A

  • ACTIN CORTEX Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Adhesively bonded single-lap joint Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Airy stress potential function GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
  • Approximate solution Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
  • ATOMIC FORCE MICROSCOPY Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]

B

  • Ball valve Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
  • Beam Modal Function Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Bending A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Biosensors Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Blood vessel Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Bottom-Hole Pressure (BHP) Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Boussinesq approximation Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
  • Buckling Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Buckling A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]

C

  • Carbon/Epoxy Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Carbon nanostructures Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
  • Carbon nanotube (CNT) A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Carbon nanotubes Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
  • CaSO4 solution Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Casson Fluid A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Cell Biomechanics The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • CELL CYTOSKELETON Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Center of motion Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • CFD Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Chebyshev polynomial Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Chebyshev polynomial Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Circular Cylindrical Shell Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Circumferential groove Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Composite Propeller Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Compression Power Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
  • Constrained Groove Pressing Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Crack Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Crack A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Creep Response The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Critical flow velocity Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Cure cycle optimization Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]

D

  • Differential quadrature method A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Different Lay-ups Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]

E

  • Eigenvalue equations Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Eigenvalue equations Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Elasto-plastic analysis Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Energy Efficiency Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • Entransy dissipation Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Environmental impact Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • Euler–Bernoulli beam Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]

F

  • FG Coating Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • FG cylindrical shells Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • FG nanobeam Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model [Volume 50, Issue 1, 2019, Pages 148-156]
  • First Shear Deformation Plate Theory Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Five-equation model A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Flexibility Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • FML Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Forced Vibration Analysis Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Fouling Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Fredholm integro-differential equation Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
  • Free Vibration Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Functionally graded adherend Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Fuzzy-PID Control Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]

G

  • Genetic Algorithm Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Genetic Algorithm Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Geometrical Parameters Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Graphene oxide A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Graphene platelet A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]

H

  • Hamilton’s principle Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
  • Harmonic motion Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Hashin Damage Criteria Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Horizontal Circular Cylinder A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Hyperelastic FGMs Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • Hyperelastic material Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Hyperelastic pressure vessel Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • Hysteresis Modeling Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]

I

  • Immersed Boundary Method Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Inertial microfluidics Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Instability equations Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Instability equations Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Interface capturing A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Interface sharpening A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Intrinsic forces Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Inverse analysis Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Inverse solubility Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Isentropic Efficiency Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]

L

  • Laminated composite beam Vibration suppression analysis for laminated composite beams embedded actuating magnetostrictive layers [Volume 50, Issue 1, 2019, Pages 69-75]
  • Laminated Plate Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Large epoxy model Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Lattice Boltzmann method Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Lattice Boltzmann method Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
  • Lee two-phase model Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
  • Legged motion Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Linear dynamic vibration absorber Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • LS-DYNA Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]

M

  • Magnetohydrodynamic (MHD) A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Malaria Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Match Asymptotic Expansion Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Mellin transform inversion formula GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
  • Mellin transform method GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
  • MEMS Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Microcantilever Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Micropolar Fluid A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Mooney-Rivlin model Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Multi-objective optimization Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Multi-phase flows A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Multiple rising bubbles Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
  • Multi-scale hybrid nanocomposites A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Multistage compressor Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]

N

  • Nanocomposite materials A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Nanocomposites Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
  • Nano-plate A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Nanorods Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Natural convection Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
  • Non-classical elasticity theory A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Nonlinear oscillation Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Nonlocal Elasticity Theory Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Nonlocal thermoelasticity Rotating magneto-thermoelastic rod with finite length due to moving heat sources via Eringen’s nonlocal model [Volume 50, Issue 1, 2019, Pages 118-126]
  • Nonlocal thermos-elasticity Nonlocal thermoelastic semi-infinite medium with variable thermal conductivity due to a laser short-pulse [Volume 50, Issue 1, 2019, Pages 90-98]
  • Numerical solution A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]

O

  • Octopod Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Optimization Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]

P

  • Parametric Design Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • Partial vitreous liquefaction Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Particle Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
  • Particle separation Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Particle sorting Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Peak temperature Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Perturbation theory Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • Pipe conveying fluid Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Poiseuille Flow Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Porosity Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Preconditioning A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Pressure Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Progressive Collapse Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]
  • Protein microtubules Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
  • Pure Aluminum Sheet Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]

R

  • Radiation A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • RANDOM FIBROUS NETWORK Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Representative Volume Element (RVE) Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
  • R-Glass/Epoxy Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Robot control Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Robot gait Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Robotic mechanism Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Robot stability Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]

S

  • S2-Glass/Epoxy Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Semi-analytical method Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Sensitivity Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
  • Sensitivity Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Shell and tube heat exchanger Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
  • Shell and tube heat exchanger Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Single phase flow Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • SMA Actuator Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
  • Sonography Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Stability Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Stall margin Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Stenosis Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • STIFF INCLUSION Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Subcooled flow boiling Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]

T

  • Taxol Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
  • Temperature gradients Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Temperature profile Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Thick plate A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Thick-walled sphere Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Three Stage Centrifugal Compressor Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
  • Tip gap Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Triangular Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
  • Two-fluid model Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Two phase flow Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Two-phase flow Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Two-phase flow Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]

U

  • Ultrasound imaging Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Ultraviolet Effects The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Under-Balanced Drilling (UBD) Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]

V

  • Valve opening Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
  • Variable thickness Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • Variable thickness Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Variational iteration method Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
  • Vibration A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Vibration A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Viscoelastic Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model [Volume 50, Issue 1, 2019, Pages 148-156]
  • Viscoelastic The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Viscoelastic adhesive Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Viscoelastic-Newtonian fluid Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Vitreous Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]

W

  • Window To Wall Ratio (WWR) Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]

Z

  • Zero-Energy Building Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]