Strongly Stable Multi-time Stepping Method with the Option of Controlling Amplitude Decay in Responses

Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method

Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition

Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation

On the thermal conductivity of carbon nanotube/polypropylene nanocomposites by finite element method

Investigation of energy consumption reduction in multistage compression process and its solutions

Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method

Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire

Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology

Finite Element Investigation and comparing different models of wrist prosthesis

Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves

Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model

An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm

Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach

Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling

Numerical simulation of the effect of particle size on the erosion damage in ball valves of pressure reducing station

Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity

Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method

Size-dependent on vibration and flexural sensitivity of atomic force microscope

Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading

Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms

Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station

Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method

Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial

Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production

Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy

On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel