Journal of Computational Applied Mechanics

Keyword Index

A

  • A356 alloy Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method [Volume 52, Issue 4, 2021, Pages 717-730]
  • ABAQUS Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
  • ABAQUS Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • Abdominal indentation Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Abutment Impact of additive manufacturing on advances in the design and production of the dental implants [Volume 54, Issue 2, 2023, Pages 323-335]
  • ACTIN CORTEX Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Adaptive Neuro-Fuzzy Interface System (ANFIS) A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Additive Manufacturing A Nonlinear Error Compensator for FDM 3D Printed Part Dimensions Using a Hybrid Algorithm Based on GMDH Neural Network [Volume 52, Issue 3, 2021, Pages 451-477]
  • Additive Manufacturing Impact of additive manufacturing on advances in the design and production of the dental implants [Volume 54, Issue 2, 2023, Pages 323-335]
  • Adhesive Joint Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
  • Adhesively bonded single-lap joint Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Aerodynamic flight load Design and simulation Sandwich Composite Fairing Shells Using FEM Analyzing [Volume 53, Issue 1, 2022, Pages 55-65]
  • Aerodynamic forces Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
  • Aftertreatment technique Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
  • Agglomeration A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
  • Air-backed plate Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Aircraft propellers Numerical and Neural Network Modeling and control of an Aircraft Propeller [Volume 49, Issue 1, 2018, Pages 63-69]
  • Airy's stress potential functions ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Airy stress potential function GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
  • Airy stress potential function Elzaki transform method for finding solutions to two-dimensional elasticity problems in polar coordinates formulated using Airy stress functions [Volume 51, Issue 2, 2020, Pages 302-310]
  • Airy stress potential function Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Akbari-Ganji method,, Akbari-Ganji Homotopy Perturbation Method for Analyzing the Pulsatile Blood Flow in Tapered Stenosis Arteries under the Effect of Magnetic Field together with the Impact of Mass and Heat Transfer [Volume 53, Issue 4, 2022, Pages 543-570]
  • Aluminium alloy Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Analysis Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
  • Analysis of Variance Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • Analysis of variance (ANOVA) An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
  • Analytical elasticity solution Analytical Elasticity Solution for Accurate Prediction of Stresses in a Rectangular Plate Bending Analysis Using Exact 3-D Theory [Volume 54, Issue 2, 2023, Pages 167-185]
  • Analytical formulation A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [Volume 52, Issue 3, 2021, Pages 408-422]
  • Analytical solutions Modeling and Simulations of Multi-dimensional Thermal Behaviours of Plates during Friction Stir Additive Manufacturing [Volume 53, Issue 3, 2022, Pages 363-378]
  • Angle Beam Transducer Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
  • Angular Velocity Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
  • Anisotropic porous medium,, Effect of Electric field Modulation on the Onset of Electroconvection in a Dielectric Fluid Anisotropic Porous Layer [Volume 53, Issue 4, 2022, Pages 510-523]
  • Anisotropy Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Ankle Biomechanical differences between individuals with chronic ankle instability, copers and healthy controls in the countermovement jump on the force plate [Volume 53, Issue 3, 2022, Pages 356-362]
  • Ankle sprain Use a biomechanical experimental setup to analysis the reliability of force plate postural control parameters in chronic ankle instability patients, copers and healthy control [Volume 53, Issue 2, 2022, Pages 183-189]
  • Annular flow Numerical Details of Convective Heat Transfer by Micro-Encapsulated PCM Case Study: Annular Slurry Flow [Volume 53, Issue 1, 2022, Pages 66-82]
  • Annulus Performance Study of Partially Heated Annulus Filled with Two-Phase Nanofluid: Energy Perspective [Volume 55, Issue 1, 2024, Pages 39-50]
  • ANSWER SCRIPT A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
  • ANSYS-FLUENT Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • Approximate solution Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
  • Artificial Neural Network Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Artificial Neural Network Parametric Analysis for Torque Prediction in Friction Stir Welding Using Machine Learning and Shapley Additive Explanations [Volume 55, Issue 1, 2024, Pages 113-124]
  • Aspect ratio A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
  • Asymmetrical wire rolling Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
  • Asymptotical Stability From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • ATES محیط متخلخل عوامل مؤثر بر استفاده از منابع آب زیرزمینی به عنوان مخزن ذخیره انرژی [Volume 44, Issue 1, 2011, Pages 61-70]
  • Atmospheric boundary layer Numerical Simulation of Atmospheric Boundary Layer Over Laboratory Scale Two-Dimensional Hill Using Pressure-Driven Boundary Condition [Volume 53, Issue 3, 2022, Pages 379-392]
  • ATOMIC FORCE MICROSCOPY Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Atomistic modelling Effect of Different Kernel Normalization Procedures on Vibration Behaviour of Calibrated Nonlocal Integral Continuum Model of Nanobeams [Volume 53, Issue 4, 2022, Pages 639-656]
  • Attached mass-spring system Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Attenuation Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
  • A unified beam theory On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
  • Autofrettage Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • Autonomous Robots Routing and avoiding collisions of autonomous robots in unknown environments with fixed and moving obstacles [Volume 53, Issue 2, 2022, Pages 169-182]
  • Auxetic structure Analytical modeling and parametric study of equivalent stiffness for auxetic structures [Volume 54, Issue 3, 2023, Pages 336-346]
  • Auxetic structures Influence of Booster’s Geometry and Circuit’s Resistor on Performance of the Auxetic Energy Harvester - Experimentally Validated Analysis [Volume 54, Issue 4, 2023, Pages 467-481]
  • Auxetic viscoelastic Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
  • Avoiding Obstacles Routing and avoiding collisions of autonomous robots in unknown environments with fixed and moving obstacles [Volume 53, Issue 2, 2022, Pages 169-182]
  • Axially functionally graded beam Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Axially Functionally Graded Beams Geometrically nonlinear analysis of axially functionally graded beams by using finite element method [Volume 51, Issue 2, 2020, Pages 411-416]
  • Axially functionally graded materials,, An innovative formulation for buckling analysis of nano-tapered Timoshenko beams with axially varying materials [Volume 54, Issue 1, 2023, Pages 87-110]
  • Axially graded material A Ritz Formulation for Vibration Analysis of Axially Functionally Graded Timoshenko-Ehrenfest Beams [Volume 53, Issue 1, 2022, Pages 102-115]
  • Axial Vibration Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Axisymmetric elasticity problem CLOSED FORM SOLUTIONS OF THE NAVIER'S EQUATIONS FOR AXISYMMETRIC ELASTICITY PROBLEMS OF THE ELASTIC HALF-SPACE [Volume 52, Issue 4, 2021, Pages 588-618]

B

  • Backstepping A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
  • Balancing Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
  • Ball mill Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
  • Ball valve Numerical simulation of the effect of particle size on the erosion damage in ball valves of pressure reducing station [Volume 52, Issue 1, 2021, Pages 1-11]
  • Ball valve Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
  • Basic Displacement Functions (BDFs) Analysis of Euler-Bernoulli nanobeams: A mechanical-based solution [Volume 47, Issue 2, 2016, Pages 159-180]
  • Beam Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
  • Beam Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
  • Beam Modal Function Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Bearing fault detection A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
  • Behavior-Based Control Implementation of Behavior-Based Navigation Algorithm on Four-Wheel Steering Mobile Robot [Volume 52, Issue 4, 2021, Pages 619-641]
  • Beltrami – Michell stress compatibility equation Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Beltrami-Michell stress compatibilty equations ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Bending A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Bending A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
  • Bending analysis A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
  • Bending moment Exact Analytical Solutions to Bending Problems of SFrSFr Thin Plates Using Variational Kantorovich-Vlasov Method [Volume 54, Issue 2, 2023, Pages 186-203]
  • Bennett Methodology Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • Bentonite Numerical Simulation of Laminar Flow of a Non-Newtonian Bentonite Solution in a Horizontal Pipe [(Articles in Press)]
  • Bernoulli-Euler Pull-in behaviour of a micro switch actuated by the electrostatic under a uniform longitudinal magnetic field based on nonlocal couple stress theory [Volume 54, Issue 4, 2023, Pages 577-587]
  • BESO Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
  • Bi-dimensional Bi-Directional Thermo-Elastic Analysis of Pressurized Thick Cylindrical Shell with Nonlinear Variable Thickness [Volume 55, Issue 1, 2024, Pages 125-143]
  • Bi directional functionally graded materials Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
  • Bi-directional functionally graded materials (BDFGMs) Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
  • Bidirectional Functionally graded plates Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • Bi-directional temperature fields Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
  • Biharmonic equation Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Biharmonic function First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
  • Biological analytes Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
  • Biological analytes A Review of Paper-Based Substrates as Surface-Enhanced Raman Spectroscopy (SERS) Biosensors and Microfluidic Paper-Based SERS Platforms [Volume 53, Issue 1, 2022, Pages 142-156]
  • Biological applications On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
  • Biological nanosensor A Review of Paper-Based Substrates as Surface-Enhanced Raman Spectroscopy (SERS) Biosensors and Microfluidic Paper-Based SERS Platforms [Volume 53, Issue 1, 2022, Pages 142-156]
  • Biological Nano-Sensor Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
  • Biosensors Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Biot Functionally graded saturated porous structures: A review [Volume 53, Issue 2, 2022, Pages 297-308]
  • Bio-thermoelasticity Analysis of the Bio-Thermoelasticity Response of Biological Tissues Subjected to Harmonic Heating Using a Refined Green–Lindsay Model [Volume 54, Issue 4, 2023, Pages 588-606]
  • Blood Flow Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
  • Blood vessel Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Bone The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
  • Boron Nitride Nanotube Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Bottom-Hole Pressure Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Bottom-Hole Pressure (BHP) Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Bottom-Hole Pressure (BHP) Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • BOUC-WEN MODEL Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
  • Boundary conditions Numerical Simulation of Atmospheric Boundary Layer Over Laboratory Scale Two-Dimensional Hill Using Pressure-Driven Boundary Condition [Volume 53, Issue 3, 2022, Pages 379-392]
  • Boundary conditions Efficient Kinematic model for Stability Analysis of Imperfect Functionally Graded Sandwich Plates with Ceramic middle layer and Varied Boundary Edges [Volume 55, Issue 2, 2024, Pages 184-200]
  • Boussinesq approximation Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
  • Box-Behnken design Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • Brain tumor Preparation of cationized albumin nanoparticles loaded indirubin by high pressure hemogenizer. [Volume 52, Issue 3, 2021, Pages 498-506]
  • B-REP A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
  • Brownian motion Numerical study of Casson nanofluid over an elongated surface in presence of Joule heating and viscous dissipation: Buongiorno model analysis [Volume 53, Issue 3, 2022, Pages 414-430]
  • Brownian motion Effects of Joule heating and viscous dissipation on Casson nanofluid flow over a stretched sheet with chemical reaction [Volume 53, Issue 4, 2022, Pages 478-493]
  • BUCKLED PLATE A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • Buckling Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
  • Buckling Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Buckling A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Buckling Assessment of Radial basis function based meshfree method for the buckling analysis of rectangular FGM plate using HSDT and Strong form formulation [Volume 53, Issue 3, 2022, Pages 332-347]
  • Buckling Stability Analysis of a Laminated Composite Micro Scaled Beam Embedded in Elastic Medium using Modified Coupled Stress Theory [Volume 55, Issue 1, 2024, Pages 26-38]
  • Buckling analyses Analyzing the Buckling Behavior of In-plane Bidirectional Functionally Graded Porous Plates [(Articles in Press)]
  • Buckling analysis Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Buckling analysis A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
  • Buckling analysis Buckling analysis of three-dimensional functionally graded Euler-Bernoulli nanobeams based on the nonlocal strain gradient theory [Volume 53, Issue 1, 2022, Pages 24-40]
  • Buckling analysis Efficient Kinematic model for Stability Analysis of Imperfect Functionally Graded Sandwich Plates with Ceramic middle layer and Varied Boundary Edges [Volume 55, Issue 2, 2024, Pages 184-200]
  • Buckling and nonlinear Post-buckling analysis Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
  • Buckling Behaviour Buckling analysis of 2D functionally graded porous beams using novel higher order theory [Volume 53, Issue 3, 2022, Pages 393-413]

C

  • Calculation method A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
  • Calculus of variations Variational principle for the Kaup-Newell system [Volume 54, Issue 3, 2023, Pages 405-409]
  • Calibration process Effect of Different Kernel Normalization Procedures on Vibration Behaviour of Calibrated Nonlocal Integral Continuum Model of Nanobeams [Volume 53, Issue 4, 2022, Pages 639-656]
  • Carbon/Epoxy Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Carbon nanostructures Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
  • Carbon Nanotube Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Carbon Nanotube Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
  • Carbon nanotube (CNT) A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Carbon nanotube (CNT) A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
  • Carbon nanotube reinforced composite Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading [Volume 53, Issue 1, 2022, Pages 1-23]
  • Carbon nanotubes Longitudinal Magnetic Field Effect on Torsional Vibration of Carbon Nanotubes [Volume 49, Issue 2, 2018, Pages 304-313]
  • Carbon nanotubes Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
  • Carbon Nano Tubes (CNTs) Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
  • Carreau Hybrid Nanofluid Numerical Investigation of MHD Carreau Hybrid Nanofluid Flow over a Stretching Sheet in a Porous Medium with Viscosity Variations and Heat Transport [Volume 54, Issue 3, 2023, Pages 410-424]
  • Carrier density Behavior of functionally graded semiconducting rod with internal heat source under a thermal shock [Volume 55, Issue 1, 2024, Pages 51-61]
  • Car Seat Frame The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • Cartesian Coordinates Flexibility Matrix and Stiffness Matrix of 3D Curved Beam with Varying Curvature and Varying Cross-Sectional Area using Finite Displacement Transfer Method [Volume 54, Issue 4, 2023, Pages 552-576]
  • Casimir force Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
  • CaSO4 solution Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Casson Fluid A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Casson Fluid Numerical study of Casson nanofluid over an elongated surface in presence of Joule heating and viscous dissipation: Buongiorno model analysis [Volume 53, Issue 3, 2022, Pages 414-430]
  • Casson Fluid Effects of Joule heating and viscous dissipation on Casson nanofluid flow over a stretched sheet with chemical reaction [Volume 53, Issue 4, 2022, Pages 478-493]
  • Casson Fluid The onset of Casson fluid convection in a permeable medium layer produced by purely inner heating with magnetic field [(Articles in Press)]
  • Casting Speed Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Cathodic Protection System The Application of Genetic Algorithm to the Optimization of the Maintenance Schedule at a Certain Level of availability and reliability: Case study Cathodic Protection System of Gas Distribution Steel Network [Volume 54, Issue 3, 2023, Pages 455-466]
  • Cationated Human Serum Albumin Preparation of cationized albumin nanoparticles loaded indirubin by high pressure hemogenizer. [Volume 52, Issue 3, 2021, Pages 498-506]
  • Cavitation Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
  • Cell Biomechanics The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • CELL CYTOSKELETON Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Cell isolation A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
  • Cell Mechanics A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
  • Center of motion Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Central composite design Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • Central opening Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
  • Centrifugal Pump Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • Centrifugal pump curves Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Centrifugal pump design Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • CFD Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • CFD Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • CFD Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • CFD A Validation Methodology for Urea Spray on Selective Catalytic Reduction Systems [Volume 53, Issue 2, 2022, Pages 157-168]
  • CFD Simulation Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
  • CFD Simulation Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • CFD Simulation Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology [Volume 54, Issue 4, 2023, Pages 533-551]
  • Characteristics of nanoliposomes Physical and chemical properties of nano-liposome, application in nano medicine [Volume 52, Issue 4, 2021, Pages 751-767]
  • Chebyshev polynomial Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Chebyshev polynomial Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Chemical reaction Effects of Joule heating and viscous dissipation on Casson nanofluid flow over a stretched sheet with chemical reaction [Volume 53, Issue 4, 2022, Pages 478-493]
  • Chemical reaction Radiation effect on the flow of Magneto Hydrodynamic nanofluids over a stretching surface with Chemical reaction [Volume 53, Issue 4, 2022, Pages 494-509]
  • Chemical reaction Therapeutic applications of Darcy-Forchheimer hybrid nanofluid flow and mass transfer over a stretching sheet [Volume 53, Issue 4, 2022, Pages 585-598]
  • Chemicals Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
  • Chemicals A Review of Paper-Based Substrates as Surface-Enhanced Raman Spectroscopy (SERS) Biosensors and Microfluidic Paper-Based SERS Platforms [Volume 53, Issue 1, 2022, Pages 142-156]
  • Circular and annular nanoplate Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Circular Cylindrical Shell Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Circular pipe Analytical solution of pulsating flow and forced convection heat transfer in a pipe filled with porous medium [Volume 52, Issue 4, 2021, Pages 570-587]
  • Circumferential groove Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Classical Boussinesq problem CLOSED FORM SOLUTIONS OF THE NAVIER'S EQUATIONS FOR AXISYMMETRIC ELASTICITY PROBLEMS OF THE ELASTIC HALF-SPACE [Volume 52, Issue 4, 2021, Pages 588-618]
  • Closed die forging Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging [Volume 52, Issue 1, 2021, Pages 69-84]
  • Cohesive Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
  • Cold rolling Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Collaborative Optimization (CO) Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
  • Collector, entropy generation Analyses of entropy generation for a solar minichannel flat plate collector system using different types of nanofluids [Volume 52, Issue 4, 2021, Pages 664-681]
  • Collocation Method Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
  • Combination Method Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
  • Commercial airplane Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
  • Common quadratic Lyapunov function A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
  • Complex Fourier Lagrange Elements An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
  • Complex Fourier shape functions An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
  • Compliant mechanism Optimum design of a micro-positioning compliant ‎mechanism based ‎on neural network ‎metamodeling [Volume 54, Issue 2, 2023, Pages 236-253]
  • Composite Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
  • Composite pipes Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
  • Composite plates Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
  • Composite Propeller Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Composite slabs Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Composite slabs A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
  • Composite structures A review on functionally graded porous structures reinforced by graphene platelets [Volume 52, Issue 4, 2021, Pages 731-750]
  • Compressible viscous flow Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
  • Compression Power Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
  • Compressive uniaxial loading Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
  • Computational fluid dynamic (CFD) Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Computational fluid dynamics (CFD) Numerical Study of Droplet Generation Process in a Microfluidic Flow Focusing [Volume 46, Issue 2, 2015, Pages 167-175]
  • Conical shells Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]
  • Consistency model, generalized trapezoidal algorithm A damage model incorporating dynamic plastic yield surface [Volume 47, Issue 1, 2016, Pages 11-24]
  • Constrained Groove Pressing Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Contact forces Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Continuum damage mechanics A damage model incorporating dynamic plastic yield surface [Volume 47, Issue 1, 2016, Pages 11-24]
  • Convection On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
  • Convection Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
  • Convective drying Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
  • Convective motion The onset of Casson fluid convection in a permeable medium layer produced by purely inner heating with magnetic field [(Articles in Press)]
  • Convective-radiative fin Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Conventional lay-ups Comparative study on the lateral stability strength of laminated composite and fiber-metal laminated I-shaped cross-section beams [Volume 53, Issue 2, 2022, Pages 190-203]
  • Cooling tower Effect of Wind on Thermal Performance of Heller Dry Cooling Tower [Volume 45, Issue 1, 2014, Pages 1-8]
  • Cost Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
  • Cost minimization Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
  • Coulomb fission A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
  • Coupled oil pipes Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
  • Cover plate moment connection Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
  • Crack Attractor Based Analysis of Centrally Cracked Plate Subjected to Chaotic Excitation [Volume 51, Issue 1, 2020, Pages 199-212]
  • Crack Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Crack A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Crack Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Cracked nanobeam A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [Volume 52, Issue 3, 2021, Pages 408-422]
  • Crankshaft Mathematical model for dynamic analysis of internal combustion engines [Volume 54, Issue 4, 2023, Pages 607-622]
  • Creep Thermo-elastic creep analysis and life assessment of rotating thick pressurized cylindrical shells using third-order shear deformation theory [Volume 52, Issue 3, 2021, Pages 366-393]
  • Creep mechanism Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method [Volume 52, Issue 4, 2021, Pages 717-730]
  • Creep Response The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Critical buckling load factors On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
  • Critical flow velocity Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Cryo-mill Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
  • CSZ Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Cu complex The influence of hydro alcoholic extract of Satureja mutica zinc Oxide nanoparticle and zinc complex against coagulase gene expression on standard and clinical isolated of methicillin resistant staphylococcus aureus [Volume 53, Issue 1, 2022, Pages 41-54]
  • CUDA Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
  • Cure cycle optimization Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Curved walking From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • Cyclic Loading Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
  • Cyclic void growth modeling Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
  • Cylinders with Varying Thickness An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]

D

  • Damped Model Updating Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Darcy- Forchheimer flow Therapeutic applications of Darcy-Forchheimer hybrid nanofluid flow and mass transfer over a stretching sheet [Volume 53, Issue 4, 2022, Pages 585-598]
  • Darrieus VAWT Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology [Volume 54, Issue 4, 2023, Pages 533-551]
  • Darrieus VAWT cluster Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology [Volume 54, Issue 4, 2023, Pages 533-551]
  • Data-driven control From Data to Stability: A Novel Approach for Controlling Unknown Linear Time-Invariant Systems with Performance Enhancement [(Articles in Press)]
  • Decoupling A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
  • Deep Neural Networks ‎‎(DNN) Optimum design of a micro-positioning compliant ‎mechanism based ‎on neural network ‎metamodeling [Volume 54, Issue 2, 2023, Pages 236-253]
  • Deflection Exact Analytical Solutions to Bending Problems of SFrSFr Thin Plates Using Variational Kantorovich-Vlasov Method [Volume 54, Issue 2, 2023, Pages 186-203]
  • Deflection, vibration and buckling Deflection, buckling and vibration analyses for a sandwich nanocomposite structure with foam core reinforced with GPLs and SMAs based on TSDBT [Volume 55, Issue 2, 2024, Pages 289-321]
  • Deformation Rate Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
  • Delamination defect Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
  • Dent Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
  • Dental implants Impact of additive manufacturing on advances in the design and production of the dental implants [Volume 54, Issue 2, 2023, Pages 323-335]
  • Depth parameter Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Design and implementation Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
  • Design of Experiments Improving Product Quality of Wire Drawing Process Using Design of Experiments [Volume 55, Issue 1, 2024, Pages 8-25]
  • Design of Experiments (DOE) A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Dielectrophoresis Dielectrophoretic effect of nonuniform electric fields on the protoplast cell [Volume 48, Issue 1, 2017, Pages 1-14]
  • Differential equations of equilibrium ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Differential evolution algorithm Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
  • DIFFERENTIAL QUADRATURE ELEMENT METHOD A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • DIFFERENTIAL QUADRATURE ELEMENT METHOD Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Differential quadrature method A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Differential quadrature method Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Differential quadrature method Comparative study on the lateral stability strength of laminated composite and fiber-metal laminated I-shaped cross-section beams [Volume 53, Issue 2, 2022, Pages 190-203]
  • Different Lay-ups Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Dimensionless Frequency Ratio Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • DIRECT ITERATIVE METHOD A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • Disk Cutters Experimental investigation of hard spline milling using a newly developed disk cutter [Volume 53, Issue 1, 2022, Pages 116-125]
  • Dissipation The study of vibrations in the context of porous micropolar media thermoelasticity and the absence of energy dissipation [Volume 54, Issue 3, 2023, Pages 437-454]
  • DLGS Nonlocal DQM for a Nonlinear Buckling Analysis of DLGSs Integrated with Zno Piezoelectric Layers [Volume 45, Issue 1, 2014, Pages 9-22]
  • Dowel Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]
  • DQM Nonlocal DQM for a Nonlinear Buckling Analysis of DLGSs Integrated with Zno Piezoelectric Layers [Volume 45, Issue 1, 2014, Pages 9-22]
  • Draft tube Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
  • Droplet A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
  • Droplet deformation Four different types of a single drop dripping down a hole under gravity by lattice Boltzmann method [Volume 47, Issue 1, 2016, Pages 89-98]
  • Drying Stresses Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
  • Dry Machining Experimental investigation of hard spline milling using a newly developed disk cutter [Volume 53, Issue 1, 2022, Pages 116-125]
  • Duffing Oscillators Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
  • Dynamic analysis Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading [Volume 53, Issue 1, 2022, Pages 1-23]
  • Dynamic Behavior Real Time Finite Element Simulation of Thick and Thin Sandwich Plate with Viscoelastic Core and Embedded SMA Wires [Volume 53, Issue 2, 2022, Pages 219-243]
  • Dynamic compression Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
  • Dynamic Programming Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
  • Dynamic response Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Dynamic response Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
  • Dynamic yield surface A damage model incorporating dynamic plastic yield surface [Volume 47, Issue 1, 2016, Pages 11-24]

E

  • Economic Analysis Numerical and Economic Study of Performance of Centrifugal Pump as Turbine [Volume 48, Issue 2, 2017, Pages 151-160]
  • Efficiency Performance Improvements of a Centrifugal Pump with Different Impellers using Polymer Additive [Volume 48, Issue 2, 2017, Pages 199-206]
  • Efficiency Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
  • E-FGM A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
  • Eigenvalue equations Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Eigenvalue equations Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Elastic Half-Space CLOSED FORM SOLUTIONS OF THE NAVIER'S EQUATIONS FOR AXISYMMETRIC ELASTICITY PROBLEMS OF THE ELASTIC HALF-SPACE [Volume 52, Issue 4, 2021, Pages 588-618]
  • Elastic medium Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
  • Elastic medium Stability Analysis of a Laminated Composite Micro Scaled Beam Embedded in Elastic Medium using Modified Coupled Stress Theory [Volume 55, Issue 1, 2024, Pages 26-38]
  • Elasto- plastic analysis Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • Elasto-plastic analysis Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Electrical circuit Influence of Booster’s Geometry and Circuit’s Resistor on Performance of the Auxetic Energy Harvester - Experimentally Validated Analysis [Volume 54, Issue 4, 2023, Pages 467-481]
  • Electrical Discharge Machining (EDM) An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
  • Electricity distribution network Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
  • Electric vehicles Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
  • Electroosmotic flow Slip effect on the unsteady electroosmotic and pressure-driven flows of two-layer fluids in a rectangular microchannel [Volume 52, Issue 1, 2021, Pages 12-26]
  • ELI-NP Vibration analysis of the Gamma-Ray element in the ELI-NP interaction chamber (IC) [Volume 55, Issue 2, 2024, Pages 275-288]
  • Elliptic cylinders Performance Study of Partially Heated Annulus Filled with Two-Phase Nanofluid: Energy Perspective [Volume 55, Issue 1, 2024, Pages 39-50]
  • Elzaki transform method Elzaki transform method for finding solutions to two-dimensional elasticity problems in polar coordinates formulated using Airy stress functions [Volume 51, Issue 2, 2020, Pages 302-310]
  • EMHD Thermal Radiation and Shape Factor Effects on Electro-magnetohydrodynamic Tri-hybrid Williamson Liquid Flow Around a Cylinder [(Articles in Press)]
  • Energy Energy, exergy and economic analysis of an improved Kalina cycle integrated with a proton exchange membrane fuel cell [Volume 53, Issue 2, 2022, Pages 244-263]
  • Energy Absorption A review on structural response and energy absorption of sandwich structures with 3D printed core [Volume 54, Issue 4, 2023, Pages 623-644]
  • ENERGY ANALYSIS Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
  • ENERGY ANALYSIS Performance Study of Partially Heated Annulus Filled with Two-Phase Nanofluid: Energy Perspective [Volume 55, Issue 1, 2024, Pages 39-50]
  • Energy Efficiency Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • ENGINEERING DRAWING A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
  • ENGINEERING DRAWING A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
  • Enhanced Oil Recovery Review of Enhanced Oil Recovery Decision Making in Complex Carbonate Reservoirs: Fluid Flow and Geomechanics Mechanisms [Volume 52, Issue 2, 2021, Pages 350-365]
  • Entransy dissipation Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Environmental impact Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • Equilibrium Equations Flexibility Matrix and Stiffness Matrix of 3D Curved Beam with Varying Curvature and Varying Cross-Sectional Area using Finite Displacement Transfer Method [Volume 54, Issue 4, 2023, Pages 552-576]
  • Equivalent mass Analytical modeling and parametric study of equivalent stiffness for auxetic structures [Volume 54, Issue 3, 2023, Pages 336-346]
  • Equivalent stiffness Analytical modeling and parametric study of equivalent stiffness for auxetic structures [Volume 54, Issue 3, 2023, Pages 336-346]
  • Error Compensation Model A Nonlinear Error Compensator for FDM 3D Printed Part Dimensions Using a Hybrid Algorithm Based on GMDH Neural Network [Volume 52, Issue 3, 2021, Pages 451-477]
  • ESL theory Unified refined beam theory applied to the Spectral Finite Element Method for analysis of laminated composites. [Volume 52, Issue 1, 2021, Pages 44-60]
  • Euler–Bernoulli beam Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
  • Euler-Bernoulli Beam Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Euler-Bernoulli Beam Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Eulerian-Lagrangian Numerical Details of Convective Heat Transfer by Micro-Encapsulated PCM Case Study: Annular Slurry Flow [Volume 53, Issue 1, 2022, Pages 66-82]
  • Euler-Lagrange differential equation Exact Analytical Solutions to Bending Problems of SFrSFr Thin Plates Using Variational Kantorovich-Vlasov Method [Volume 54, Issue 2, 2023, Pages 186-203]
  • Evaporation Sessile and Pendant Micro-Liter Drops Evaporate at Different Rates: An Experimental Approach [Volume 47, Issue 1, 2016, Pages 109-119]
  • Evaporation Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
  • Evolutionary Optimization Algorithms Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Exact 3-D theory Analytical Elasticity Solution for Accurate Prediction of Stresses in a Rectangular Plate Bending Analysis Using Exact 3-D Theory [Volume 54, Issue 2, 2023, Pages 167-185]
  • Exact static theory Exact analytic solution for static bending of 3-D plate under transverse loading [Volume 53, Issue 3, 2022, Pages 309-331]
  • Exergy Energy, exergy and economic analysis of an improved Kalina cycle integrated with a proton exchange membrane fuel cell [Volume 53, Issue 2, 2022, Pages 244-263]
  • Exergy loss Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
  • Expanding or Contracting walls On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
  • Expanding or Contracting walls, Chebychev Spectral Collocation method Analysis of Flow of Nanofluid through a Porous Channel with Expanding or Contracting Walls using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 225-232]
  • Explicit analytical solutions Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
  • Exponentially Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Extrusion Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]

F

  • FAIR ASSESSMENT A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
  • Fairing Design and simulation Sandwich Composite Fairing Shells Using FEM Analyzing [Volume 53, Issue 1, 2022, Pages 55-65]
  • Falling Velocity Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
  • Fast Kurtogram A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
  • Fatigue parameters Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Fault Detection Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • FEA Thread Pitch Variant in Orthodontic Mini-screws: A 3-D Finite Element Analysis [Volume 46, Issue 2, 2015, Pages 257-265]
  • FEM Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
  • FEM Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • FEM Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • FEM Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading [Volume 53, Issue 1, 2022, Pages 1-23]
  • FEM The influences of various auxetic cores on natural frequencies and forced vibration behavior of sandwich beam fabricated by 3D printer based on third -order shear deformation theory [Volume 54, Issue 2, 2023, Pages 285-308]
  • FEM Mesh Sensitivity Design and simulation Sandwich Composite Fairing Shells Using FEM Analyzing [Volume 53, Issue 1, 2022, Pages 55-65]
  • Femur Bone An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests [Volume 51, Issue 1, 2020, Pages 91-97]
  • FENE-P Fluid Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
  • FE simulation Simultaneous hydroforming of bulge- and T-zone in 304 stainless steel and 70/30 brass tubes [Volume 51, Issue 1, 2020, Pages 213-230]
  • FG Coating Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • FG cylindrical shells Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • FG graded auxetic cell The influences of various auxetic cores on natural frequencies and forced vibration behavior of sandwich beam fabricated by 3D printer based on third -order shear deformation theory [Volume 54, Issue 2, 2023, Pages 285-308]
  • FGM Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • FGM Assessment of Radial basis function based meshfree method for the buckling analysis of rectangular FGM plate using HSDT and Strong form formulation [Volume 53, Issue 3, 2022, Pages 332-347]
  • FGM nanoplate Refined plate theory for free vibration analysis of FG nanoplates using the nonlocal continuum plate model [Volume 48, Issue 1, 2017, Pages 123-136]
  • FG nanobeam Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model [Volume 50, Issue 1, 2019, Pages 148-156]
  • FG Nanoplates Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • FG plate A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
  • FG sandwich beam On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
  • FG sandwich plate Coupled loading hygro-thermo-mechanical Effect on the stability of imperfect functionally graded sandwich plates [(Articles in Press)]
  • Fiber metal laminates Comparative study on the lateral stability strength of laminated composite and fiber-metal laminated I-shaped cross-section beams [Volume 53, Issue 2, 2022, Pages 190-203]
  • Fifth Order Shear Deformation Theory Buckling analysis of 2D functionally graded porous beams using novel higher order theory [Volume 53, Issue 3, 2022, Pages 393-413]
  • Finite Difference Method Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
  • Finite differences scheme A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
  • Finite element A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
  • Finite element An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests [Volume 51, Issue 1, 2020, Pages 91-97]
  • Finite Element Analysis Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
  • Finite Element Analysis (FEA) Optimum design of a micro-positioning compliant ‎mechanism based ‎on neural network ‎metamodeling [Volume 54, Issue 2, 2023, Pages 236-253]
  • Finite Element Method Transient thermo-visco-elastic response of a functionally graded non-axisymmetric cylinder [Volume 46, Issue 2, 2015, Pages 191-204]
  • Finite Element Method Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
  • Finite Element Method Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Finite Element Method On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Finite Element Method Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Finite element model Updating finite element model using frequency domain decomposition method and bees algorithm [Volume 48, Issue 1, 2017, Pages 75-88]
  • Finite Fourier transform Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Fire Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]
  • Fire resistance Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Fire resistance A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
  • First order shear deformation theory Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
  • First-order shear deformation theory (FSDT) Bi-Directional Thermo-Elastic Analysis of Pressurized Thick Cylindrical Shell with Nonlinear Variable Thickness [Volume 55, Issue 1, 2024, Pages 125-143]
  • First-Order Temperature Theory (FTT) An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • First Shear Deformation Plate Theory Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Five-equation model A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Flare Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [Volume 52, Issue 3, 2021, Pages 423-432]
  • Flexibility Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Flexible SERS substrate A Review of Paper-Based Substrates as Surface-Enhanced Raman Spectroscopy (SERS) Biosensors and Microfluidic Paper-Based SERS Platforms [Volume 53, Issue 1, 2022, Pages 142-156]
  • Flexible viscoelastic core Real Time Finite Element Simulation of Thick and Thin Sandwich Plate with Viscoelastic Core and Embedded SMA Wires [Volume 53, Issue 2, 2022, Pages 219-243]
  • FlexPDE Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
  • Flexure Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
  • Flow Patterns Experimental and numerical investigation of flow patterns in symmetrical spurs [Volume 54, Issue 3, 2023, Pages 425-436]
  • Fluid coupling Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Fluid flow Thermal Analysis of a Cylindrical Heat Pipe in a Magnetic Field [Volume 53, Issue 4, 2022, Pages 524-542]
  • Fluid-induced vibration Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
  • Fluid-Structure Interactions A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
  • FML Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Foam Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
  • Foam core Deflection, buckling and vibration analyses for a sandwich nanocomposite structure with foam core reinforced with GPLs and SMAs based on TSDBT [Volume 55, Issue 2, 2024, Pages 289-321]
  • Foot and Ankle Complex,, Sensitivity Analysis of the Finite Element Model of the Foot and Ankle Complex for Vibration Analysis [Volume 54, Issue 1, 2023, Pages 140-149]
  • Forced convection Analytical solution of pulsating flow and forced convection heat transfer in a pipe filled with porous medium [Volume 52, Issue 4, 2021, Pages 570-587]
  • Forced convection,, Numerical Study on Convective Heat Transfer Characteristics of Single and Hybrid Nanofluids Flow Through Rectangular Conduits Under Turbulent Flow with Uniform Heat Flux [Volume 53, Issue 4, 2022, Pages 571-584]
  • Forced vibration Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
  • Forced vibration The influences of various auxetic cores on natural frequencies and forced vibration behavior of sandwich beam fabricated by 3D printer based on third -order shear deformation theory [Volume 54, Issue 2, 2023, Pages 285-308]
  • Forced vibration Symmetrical Mechanical System Properties-Based Forced Vibration Analysis [Volume 54, Issue 4, 2023, Pages 501-514]
  • Forced Vibration Analysis Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Fouling Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Four-bar mechanism Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
  • Fourier series method Fourier series method for finding displacements and stress fields in hyperbolic shear deformable thick beams subjected to distributed transverse loads [Volume 53, Issue 1, 2022, Pages 126-141]
  • Fourier transform Fourier-Homotopy Perturbation Method for Heat and Mass Transfer with 2D Unsteady Squeezing Viscous Flow Problem [Volume 54, Issue 2, 2023, Pages 219-235]
  • Four-Wheel Steering Mobile Robot Implementation of Behavior-Based Navigation Algorithm on Four-Wheel Steering Mobile Robot [Volume 52, Issue 4, 2021, Pages 619-641]
  • Fracture Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
  • Fragility Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Frames Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Fredholm integro-differential equation Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
  • Free Vibration Numerical free vibration analysis of higher-order shear deformable beams resting on two-parameter elastic foundation [Volume 46, Issue 2, 2015, Pages 117-131]
  • Free Vibration Analysis of Euler-Bernoulli nanobeams: A mechanical-based solution [Volume 47, Issue 2, 2016, Pages 159-180]
  • Free Vibration Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Free Vibration Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • Free Vibration Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • Free Vibration Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Free Vibration Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
  • Free Vibration The influences of various auxetic cores on natural frequencies and forced vibration behavior of sandwich beam fabricated by 3D printer based on third -order shear deformation theory [Volume 54, Issue 2, 2023, Pages 285-308]
  • Frictional Stir Manufacturing Modeling and Simulations of Multi-dimensional Thermal Behaviours of Plates during Friction Stir Additive Manufacturing [Volume 53, Issue 3, 2022, Pages 363-378]
  • Friction stir welding Parametric Analysis for Torque Prediction in Friction Stir Welding Using Machine Learning and Shapley Additive Explanations [Volume 55, Issue 1, 2024, Pages 113-124]
  • FSDT Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
  • Functional Graded Cable Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Functional graded nanoplate Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Functionally Graded Behavior of functionally graded semiconducting rod with internal heat source under a thermal shock [Volume 55, Issue 1, 2024, Pages 51-61]
  • Functionally graded adherend Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Functionally Graded Material Transient thermo-visco-elastic response of a functionally graded non-axisymmetric cylinder [Volume 46, Issue 2, 2015, Pages 191-204]
  • Functionally Graded Material Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Functionally Graded Material Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
  • Functionally Graded Material A review on stress-driven nonlocal elasticity theory [Volume 52, Issue 3, 2021, Pages 535-552]
  • Functionally Graded Material Effect of Porosity on the Static Response of Rotating and Non-Rotating Porous Timoshenko Beam [Volume 55, Issue 2, 2024, Pages 209-222]
  • Functionally graded Material (FGM) Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions [Volume 48, Issue 1, 2017, Pages 15-26]
  • Functionally graded Material (FGM) A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
  • Functionally graded Material (FGM) An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • Functionally Graded Materials Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
  • Functionally Graded Materials A review on functionally graded porous structures reinforced by graphene platelets [Volume 52, Issue 4, 2021, Pages 731-750]
  • Functionally Graded Materials Stability analysis of conveying-nanofluid functionally graded nanotube based on nonlocal couple stress theory [Volume 54, Issue 2, 2023, Pages 309-322]
  • Functionally Graded Materials Material Nonlinear Static Analysis of Axially Functionally Graded Porous Bar Elements [Volume 55, Issue 2, 2024, Pages 223-234]
  • Functionally Graded Plates Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
  • Functionally graded porous Functionally graded saturated porous structures: A review [Volume 53, Issue 2, 2022, Pages 297-308]
  • Functionally graded porous beam On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
  • Functionally graded porous beam Elastostatic behaviour of functionally graded porous beams: novel Kuhn Tucker conditions with R program for mathematical computing [Volume 55, Issue 2, 2024, Pages 165-183]
  • Functionally graded porous materials Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates [Volume 54, Issue 3, 2023, Pages 347-364]
  • Functionally graded porous plates A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
  • Fused Deposition Method A Nonlinear Error Compensator for FDM 3D Printed Part Dimensions Using a Hybrid Algorithm Based on GMDH Neural Network [Volume 52, Issue 3, 2021, Pages 451-477]
  • Fuzzy A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
  • Fuzzy logic Fuzzy logic-based variable impedance control for a bilateral teleoperation system under time delay [(Articles in Press)]
  • Fuzzy PID Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
  • Fuzzy-PID Control Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]

G

  • Galerkin Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
  • Galerkin Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
  • Gamma-ray Vibration analysis of the Gamma-Ray element in the ELI-NP interaction chamber (IC) [Volume 55, Issue 2, 2024, Pages 275-288]
  • Gasket-plate heat exchanger Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
  • Generalized differential quadrature method (GDQM) Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
  • Generalized differential quadrature method (GDQM) Buckling analysis of three-dimensional functionally graded Euler-Bernoulli nanobeams based on the nonlocal strain gradient theory [Volume 53, Issue 1, 2022, Pages 24-40]
  • Generalized Integral Transform Method,, Generalized Integral Transform Method for the Bending Analysis of Clamped Rectangular Thin Plates [Volume 53, Issue 4, 2022, Pages 599-625]
  • Generic network topology A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
  • Genetic Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Genetic algorithm An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Genetic Algorithm Numerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming [Volume 45, Issue 1, 2014, Pages 35-45]
  • Genetic Algorithm Fractional Order PID Controller for Diabetes Patients [Volume 46, Issue 1, 2015, Pages 69-76]
  • Genetic Algorithm Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
  • Genetic Algorithm A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
  • Genetic Algorithm Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Genetic Algorithm Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Genetic Algorithm A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
  • Genetic Algorithm The Application of Genetic Algorithm to the Optimization of the Maintenance Schedule at a Certain Level of availability and reliability: Case study Cathodic Protection System of Gas Distribution Steel Network [Volume 54, Issue 3, 2023, Pages 455-466]
  • Genetic Algorithm (GA) An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
  • Geomechanics Review of Enhanced Oil Recovery Decision Making in Complex Carbonate Reservoirs: Fluid Flow and Geomechanics Mechanisms [Volume 52, Issue 2, 2021, Pages 350-365]
  • Geometrically nonlinear Analysis Geometrically nonlinear analysis of axially functionally graded beams by using finite element method [Volume 51, Issue 2, 2020, Pages 411-416]
  • Geometrical Parameters Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Geometrical Parameters Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Global-local theory Real Time Finite Element Simulation of Thick and Thin Sandwich Plate with Viscoelastic Core and Embedded SMA Wires [Volume 53, Issue 2, 2022, Pages 219-243]
  • Globally asymptotically stable A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
  • GMDH Neural Network A Nonlinear Error Compensator for FDM 3D Printed Part Dimensions Using a Hybrid Algorithm Based on GMDH Neural Network [Volume 52, Issue 3, 2021, Pages 451-477]
  • GPL Deflection, buckling and vibration analyses for a sandwich nanocomposite structure with foam core reinforced with GPLs and SMAs based on TSDBT [Volume 55, Issue 2, 2024, Pages 289-321]
  • Graphene oxide A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Graphene platelet A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Graphene platelets A review on functionally graded porous structures reinforced by graphene platelets [Volume 52, Issue 4, 2021, Pages 731-750]

H

  • Haar wavelet collocation method Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Hall Current,, Convective MHD Jeffrey Fluid Flow Due to Vertical Plates with Pulsed Fluid Suction: Numerical study [Volume 54, Issue 1, 2023, Pages 36-48]
  • Halpin–Tsai model Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
  • Hamilton principle Variational principle for Schrödinger-KdV system with the M-fractional derivatives [Volume 55, Issue 2, 2024, Pages 235-241]
  • Hamilton's principle Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
  • Hamilton's principle Vibration of inhomogeneous fibrous laminated plates using an efficient and simple polynomial refined theory [Volume 52, Issue 2, 2021, Pages 233-245]
  • Hamilton’s principle Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
  • Hard Gearing Experimental investigation of hard spline milling using a newly developed disk cutter [Volume 53, Issue 1, 2022, Pages 116-125]
  • HARMONIC BALANCE METHOD A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • Harmonic motion Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Hashin Damage Criteria Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Heat exchanger Optimal Design of Shell-and-Tube Heat Exchanger Based on Particle Swarm Optimization Technique [Volume 46, Issue 1, 2015, Pages 21-29]
  • Heat exchanger Water thickness effect on the fin efficiency and heat transfer for partially wet-surface heat exchanger [Volume 47, Issue 2, 2016, Pages 195-207]
  • Heat Pipe, Temperature Thermal Analysis of a Cylindrical Heat Pipe in a Magnetic Field [Volume 53, Issue 4, 2022, Pages 524-542]
  • Heat Sink Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • Heat transfer Effect of Wind on Thermal Performance of Heller Dry Cooling Tower [Volume 45, Issue 1, 2014, Pages 1-8]
  • Heat transfer Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
  • Heat transfer On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • Heat transfer Thermal Analysis of a Cylindrical Heat Pipe in a Magnetic Field [Volume 53, Issue 4, 2022, Pages 524-542]
  • Heat transfer Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
  • Heat transfer Free Convection from a One End Closed Vertical Pipe with Annular Fins: A Computational Study [(Articles in Press)]
  • Hemodynamic Properties Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
  • Hierarchical Fuzzy Control Routing and avoiding collisions of autonomous robots in unknown environments with fixed and moving obstacles [Volume 53, Issue 2, 2022, Pages 169-182]
  • HIFU Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
  • HIGH EFFICIENCY DEEP GRINDING Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Higher-Order Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
  • Higher-order global-local theory Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
  • Higher order shear and normal deformations plate theory Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates [Volume 54, Issue 3, 2023, Pages 347-364]
  • Higher order shear deformation theory On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
  • High-Order Shear Deformation Theories THE RADIAL POINT INTERPOLATION METHOD IN THE BENDING ANALYSIS OF SYMMETRIC LAMINATES USING HSDTS [Volume 52, Issue 4, 2021, Pages 682-716]
  • Hole-Cleaning Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Hollow cylinder Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
  • Homotopy Perturbation Method Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Homotopy Perturbation Method Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
  • Homotopy Perturbation Method Nonlinear coupled torsional-radial vibration of single-walled carbon nanotubes using numerical methods [Volume 52, Issue 4, 2021, Pages 642-663]
  • Homotopy Perturbation Method Fourier-Homotopy Perturbation Method for Heat and Mass Transfer with 2D Unsteady Squeezing Viscous Flow Problem [Volume 54, Issue 2, 2023, Pages 219-235]
  • Honeycomb sandwich structures Design and simulation Sandwich Composite Fairing Shells Using FEM Analyzing [Volume 53, Issue 1, 2022, Pages 55-65]
  • Horizontal Circular Cylinder A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Hot forming Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging [Volume 52, Issue 1, 2021, Pages 69-84]
  • HSDT Plate Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • Human pluripotent stem cells (PSCs),, Comparative in silico analysis of CHIR99021, Azakenpaullone and Tricantin interactions with GSK3β, a key protein in stem cell fates [(Articles in Press)]
  • Humidity environment, Multi objective optimization, Magnetic field Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
  • Hydraulic turbine Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
  • Hydromechanical Deep Drawing An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Hydrophobic to Superhydrophobic Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
  • Hydrostatic pressure Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
  • Hyperbolic shear deformation beam theory Fourier series method for finding displacements and stress fields in hyperbolic shear deformable thick beams subjected to distributed transverse loads [Volume 53, Issue 1, 2022, Pages 126-141]
  • Hyperelastic Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]
  • Hyperelastic FGMs Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • Hyperelastic material Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Hyperelastic Membrane Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Hyperelastic pressure vessel Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • HYSTERESIS BEHAVIOR Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
  • Hysteresis Modeling Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]

I

  • IC engines Mathematical model for dynamic analysis of internal combustion engines [Volume 54, Issue 4, 2023, Pages 607-622]
  • Illyushin' s method Bending Response of a Rotating Viscoelastic Functionally Graded Porous Disk with Variable Thickness [Volume 54, Issue 4, 2023, Pages 482-500]
  • Immersed Boundary Method Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Immersed Interface Method Dielectrophoretic effect of nonuniform electric fields on the protoplast cell [Volume 48, Issue 1, 2017, Pages 1-14]
  • Impression creep Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method [Volume 52, Issue 4, 2021, Pages 717-730]
  • Inconel 718 super alloy An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
  • Incremental explosive analysis (IEA) Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Indirubin, Glioblastoma Preparation of cationized albumin nanoparticles loaded indirubin by high pressure hemogenizer. [Volume 52, Issue 3, 2021, Pages 498-506]
  • Inertial microfluidics Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Inertial terms A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
  • Initial geometric imperfection Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Inplane bidirectional FGP’ s Analyzing the Buckling Behavior of In-plane Bidirectional Functionally Graded Porous Plates [(Articles in Press)]
  • Inspection Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
  • Instability equations Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Instability equations Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Instable fluid velocity Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
  • Intensity parameter Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Interaction Chamber Vibration analysis of the Gamma-Ray element in the ELI-NP interaction chamber (IC) [Volume 55, Issue 2, 2024, Pages 275-288]
  • Interface capturing A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Interface sharpening A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Internal Forces Flexibility Matrix and Stiffness Matrix of 3D Curved Beam with Varying Curvature and Varying Cross-Sectional Area using Finite Displacement Transfer Method [Volume 54, Issue 4, 2023, Pages 552-576]
  • Internal heat generation Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Internal Rayleigh number The onset of Casson fluid convection in a permeable medium layer produced by purely inner heating with magnetic field [(Articles in Press)]
  • Internal stability A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
  • Intrinsic forces Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Inverse analysis Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Inverse problem A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
  • Inverse solubility Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Inverted Pendulum Model (IPM) Energy Dissipation Rate Control Via a Semi-Analytical Pattern Generation Approach for Planar Three-Legged Galloping Robot based on the Property of Passive Dynamic Walking [Volume 46, Issue 1, 2015, Pages 31-39]
  • IPMC A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
  • IQ method Large Amplitude Vibration Analysis of Graphene Sheets as Resonant Mass Sensors Using Mixed Pseudo-Spectral and Integral Quadrature Methods [Volume 45, Issue 1, 2014, Pages 61-75]
  • Iran Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
  • Irreversibility Analyses of entropy generation for a solar minichannel flat plate collector system using different types of nanofluids [Volume 52, Issue 4, 2021, Pages 664-681]
  • Isentropic Efficiency Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]

K

  • Kalina cycle Energy, exergy and economic analysis of an improved Kalina cycle integrated with a proton exchange membrane fuel cell [Volume 53, Issue 2, 2022, Pages 244-263]
  • Karaj dam lake Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
  • Kernel function normalization Effect of Different Kernel Normalization Procedures on Vibration Behaviour of Calibrated Nonlocal Integral Continuum Model of Nanobeams [Volume 53, Issue 4, 2022, Pages 639-656]
  • Key Words: Binary Alloy Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Kinetics of swelling Kinetics of swelling of cylindrical functionally graded temperature-responsive hydrogels [Volume 51, Issue 2, 2020, Pages 464-471]
  • Kirchhoff Plate Theory Exact Analytical Solutions to Bending Problems of SFrSFr Thin Plates Using Variational Kantorovich-Vlasov Method [Volume 54, Issue 2, 2023, Pages 186-203]
  • Kirchhoff theory Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]
  • Knee joint slip Contact mechanics of human knee joint: Analytical approach [Volume 52, Issue 4, 2021, Pages 553-569]
  • Kuhn-Tucker conditions Elastostatic behaviour of functionally graded porous beams: novel Kuhn Tucker conditions with R program for mathematical computing [Volume 55, Issue 2, 2024, Pages 165-183]

L

  • Labyrinth weirs Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • Lagrange Equations Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • Lagrange Equations Analyzing the Buckling Behavior of In-plane Bidirectional Functionally Graded Porous Plates [(Articles in Press)]
  • Lagrange multiplier Variational principle for the Kaup-Newell system [Volume 54, Issue 3, 2023, Pages 405-409]
  • Lagrange’s equations Buckling analysis of 2D functionally graded porous beams using novel higher order theory [Volume 53, Issue 3, 2022, Pages 393-413]
  • Lamb Wave Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
  • Laminated composite beam Vibration suppression analysis for laminated composite beams embedded actuating magnetostrictive layers [Volume 50, Issue 1, 2019, Pages 69-75]
  • Laminated composite beam Forced vibration of a magnetoelastic laminated composite beam on Pasternak’s foundation [Volume 52, Issue 3, 2021, Pages 478-497]
  • Laminated Composites Stability Analysis of a Laminated Composite Micro Scaled Beam Embedded in Elastic Medium using Modified Coupled Stress Theory [Volume 55, Issue 1, 2024, Pages 26-38]
  • Laminated Plate Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Laminated Plates Vibration Behaviour of Shear Deformable Laminated Plates Composed of Non-Homogeneous Layers [Volume 55, Issue 2, 2024, Pages 201-208]
  • Landslides,, Investigating the efficiency of micropiles in the stability of soil slopes; a case study [Volume 54, Issue 1, 2023, Pages 127-139]
  • Laplace transform Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Laplace transform Applications of q-Homotopy analysis with Laplace Transform and Pade´ approximate method for Solving Magneto Hydrodynamic boundary-layer equations. [Volume 54, Issue 2, 2023, Pages 204-218]
  • Laplace transforms A 1D thermoelastic response of skin tissue due to ramp-type heating via a fractional-order Lord–Shulman model [Volume 54, Issue 3, 2023, Pages 365-377]
  • Large epoxy model Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Lateral stability Comparative study on the lateral stability strength of laminated composite and fiber-metal laminated I-shaped cross-section beams [Volume 53, Issue 2, 2022, Pages 190-203]
  • Lattice Boltzmann method Four different types of a single drop dripping down a hole under gravity by lattice Boltzmann method [Volume 47, Issue 1, 2016, Pages 89-98]
  • Lattice Boltzmann method Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • Lattice Boltzmann method Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Lattice Boltzmann method Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
  • Lattice Boltzmann method The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
  • Layered Composites Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
  • Layerwise theory Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • League Championship Algorithm A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
  • Leakage Multilayer Hydrogel Seals: Numerical Study of Elastic Leak [Volume 53, Issue 4, 2022, Pages 626-638]
  • Learning Vector Quantization (LVQ) A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Least squares weighted residual method Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Lee two-phase model Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
  • Legendre orthonormal polynomials Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates [Volume 54, Issue 3, 2023, Pages 347-364]
  • Legendre polynomial First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
  • Legendre wavelet Collocation method Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
  • Legendre wavelet Collocation method Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Legged motion Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Legged robots Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Levenberg-Marquardt Numerical and Neural Network Modeling and control of an Aircraft Propeller [Volume 49, Issue 1, 2018, Pages 63-69]
  • Lid-driven MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
  • Life assessment Thermo-elastic creep analysis and life assessment of rotating thick pressurized cylindrical shells using third-order shear deformation theory [Volume 52, Issue 3, 2021, Pages 366-393]
  • Linear dynamic vibration absorber Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Linear Elastic Fracture mechanics A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
  • Liquid height Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Liquid Properties Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Liver cancer Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
  • Load level Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Load transferred to the bone The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
  • Longitudinal fin Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Longitudinal rectangular fin Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
  • Lord and Shulman A thermo-elastic model with a single relaxation time of an unbounded medium heated by a heat supply and moving vertically [Volume 53, Issue 3, 2022, Pages 431-443]
  • Lord– Shulman theory Analysis of the Bio-Thermoelasticity Response of Biological Tissues Subjected to Harmonic Heating Using a Refined Green–Lindsay Model [Volume 54, Issue 4, 2023, Pages 588-606]
  • Low cycle fatigue Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
  • Low Velocity Impact,, Investigation of the effect of impactor shape on the behavior of composite sandwich plates with aluminum foam core at low-speed impact: Experimental and physical study [Volume 54, Issue 1, 2023, Pages 150-166]
  • LS-DYNA Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]

M

  • Mach number Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • MAC Method Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
  • Macro-Segregation Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Magnetic bar Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Magnetic effect MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
  • Magnetic Fluids Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
  • Magnetic nanoparticles, Magnetic field, Mechanical actuation, Chondrogenesis Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
  • Magnetic Particles Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
  • Magnetizable Fluid Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
  • Magnetohydrodynamic Thermal Analysis of a Cylindrical Heat Pipe in a Magnetic Field [Volume 53, Issue 4, 2022, Pages 524-542]
  • Magnetohydrodynamic (MHD) A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Magnetohydrodynamics Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
  • Magnetohydrodynamics MHD Exploring Three-Dimensional MHD Maxwell Hybrid Nanofluid Flow: A Computational Study on a Stretching sheet [Volume 55, Issue 1, 2024, Pages 77-91]
  • Malaria Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Mass Transfer Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
  • Match Asymptotic Expansion Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Material Identification The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • Material Nonlinearity Material Nonlinear Static Analysis of Axially Functionally Graded Porous Bar Elements [Volume 55, Issue 2, 2024, Pages 223-234]
  • Mathematical model Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
  • Mathematical Modeling Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Mathematical solution Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
  • Maximum Reduction in Sheet Thickness An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Maxwell fluid Exploring Three-Dimensional MHD Maxwell Hybrid Nanofluid Flow: A Computational Study on a Stretching sheet [Volume 55, Issue 1, 2024, Pages 77-91]
  • Maxwell stress functions ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Maxwell stress tensor Dielectrophoretic effect of nonuniform electric fields on the protoplast cell [Volume 48, Issue 1, 2017, Pages 1-14]
  • Mechanical analyses A review on functionally graded porous structures reinforced by graphene platelets [Volume 52, Issue 4, 2021, Pages 731-750]
  • Mechanical analyses Functionally graded saturated porous structures: A review [Volume 53, Issue 2, 2022, Pages 297-308]
  • Mechanical Behavior Investigating the Influence of Material Composition on Bending Analysis of Functionally Graded Beams Using a 2D Refined Theory [Volume 55, Issue 1, 2024, Pages 62-76]
  • Mechanical properties Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
  • Mechanical Properties Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
  • Mechanical Property Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Mechanical Vibration The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • Mechanical Vibrations Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Mechanosensation A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
  • Mechanotransduction Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
  • Mellin transform inversion formula GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
  • Mellin transform method GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
  • Melting process Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
  • Memory Dependent Derivative Study of a Half-Space Via a Generalized Dual Phase-lag Model with Variable Thermal Material Properties and Memory-Dependent Derivative [Volume 53, Issue 2, 2022, Pages 264-281]
  • MEMS Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
  • MEMS Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • MEMS Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
  • Mesh Density A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
  • Meshfree Assessment of Radial basis function based meshfree method for the buckling analysis of rectangular FGM plate using HSDT and Strong form formulation [Volume 53, Issue 3, 2022, Pages 332-347]
  • Meshless method THE RADIAL POINT INTERPOLATION METHOD IN THE BENDING ANALYSIS OF SYMMETRIC LAMINATES USING HSDTS [Volume 52, Issue 4, 2021, Pages 682-716]
  • Metaconcrete Dynamic behaviour of concrete containing aggregate resonant frequency [Volume 49, Issue 2, 2018, Pages 380-385]
  • Metal Nanoparticles Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
  • Metamodel Optimum design of a micro-positioning compliant ‎mechanism based ‎on neural network ‎metamodeling [Volume 54, Issue 2, 2023, Pages 236-253]
  • Method of Cells (MOC) Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
  • MHD Effects of Joule heating and viscous dissipation on Casson nanofluid flow over a stretched sheet with chemical reaction [Volume 53, Issue 4, 2022, Pages 478-493]
  • MHD Applications of q-Homotopy analysis with Laplace Transform and Pade´ approximate method for Solving Magneto Hydrodynamic boundary-layer equations. [Volume 54, Issue 2, 2023, Pages 204-218]
  • MHD Numerical Investigation of MHD Carreau Hybrid Nanofluid Flow over a Stretching Sheet in a Porous Medium with Viscosity Variations and Heat Transport [Volume 54, Issue 3, 2023, Pages 410-424]
  • MHD flow Unsteady Magneto Hydro Dynamic Flow of a Second Order Fluid over an Oscillating Sheet with a Second Order Slip Flow Model [Volume 47, Issue 2, 2016, Pages 209-218]
  • Microbeams Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
  • Microcantilever Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Microcapsule Numerical Details of Convective Heat Transfer by Micro-Encapsulated PCM Case Study: Annular Slurry Flow [Volume 53, Issue 1, 2022, Pages 66-82]
  • Microchannel Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • Microchannels A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
  • Microfluidics A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
  • Micromechanical Analysis Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
  • Micropolar fibre-reinforced Plane waves in a micropolar fibre-reinforced solid and liquid interface for non-insulated boundary under magneto-thermo-elasticity [Volume 53, Issue 2, 2022, Pages 204-218]
  • Micropolar Fluid A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Micro Scaled Beam Stability Analysis of a Laminated Composite Micro Scaled Beam Embedded in Elastic Medium using Modified Coupled Stress Theory [Volume 55, Issue 1, 2024, Pages 26-38]
  • Microstructure Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Microstructure Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
  • Microstructure Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method [Volume 52, Issue 4, 2021, Pages 717-730]
  • Microtube Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
  • Mindlin plate theory Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
  • Minimum effort Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Mixed Convection MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
  • Modal Analysis The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • Modified Coupled Stress Theory Stability Analysis of a Laminated Composite Micro Scaled Beam Embedded in Elastic Medium using Modified Coupled Stress Theory [Volume 55, Issue 1, 2024, Pages 26-38]
  • Modified couple stress Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
  • Modified couple stress theory Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
  • Modified couple stress theory Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Modified differential transform method Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Modified Multiple Scales Method An analytical solution for nonlinear vibration of floating plate on the fluid by modified multiple scales method [Volume 52, Issue 3, 2021, Pages 433-450]
  • Modified strain gradient theory Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Modulus of elasticity Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
  • Molecular Dynamics Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
  • Molecular dynamics simulation A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [Volume 52, Issue 3, 2021, Pages 408-422]
  • Mono-dispersity Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Mooney-Rivlin model Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Mori-Tanaka approach Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
  • Mori-Tanaka (MT) Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
  • Moving load Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Moving Mass Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • MRSA, CuO The influence of hydro alcoholic extract of Satureja mutica zinc Oxide nanoparticle and zinc complex against coagulase gene expression on standard and clinical isolated of methicillin resistant staphylococcus aureus [Volume 53, Issue 1, 2022, Pages 41-54]
  • Multi-boiling heat transfer Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Multidisciplinary design feasible (MDF) Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
  • Multidisciplinary design optimization (MDO) Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
  • Multi-GPU Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
  • Multilayer Multilayer Hydrogel Seals: Numerical Study of Elastic Leak [Volume 53, Issue 4, 2022, Pages 626-638]
  • Multi-layer method (MLM) Bi-Directional Thermo-Elastic Analysis of Pressurized Thick Cylindrical Shell with Nonlinear Variable Thickness [Volume 55, Issue 1, 2024, Pages 125-143]
  • Multilayer simulation Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
  • Multi-layers method (MLM) Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
  • Multi-objective optimization Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
  • Multi-objective optimization Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Multi-objective optimization Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
  • Multi-phase flows A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Multiple rising bubbles Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
  • Multiple Scales method An analytical solution for nonlinear vibration of floating plate on the fluid by modified multiple scales method [Volume 52, Issue 3, 2021, Pages 433-450]
  • Multiscale composite plate Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
  • Multi-scale hybrid nanocomposites A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Multistage compressor Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • MWCNTs Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]

N

  • Nano beam Buckling analysis of three-dimensional functionally graded Euler-Bernoulli nanobeams based on the nonlocal strain gradient theory [Volume 53, Issue 1, 2022, Pages 24-40]
  • Nanobeams Analysis of Euler-Bernoulli nanobeams: A mechanical-based solution [Volume 47, Issue 2, 2016, Pages 159-180]
  • Nanocomposite materials A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Nanocomposites Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
  • Nanodisk Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
  • Nanofluid On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
  • Nanofluid On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • Nanofluid Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
  • Nanofluid Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
  • Nanofluid Thermal Radiation and Magnetic Fields Effects on Nanofluids flowing through Stretch Sheet [Volume 54, Issue 1, 2023, Pages 111-126]
  • Nanofluid MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
  • Nanofluid, Porous Channel Analysis of Flow of Nanofluid through a Porous Channel with Expanding or Contracting Walls using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 225-232]
  • Nano fluids Radiation effect on the flow of Magneto Hydrodynamic nanofluids over a stretching surface with Chemical reaction [Volume 53, Issue 4, 2022, Pages 494-509]
  • Nanoliposomes Physical and chemical properties of nano-liposome, application in nano medicine [Volume 52, Issue 4, 2021, Pages 751-767]
  • Nanoliposomes applications Physical and chemical properties of nano-liposome, application in nano medicine [Volume 52, Issue 4, 2021, Pages 751-767]
  • Nanoliposomes fabrication methods Physical and chemical properties of nano-liposome, application in nano medicine [Volume 52, Issue 4, 2021, Pages 751-767]
  • Nanomedicine Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Nanoparticle Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
  • Nano-plate A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Nanorods Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Nanosphere Size dependent nano-spherical pressure vessels based on strain gradient theory [Volume 52, Issue 2, 2021, Pages 307-319]
  • Nano-YSZ Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Natural convection Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
  • Natural convection A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
  • Natural convection Free Convection from a One End Closed Vertical Pipe with Annular Fins: A Computational Study [(Articles in Press)]
  • Navier's differential equations of equilibrium CLOSED FORM SOLUTIONS OF THE NAVIER'S EQUATIONS FOR AXISYMMETRIC ELASTICITY PROBLEMS OF THE ELASTIC HALF-SPACE [Volume 52, Issue 4, 2021, Pages 588-618]
  • Navier’s method Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
  • Navier’s method On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
  • Navier solution A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
  • Navier' s solution Investigating the Influence of Material Composition on Bending Analysis of Functionally Graded Beams Using a 2D Refined Theory [Volume 55, Issue 1, 2024, Pages 62-76]
  • Navier-Stokes Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
  • Navier–Stokes equations Numerical simulation of the mixing layer problem based on a new two-fluid turbulence model [Volume 53, Issue 2, 2022, Pages 282-296]
  • Navigation Routing and avoiding collisions of autonomous robots in unknown environments with fixed and moving obstacles [Volume 53, Issue 2, 2022, Pages 169-182]
  • Navigation Algorithm Implementation of Behavior-Based Navigation Algorithm on Four-Wheel Steering Mobile Robot [Volume 52, Issue 4, 2021, Pages 619-641]
  • NEMS Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
  • NET ZERO ENERGY BUILDINGS (NZEB) Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
  • Neural Network Numerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming [Volume 45, Issue 1, 2014, Pages 35-45]
  • Neural Network An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Neutral Hole Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Newtonian fluids Slip effect on the unsteady electroosmotic and pressure-driven flows of two-layer fluids in a rectangular microchannel [Volume 52, Issue 1, 2021, Pages 12-26]
  • Non-classical elasticity theory A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Non-equilibrium model Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
  • Non-homogeneity Vibration Behaviour of Shear Deformable Laminated Plates Composed of Non-Homogeneous Layers [Volume 55, Issue 2, 2024, Pages 201-208]
  • Non-ideal support Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Nonlinear Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
  • Nonlinear analysis Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Nonlinear Behavior A review on stress distribution, strength and failure of bolted ‎composite joints [Volume 49, Issue 2, 2018, Pages 415-429]
  • Nonlinear free vibration Nonlocal effect on the axisymmetric nonlinear vibrational response of nano-disks using variational iteration method [Volume 52, Issue 3, 2021, Pages 507-534]
  • Nonlinear oscillation Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Nonlinear Solution Material Nonlinear Static Analysis of Axially Functionally Graded Porous Bar Elements [Volume 55, Issue 2, 2024, Pages 223-234]
  • Nonlinear vibration Nonlinear Flow-Induced Flutter Instability of Double CNTs Using Reddy Beam Theory [Volume 46, Issue 1, 2015, Pages 1-12]
  • Nonlinear vibration A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • Nonlinear vibration Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
  • Nonlinear vibration An analytical solution for nonlinear vibration of floating plate on the fluid by modified multiple scales method [Volume 52, Issue 3, 2021, Pages 433-450]
  • Nonlinear viscoelastic Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
  • Nonlocal Elasticity Theory Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Nonlocal Elasticity Theory Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Nonlocal Elasticity Theory Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
  • Nonlocal Elasticity Theory Nonlocal effect on the axisymmetric nonlinear vibrational response of nano-disks using variational iteration method [Volume 52, Issue 3, 2021, Pages 507-534]
  • Nonlocal Elasticity Theory A review on stress-driven nonlocal elasticity theory [Volume 52, Issue 3, 2021, Pages 535-552]
  • Nonlocal integral model Effect of Different Kernel Normalization Procedures on Vibration Behaviour of Calibrated Nonlocal Integral Continuum Model of Nanobeams [Volume 53, Issue 4, 2022, Pages 639-656]
  • Nonlocal Theory Nonlinear Flow-Induced Flutter Instability of Double CNTs Using Reddy Beam Theory [Volume 46, Issue 1, 2015, Pages 1-12]
  • Nonlocal Theory Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • Nonlocal thermoelasticity Rotating magneto-thermoelastic rod with finite length due to moving heat sources via Eringen’s nonlocal model [Volume 50, Issue 1, 2019, Pages 118-126]
  • Nonlocal thermos-elasticity Nonlocal thermoelastic semi-infinite medium with variable thermal conductivity due to a laser short-pulse [Volume 50, Issue 1, 2019, Pages 90-98]
  • Non-Newtonian fluid Numerical Simulation of Laminar Flow of a Non-Newtonian Bentonite Solution in a Horizontal Pipe [(Articles in Press)]
  • Normal Mode Expansion Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
  • Normal stresses Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • No-slip boundary condition The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
  • Numerical Method Multilayer Hydrogel Seals: Numerical Study of Elastic Leak [Volume 53, Issue 4, 2022, Pages 626-638]
  • Numerical model The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
  • Numerical simulation A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
  • Numerical simulation Numerical Simulation of Laminar Flow of a Non-Newtonian Bentonite Solution in a Horizontal Pipe [(Articles in Press)]
  • Numerical Simulations Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Numerical solution A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
  • Numerical solution A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]

O

  • Octopod Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • OpenFOAM Numerical Simulation of Atmospheric Boundary Layer Over Laboratory Scale Two-Dimensional Hill Using Pressure-Driven Boundary Condition [Volume 53, Issue 3, 2022, Pages 379-392]
  • OpenMP Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
  • Optimization An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
  • Optimization Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
  • Optimization Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
  • Optimization Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Optimization Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Optimization Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Optimization Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Optimization Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging [Volume 52, Issue 1, 2021, Pages 69-84]
  • Optimization Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method [Volume 52, Issue 4, 2021, Pages 717-730]
  • Optimum design, Temperature-dependent thermal conductivity Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Orthotropic viscoelastic Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]

P

  • Padé approximants Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Padé approximation Applications of q-Homotopy analysis with Laplace Transform and Pade´ approximate method for Solving Magneto Hydrodynamic boundary-layer equations. [Volume 54, Issue 2, 2023, Pages 204-218]
  • Paper-based SERS substrate A Review of Paper-Based Substrates as Surface-Enhanced Raman Spectroscopy (SERS) Biosensors and Microfluidic Paper-Based SERS Platforms [Volume 53, Issue 1, 2022, Pages 142-156]
  • Parametric Design Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • Parametric resonance Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Parametric Study Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • Parametric Study Parametric Analysis for Torque Prediction in Friction Stir Welding Using Machine Learning and Shapley Additive Explanations [Volume 55, Issue 1, 2024, Pages 113-124]
  • Pareto Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
  • Partial heating Performance Study of Partially Heated Annulus Filled with Two-Phase Nanofluid: Energy Perspective [Volume 55, Issue 1, 2024, Pages 39-50]
  • Partial vitreous liquefaction Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Particle Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
  • Particle diameter Numerical simulation of the effect of particle size on the erosion damage in ball valves of pressure reducing station [Volume 52, Issue 1, 2021, Pages 1-11]
  • Particle separation Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Particle sorting Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Passive Control Method Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
  • Passive walking Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel [Volume 46, Issue 1, 2015, Pages 63-68]
  • Passive walking From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • Pasternak foundation Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
  • PCM Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
  • PCM Numerical Details of Convective Heat Transfer by Micro-Encapsulated PCM Case Study: Annular Slurry Flow [Volume 53, Issue 1, 2022, Pages 66-82]
  • Peak temperature Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • PEM fuel cell Energy, exergy and economic analysis of an improved Kalina cycle integrated with a proton exchange membrane fuel cell [Volume 53, Issue 2, 2022, Pages 244-263]
  • Penman, Montieth and Unsworth method Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
  • Pennes' model Analysis of the Bio-Thermoelasticity Response of Biological Tissues Subjected to Harmonic Heating Using a Refined Green–Lindsay Model [Volume 54, Issue 4, 2023, Pages 588-606]
  • People body vibration Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
  • Periodic boundary condition Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Permeable Stretching Sheet Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
  • Perturbation method Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Perturbation Technique An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • Perturbation Technique Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
  • Perturbation theory Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • P-FGM A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
  • PFRC theory Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
  • Phase lags Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
  • Phase-lags Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
  • Phase-lags Study of a Half-Space Via a Generalized Dual Phase-lag Model with Variable Thermal Material Properties and Memory-Dependent Derivative [Volume 53, Issue 2, 2022, Pages 264-281]
  • Physical model A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
  • Piezoelastic Studying piezoelastic and piezomagnetoelastic configurations for different excitation frequencies in MEMS energy harvesters [Volume 47, Issue 2, 2016, Pages 241-246]
  • Piezoelectric A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
  • Piezoelectric energy harvester Influence of Booster’s Geometry and Circuit’s Resistor on Performance of the Auxetic Energy Harvester - Experimentally Validated Analysis [Volume 54, Issue 4, 2023, Pages 467-481]
  • Piezoelectric Fiber (PZT) Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
  • Piezoelectric nanowire Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
  • Piezo fuzzy fiber (PFF) Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
  • Pipe conveying fluid Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • PIV A Validation Methodology for Urea Spray on Selective Catalytic Reduction Systems [Volume 53, Issue 2, 2022, Pages 157-168]
  • Plated bolted joints A review on stress distribution, strength and failure of bolted ‎composite joints [Volume 49, Issue 2, 2018, Pages 415-429]
  • Plate vibration Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Poiseuille Flow Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Poisson's ratio Analytical modeling and parametric study of equivalent stiffness for auxetic structures [Volume 54, Issue 3, 2023, Pages 336-346]
  • Pollution diffusion Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [Volume 52, Issue 3, 2021, Pages 423-432]
  • Polyacrylamide polymer Performance Improvements of a Centrifugal Pump with Different Impellers using Polymer Additive [Volume 48, Issue 2, 2017, Pages 199-206]
  • Polymer Additives Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
  • Polymeric nano-composite Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
  • Polymer nanocomposites (PNCs) A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
  • Polynomial shape function Analytical Elasticity Solution for Accurate Prediction of Stresses in a Rectangular Plate Bending Analysis Using Exact 3-D Theory [Volume 54, Issue 2, 2023, Pages 167-185]
  • Polypropylene matrix On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Poroelastic beam Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Porosities Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
  • Porosities Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • Porosity Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Porosity Bending Response of a Rotating Viscoelastic Functionally Graded Porous Disk with Variable Thickness [Volume 54, Issue 4, 2023, Pages 482-500]
  • Porosity Efficient Kinematic model for Stability Analysis of Imperfect Functionally Graded Sandwich Plates with Ceramic middle layer and Varied Boundary Edges [Volume 55, Issue 2, 2024, Pages 184-200]
  • Porosity Material Nonlinear Static Analysis of Axially Functionally Graded Porous Bar Elements [Volume 55, Issue 2, 2024, Pages 223-234]
  • Porosity A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
  • Porosity Effect of Porosity on the Static Response of Rotating and Non-Rotating Porous Timoshenko Beam [Volume 55, Issue 2, 2024, Pages 209-222]
  • Porosity Coupled loading hygro-thermo-mechanical Effect on the stability of imperfect functionally graded sandwich plates [(Articles in Press)]
  • Porosity coefficient Analyzing the Buckling Behavior of In-plane Bidirectional Functionally Graded Porous Plates [(Articles in Press)]
  • Porosity distribution A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
  • Porosity effect Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates [Volume 54, Issue 3, 2023, Pages 347-364]
  • Porosity index On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
  • Porosity volume fraction A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
  • Porous A review on functionally graded porous structures reinforced by graphene platelets [Volume 52, Issue 4, 2021, Pages 731-750]
  • Porous channel On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
  • Porous channel On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • Porous Fin Analysis of Heat transfer in Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 271-284]
  • Porous medium Analytical solution of pulsating flow and forced convection heat transfer in a pipe filled with porous medium [Volume 52, Issue 4, 2021, Pages 570-587]
  • Porous medium The onset of Casson fluid convection in a permeable medium layer produced by purely inner heating with magnetic field [(Articles in Press)]
  • Porous medium properties Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
  • Post-buckling Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Postural balance Use a biomechanical experimental setup to analysis the reliability of force plate postural control parameters in chronic ankle instability patients, copers and healthy control [Volume 53, Issue 2, 2022, Pages 183-189]
  • Postural control Biomechanical differences between individuals with chronic ankle instability, copers and healthy controls in the countermovement jump on the force plate [Volume 53, Issue 3, 2022, Pages 356-362]
  • Potential function Variational principle for the Kaup-Newell system [Volume 54, Issue 3, 2023, Pages 405-409]
  • Power generation Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran [Volume 47, Issue 1, 2016, Pages 53-66]
  • Power Plant Effect of Wind on Thermal Performance of Heller Dry Cooling Tower [Volume 45, Issue 1, 2014, Pages 1-8]
  • Power-series Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
  • Power series method of Frobenius Introduction Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Power transmission Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Preconditioning A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Pressure Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Pressure distribution Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Pressure recovery factor Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
  • Pressure vessel Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Preventive maintenance The Application of Genetic Algorithm to the Optimization of the Maintenance Schedule at a Certain Level of availability and reliability: Case study Cathodic Protection System of Gas Distribution Steel Network [Volume 54, Issue 3, 2023, Pages 455-466]
  • Primary Cilium A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
  • Principle of virtual work Investigating the Influence of Material Composition on Bending Analysis of Functionally Graded Beams Using a 2D Refined Theory [Volume 55, Issue 1, 2024, Pages 62-76]
  • Product Design A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Product Uniformity An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Progressive Collapse Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]
  • Propagation matrix Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Propagation matrix A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
  • Property Gradient Materials Investigating the Influence of Material Composition on Bending Analysis of Functionally Graded Beams Using a 2D Refined Theory [Volume 55, Issue 1, 2024, Pages 62-76]
  • Protein microtubules Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
  • Protein Nanoparticles Preparation of cationized albumin nanoparticles loaded indirubin by high pressure hemogenizer. [Volume 52, Issue 3, 2021, Pages 498-506]
  • Pulsating flow Analytical solution of pulsating flow and forced convection heat transfer in a pipe filled with porous medium [Volume 52, Issue 4, 2021, Pages 570-587]
  • Pump as turbine Numerical and Economic Study of Performance of Centrifugal Pump as Turbine [Volume 48, Issue 2, 2017, Pages 151-160]
  • Pure Aluminum Sheet Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • P-Wave Plane waves in a micropolar fibre-reinforced solid and liquid interface for non-insulated boundary under magneto-thermo-elasticity [Volume 53, Issue 2, 2022, Pages 204-218]

Q

  • Quad Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
  • Quasi-3D plate theory Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]

R

  • Radial Point Interpolation Method (RPIM) THE RADIAL POINT INTERPOLATION METHOD IN THE BENDING ANALYSIS OF SYMMETRIC LAMINATES USING HSDTS [Volume 52, Issue 4, 2021, Pages 682-716]
  • Radiation Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
  • Radiation A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Radiation Radiation effect on the flow of Magneto Hydrodynamic nanofluids over a stretching surface with Chemical reaction [Volume 53, Issue 4, 2022, Pages 494-509]
  • Railway wheel Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
  • Raman spectrometry Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
  • RANDOM FIBROUS NETWORK Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • RANS Numerical Simulation of Atmospheric Boundary Layer Over Laboratory Scale Two-Dimensional Hill Using Pressure-Driven Boundary Condition [Volume 53, Issue 3, 2022, Pages 379-392]
  • Rayleigh-Benard Convection Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • Rayleigh limit A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
  • Rayleigh number On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
  • RBF Assessment of Radial basis function based meshfree method for the buckling analysis of rectangular FGM plate using HSDT and Strong form formulation [Volume 53, Issue 3, 2022, Pages 332-347]
  • Rectangular thick nanoplate A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
  • Rectangular thick plate Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Rectangular Waveguide Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
  • Reddy beam Nonlinear Flow-Induced Flutter Instability of Double CNTs Using Reddy Beam Theory [Volume 46, Issue 1, 2015, Pages 1-12]
  • Refined Lord– Shulman theory A 1D thermoelastic response of skin tissue due to ramp-type heating via a fractional-order Lord–Shulman model [Volume 54, Issue 3, 2023, Pages 365-377]
  • Refined TPL theory Analyzing the Thermoelastic Responses of Biological Tissue Exposed to Thermal Shock Utilizing a Three-Phase Lag Theory [Volume 55, Issue 2, 2024, Pages 144-164]
  • Reflection matrix Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Reflection matrix A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
  • Regularized boundary condition The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
  • Regular perturbation method On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • Renewable Energies Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
  • Repairable system The Application of Genetic Algorithm to the Optimization of the Maintenance Schedule at a Certain Level of availability and reliability: Case study Cathodic Protection System of Gas Distribution Steel Network [Volume 54, Issue 3, 2023, Pages 455-466]
  • Representative Volume Element (RVE) Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
  • Residual stress Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • Residual stress Numerical Analysis of explosion effects on the redistribution of residual stresses in the underwater welded pipe [Volume 47, Issue 1, 2016, Pages 121-128]
  • Resonant frequency Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
  • Response surface Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method [Volume 52, Issue 4, 2021, Pages 717-730]
  • Response Surface Optimization The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • R-Glass/Epoxy Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Ring rolling Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • Ring rolling Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Ritz Method Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
  • Ritz Method A Ritz Formulation for Vibration Analysis of Axially Functionally Graded Timoshenko-Ehrenfest Beams [Volume 53, Issue 1, 2022, Pages 102-115]
  • Robot control Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Robot gait Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Robotic device Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Robotic mechanism Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Robot stability Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Rotating beams Effect of Porosity on the Static Response of Rotating and Non-Rotating Porous Timoshenko Beam [Volume 55, Issue 2, 2024, Pages 209-222]
  • Rotating Fluids Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
  • Rotating thick cylinder Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Rotating thick cylindrical shell Thermo-elastic creep analysis and life assessment of rotating thick pressurized cylindrical shells using third-order shear deformation theory [Volume 52, Issue 3, 2021, Pages 366-393]
  • Rotation Matrix Flexibility Matrix and Stiffness Matrix of 3D Curved Beam with Varying Curvature and Varying Cross-Sectional Area using Finite Displacement Transfer Method [Volume 54, Issue 4, 2023, Pages 552-576]
  • Rough surface Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
  • R program Elastostatic behaviour of functionally graded porous beams: novel Kuhn Tucker conditions with R program for mathematical computing [Volume 55, Issue 2, 2024, Pages 165-183]
  • Rule of Mixtures Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
  • Rule of Mixtures Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • Rule of Mixtures A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
  • Rule of Mixtures Analyzing the Buckling Behavior of In-plane Bidirectional Functionally Graded Porous Plates [(Articles in Press)]
  • Runge-Kutta technique Thermal Radiation and Magnetic Fields Effects on Nanofluids flowing through Stretch Sheet [Volume 54, Issue 1, 2023, Pages 111-126]
  • Runner Angle Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]

S

  • S2-Glass/Epoxy Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Sandwich FG plates A new higher-order theory for the static and dynamic responses of sandwich FG plates [Volume 52, Issue 1, 2021, Pages 102-125]
  • Sandwich nanocomposite structure Deflection, buckling and vibration analyses for a sandwich nanocomposite structure with foam core reinforced with GPLs and SMAs based on TSDBT [Volume 55, Issue 2, 2024, Pages 289-321]
  • Sandwich plate Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • Sandwich plate Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
  • Sandwich plate Real Time Finite Element Simulation of Thick and Thin Sandwich Plate with Viscoelastic Core and Embedded SMA Wires [Volume 53, Issue 2, 2022, Pages 219-243]
  • Sandwich plate Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
  • Sandwich structure A review on structural response and energy absorption of sandwich structures with 3D printed core [Volume 54, Issue 4, 2023, Pages 623-644]
  • Satellite Design and simulation Sandwich Composite Fairing Shells Using FEM Analyzing [Volume 53, Issue 1, 2022, Pages 55-65]
  • Satureja Mutica The influence of hydro alcoholic extract of Satureja mutica zinc Oxide nanoparticle and zinc complex against coagulase gene expression on standard and clinical isolated of methicillin resistant staphylococcus aureus [Volume 53, Issue 1, 2022, Pages 41-54]
  • Scale parameter A review on stress-driven nonlocal elasticity theory [Volume 52, Issue 3, 2021, Pages 535-552]
  • SCFS thick plate,, Static Bending Solutions for an Isotropic Rectangular Clamped/Simply Supported Plates Using 3-D Plate Theory [Volume 54, Issue 1, 2023, Pages 1-18]
  • Schrö dinger equation Variational principle for the Kaup-Newell system [Volume 54, Issue 3, 2023, Pages 405-409]
  • SCR A Validation Methodology for Urea Spray on Selective Catalytic Reduction Systems [Volume 53, Issue 2, 2022, Pages 157-168]
  • Script Code Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • SDL A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
  • Second-order shear deformation Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • Semi-analytical method Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Semiconducting Behavior of functionally graded semiconducting rod with internal heat source under a thermal shock [Volume 55, Issue 1, 2024, Pages 51-61]
  • Semi-inverse method Shock-like Waves with Finite Amplitudes [Volume 55, Issue 1, 2024, Pages 1-7]
  • Sensitivity Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
  • Sensitivity Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Sensitivity analysis Updating finite element model using frequency domain decomposition method and bees algorithm [Volume 48, Issue 1, 2017, Pages 75-88]
  • Sensitivity analysis Evaluating computational performances of hyperelastic models on supraspinatus tendon uniaxial tensile test data [Volume 52, Issue 1, 2021, Pages 27-43]
  • Sensor Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]
  • Sensor Placement Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • Serial manipulator Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Series active variable-geometry suspension Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
  • Shape factor Thermal Radiation and Shape Factor Effects on Electro-magnetohydrodynamic Tri-hybrid Williamson Liquid Flow Around a Cylinder [(Articles in Press)]
  • Shape Memory Alloy Real Time Finite Element Simulation of Thick and Thin Sandwich Plate with Viscoelastic Core and Embedded SMA Wires [Volume 53, Issue 2, 2022, Pages 219-243]
  • SHAPE-MEMORY ALLOY (SMA) Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
  • Shape optimization Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
  • Shape parameters An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
  • Shear and normal deformation A new higher-order theory for the static and dynamic responses of sandwich FG plates [Volume 52, Issue 1, 2021, Pages 102-125]
  • Shear buckling,, Shear buckling response of FG porous annular sector plate reinforced by graphene platelet subjected to different shear loads [Volume 54, Issue 1, 2023, Pages 68-86]
  • Shear deformation On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
  • Shear stress fields Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Shell A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
  • Shell and tube heat exchanger Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
  • Shell and tube heat exchanger Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Shell of revolution Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
  • Shock Wave Shock-like Waves with Finite Amplitudes [Volume 55, Issue 1, 2024, Pages 1-7]
  • Short Piezo Fuzzy Fiber Reinforced Composite (SPFFRC) Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
  • Silver nanocubes Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
  • Silver nanospheres Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
  • SIMPLE method Numerical simulation of the mixing layer problem based on a new two-fluid turbulence model [Volume 53, Issue 2, 2022, Pages 282-296]
  • Single phase flow Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Single-walled carbon nanotube On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Size effect Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
  • Sliding mode Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
  • SMA Deflection, buckling and vibration analyses for a sandwich nanocomposite structure with foam core reinforced with GPLs and SMAs based on TSDBT [Volume 55, Issue 2, 2024, Pages 289-321]
  • SMA Actuator Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
  • Small scale Refined plate theory for free vibration analysis of FG nanoplates using the nonlocal continuum plate model [Volume 48, Issue 1, 2017, Pages 123-136]
  • Small scale effect Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
  • Smart Materials A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
  • Smart Water Injection Review of Enhanced Oil Recovery Decision Making in Complex Carbonate Reservoirs: Fluid Flow and Geomechanics Mechanisms [Volume 52, Issue 2, 2021, Pages 350-365]
  • Soft core Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
  • Softcore and hardcore On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
  • Soil bulk density Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
  • Soil compaction Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
  • Solar charging station Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
  • Sonography Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Source parameters Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
  • Special cells Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [Volume 52, Issue 3, 2021, Pages 423-432]
  • Specific heat capacity Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
  • Spectral Finite Element Method Unified refined beam theory applied to the Spectral Finite Element Method for analysis of laminated composites. [Volume 52, Issue 1, 2021, Pages 44-60]
  • Speed of drawing Improving Product Quality of Wire Drawing Process Using Design of Experiments [Volume 55, Issue 1, 2024, Pages 8-25]
  • Spherical Vessel Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • SPH method Replacing friction model with interaction between particles in analyzing orthogonal and rotational cutting processes using SPH method [Volume 52, Issue 2, 2021, Pages 297-306]
  • Spillways Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • Spline Milling Experimental investigation of hard spline milling using a newly developed disk cutter [Volume 53, Issue 1, 2022, Pages 116-125]
  • Sprain Biomechanical differences between individuals with chronic ankle instability, copers and healthy controls in the countermovement jump on the force plate [Volume 53, Issue 3, 2022, Pages 356-362]
  • Spur Experimental and numerical investigation of flow patterns in symmetrical spurs [Volume 54, Issue 3, 2023, Pages 425-436]
  • Squeeze film damping Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
  • SSFS thick plate Analytical Elasticity Solution for Accurate Prediction of Stresses in a Rectangular Plate Bending Analysis Using Exact 3-D Theory [Volume 54, Issue 2, 2023, Pages 167-185]
  • Stability Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]
  • Stability Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Stall margin Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Stand-off distance Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Static analysis 3-node Basic Displacement Functions in Analysis of Non-Prismatic Beams [Volume 46, Issue 1, 2015, Pages 77-91]
  • Static Magnetic Field Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
  • Static torsion Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
  • Statistical features A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
  • Steel deck Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Steering Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel [Volume 46, Issue 1, 2015, Pages 63-68]
  • Steering From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • Stenosis Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Stephane number Numerical Details of Convective Heat Transfer by Micro-Encapsulated PCM Case Study: Annular Slurry Flow [Volume 53, Issue 1, 2022, Pages 66-82]
  • Stepped Spillway Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
  • STIFF INCLUSION Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Stiffness The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
  • Stiffness control Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Strain gradient elasticity theory Buckling analysis of three-dimensional functionally graded Euler-Bernoulli nanobeams based on the nonlocal strain gradient theory [Volume 53, Issue 1, 2022, Pages 24-40]
  • Strain gradient theory Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
  • Strain gradient theory Size dependent nano-spherical pressure vessels based on strain gradient theory [Volume 52, Issue 2, 2021, Pages 307-319]
  • Stress analysis Size dependent nano-spherical pressure vessels based on strain gradient theory [Volume 52, Issue 2, 2021, Pages 307-319]
  • Stress distribution Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • Stress Intensity Factor A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
  • Stretching sheet Numerical study of Casson nanofluid over an elongated surface in presence of Joule heating and viscous dissipation: Buongiorno model analysis [Volume 53, Issue 3, 2022, Pages 414-430]
  • Stretching sheet Radiation effect on the flow of Magneto Hydrodynamic nanofluids over a stretching surface with Chemical reaction [Volume 53, Issue 4, 2022, Pages 494-509]
  • Stretching sheet Therapeutic applications of Darcy-Forchheimer hybrid nanofluid flow and mass transfer over a stretching sheet [Volume 53, Issue 4, 2022, Pages 585-598]
  • Stretching sheet Thermal Radiation and Magnetic Fields Effects on Nanofluids flowing through Stretch Sheet [Volume 54, Issue 1, 2023, Pages 111-126]
  • Stretching sheet Exploring Three-Dimensional MHD Maxwell Hybrid Nanofluid Flow: A Computational Study on a Stretching sheet [Volume 55, Issue 1, 2024, Pages 77-91]
  • Stretching Sheet Porous Medium Numerical Investigation of MHD Carreau Hybrid Nanofluid Flow over a Stretching Sheet in a Porous Medium with Viscosity Variations and Heat Transport [Volume 54, Issue 3, 2023, Pages 410-424]
  • String stability A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
  • Structural response A review on structural response and energy absorption of sandwich structures with 3D printed core [Volume 54, Issue 4, 2023, Pages 623-644]
  • Subcooled flow boiling Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Subcooled flow boiling Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • Surface effects Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
  • Surface-enhanced Raman spectroscopy (SERS) A Review of Paper-Based Substrates as Surface-Enhanced Raman Spectroscopy (SERS) Biosensors and Microfluidic Paper-Based SERS Platforms [Volume 53, Issue 1, 2022, Pages 142-156]
  • Surface Enhanced Raman Spectroscopy (SERS) Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
  • Surface premelting Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
  • Surface with a hole Four different types of a single drop dripping down a hole under gravity by lattice Boltzmann method [Volume 47, Issue 1, 2016, Pages 89-98]
  • Sutured porous material Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
  • Switched nonlinear cascade systems A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
  • S-W-S connection Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]
  • Symmetric Laminated Plates THE RADIAL POINT INTERPOLATION METHOD IN THE BENDING ANALYSIS OF SYMMETRIC LAMINATES USING HSDTS [Volume 52, Issue 4, 2021, Pages 682-716]

T

  • Taguchi Method Optimum parameters of nonlinear integrator using design of experiments based on Taguchi method [Volume 46, Issue 2, 2015, Pages 233-241]
  • Taxol Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
  • Temperature-Dependent Properties An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • Temperature-dependent thermal conductivity Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Temperature-Dependent Thermal Conductivity and Internal Heat Generation, Chebyshev spectral collocation method Analysis of Heat transfer in Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 271-284]
  • Temperature distribution Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
  • Temperature distribution An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • Temperature gradients Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Temperature profile Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Temperature profile Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Temperature-responsive hydrogel Kinetics of swelling of cylindrical functionally graded temperature-responsive hydrogels [Volume 51, Issue 2, 2020, Pages 464-471]
  • Tensile Strength Improving Product Quality of Wire Drawing Process Using Design of Experiments [Volume 55, Issue 1, 2024, Pages 8-25]
  • TGA Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
  • Thermal barrier coating Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Thermal conductivity Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
  • Thermal conductivity coefficient On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Thermal Energy Storage Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
  • Thermal load Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
  • Thermal performance Analysis of Heat transfer in Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 271-284]
  • Thermal performance Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Thermal Shock Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Thermal Shock Analyzing the Thermoelastic Responses of Biological Tissue Exposed to Thermal Shock Utilizing a Three-Phase Lag Theory [Volume 55, Issue 2, 2024, Pages 144-164]
  • Thermal stability Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Thermal Strain An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • Thermo-elastic Bi-Directional Thermo-Elastic Analysis of Pressurized Thick Cylindrical Shell with Nonlinear Variable Thickness [Volume 55, Issue 1, 2024, Pages 125-143]
  • Thermoelastic analysis Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
  • Thermoelasticity Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
  • Thermoelasticity Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
  • Thermoelasticity Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
  • Thermoelasticity Modified couple stress model for thermoelastic microbeams due to temperature pulse heating [Volume 53, Issue 1, 2022, Pages 83-101]
  • Thermoelasticity Study of a Half-Space Via a Generalized Dual Phase-lag Model with Variable Thermal Material Properties and Memory-Dependent Derivative [Volume 53, Issue 2, 2022, Pages 264-281]
  • Thermoelasticity The study of vibrations in the context of porous micropolar media thermoelasticity and the absence of energy dissipation [Volume 54, Issue 3, 2023, Pages 437-454]
  • Thermoelastic theory A thermo-elastic model with a single relaxation time of an unbounded medium heated by a heat supply and moving vertically [Volume 53, Issue 3, 2022, Pages 431-443]
  • Thermo-Mechanical Stress Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • The virtual work principle A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
  • Thick cylinder Bi-Directional Thermo-Elastic Analysis of Pressurized Thick Cylindrical Shell with Nonlinear Variable Thickness [Volume 55, Issue 1, 2024, Pages 125-143]
  • Thick cylindrical pressure vessel Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions [Volume 48, Issue 1, 2017, Pages 15-26]
  • Thick cylindrical shell Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
  • Thickness of water layer Water thickness effect on the fin efficiency and heat transfer for partially wet-surface heat exchanger [Volume 47, Issue 2, 2016, Pages 195-207]
  • Thick plate A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Thick rectangular plates Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates [Volume 54, Issue 3, 2023, Pages 347-364]
  • Thick-walled A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
  • Thick-walled sphere Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Thin Elastic Layer A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
  • Thin-wall beam Comparative study on the lateral stability strength of laminated composite and fiber-metal laminated I-shaped cross-section beams [Volume 53, Issue 2, 2022, Pages 190-203]
  • Third -order beam theory Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading [Volume 53, Issue 1, 2022, Pages 1-23]
  • Third-order shear deformation Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • Third order shear deformation theory Elastostatic behaviour of functionally graded porous beams: novel Kuhn Tucker conditions with R program for mathematical computing [Volume 55, Issue 2, 2024, Pages 165-183]
  • Third-order shear deformation theory Thermo-elastic creep analysis and life assessment of rotating thick pressurized cylindrical shells using third-order shear deformation theory [Volume 52, Issue 3, 2021, Pages 366-393]
  • Three-dimensional model Modeling and Simulations of Multi-dimensional Thermal Behaviours of Plates during Friction Stir Additive Manufacturing [Volume 53, Issue 3, 2022, Pages 363-378]
  • Three-directional functionally graded materials (TDFGMs) Buckling analysis of three-dimensional functionally graded Euler-Bernoulli nanobeams based on the nonlocal strain gradient theory [Volume 53, Issue 1, 2022, Pages 24-40]
  • Three-Layer Plate Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
  • Three Stage Centrifugal Compressor Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
  • Time delay Fuzzy logic-based variable impedance control for a bilateral teleoperation system under time delay [(Articles in Press)]
  • Time-Frequency Domain A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
  • Timoshenko beams Effect of Porosity on the Static Response of Rotating and Non-Rotating Porous Timoshenko Beam [Volume 55, Issue 2, 2024, Pages 209-222]
  • Timoshenko Beam Theory Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
  • Timoshenko-Ehrenfest beam A Ritz Formulation for Vibration Analysis of Axially Functionally Graded Timoshenko-Ehrenfest Beams [Volume 53, Issue 1, 2022, Pages 102-115]
  • Tip gap Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Tissue modeling Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Topology optimization Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
  • Total Lagrangian Geometrically nonlinear analysis of axially functionally graded beams by using finite element method [Volume 51, Issue 2, 2020, Pages 411-416]
  • Transformation matrix Flexibility Matrix and Stiffness Matrix of 3D Curved Beam with Varying Curvature and Varying Cross-Sectional Area using Finite Displacement Transfer Method [Volume 54, Issue 4, 2023, Pages 552-576]
  • Transient analysis Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
  • Transient thermo-elastic Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions [Volume 48, Issue 1, 2017, Pages 15-26]
  • Trapezoidal V-shaped cantilever Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
  • Triangular Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
  • Triangular beam Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
  • Triangular sectioned weirs Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • Tri-hybrid nanoliquid Thermal Radiation and Shape Factor Effects on Electro-magnetohydrodynamic Tri-hybrid Williamson Liquid Flow Around a Cylinder [(Articles in Press)]
  • Tube Hydroforming Simultaneous hydroforming of bulge- and T-zone in 304 stainless steel and 70/30 brass tubes [Volume 51, Issue 1, 2020, Pages 213-230]
  • Tumor ablation Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
  • Turbomachinery Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Turbulence fluid flow Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Turbulence Modeling Numerical Simulation of Atmospheric Boundary Layer Over Laboratory Scale Two-Dimensional Hill Using Pressure-Driven Boundary Condition [Volume 53, Issue 3, 2022, Pages 379-392]
  • Turbulent Flow Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
  • Turning Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel [Volume 46, Issue 1, 2015, Pages 63-68]
  • Turning From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • T-way Simultaneous hydroforming of bulge- and T-zone in 304 stainless steel and 70/30 brass tubes [Volume 51, Issue 1, 2020, Pages 213-230]
  • Two-fluid model Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Two-fluid model Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Two-fluid model Numerical simulation of the mixing layer problem based on a new two-fluid turbulence model [Volume 53, Issue 2, 2022, Pages 282-296]
  • Two-Phase Performance Study of Partially Heated Annulus Filled with Two-Phase Nanofluid: Energy Perspective [Volume 55, Issue 1, 2024, Pages 39-50]
  • Two phase flow Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Two phase flow Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Two-phase flow Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Two-phase flow Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Type-II Fuzzy Logic Controller Routing and avoiding collisions of autonomous robots in unknown environments with fixed and moving obstacles [Volume 53, Issue 2, 2022, Pages 169-182]

U

  • UAV Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
  • Ultrasmall particles A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
  • Ultrasonic Guided Waves Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
  • Ultrasound imaging Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Ultraviolet Effects The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Under-Balanced Drilling Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Under-Balanced Drilling (UBD) Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Under-Balanced Drilling (UBD) Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Underwater explosion (UNDEX) Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Uniaxial stretching Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
  • Unicycle Mobile Robot Implementation of Behavior-Based Navigation Algorithm on Four-Wheel Steering Mobile Robot [Volume 52, Issue 4, 2021, Pages 619-641]
  • Unimorph Piezoelectric vibrator Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
  • Unsteady flow Unsteady Magneto Hydro Dynamic Flow of a Second Order Fluid over an Oscillating Sheet with a Second Order Slip Flow Model [Volume 47, Issue 2, 2016, Pages 209-218]
  • Unsteady squeezing flow Fourier-Homotopy Perturbation Method for Heat and Mass Transfer with 2D Unsteady Squeezing Viscous Flow Problem [Volume 54, Issue 2, 2023, Pages 219-235]
  • Urea Spray A Validation Methodology for Urea Spray on Selective Catalytic Reduction Systems [Volume 53, Issue 2, 2022, Pages 157-168]

V

  • Valve opening Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
  • Variable fill coupling Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Variable foundation Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Variable internal heat generation Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
  • Variable thermal conductivity Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
  • Variable Thermal Material Properties Study of a Half-Space Via a Generalized Dual Phase-lag Model with Variable Thermal Material Properties and Memory-Dependent Derivative [Volume 53, Issue 2, 2022, Pages 264-281]
  • Variable thickness Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • Variable thickness Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Variable thickness Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
  • Variable thickness Bi-Directional Thermo-Elastic Analysis of Pressurized Thick Cylindrical Shell with Nonlinear Variable Thickness [Volume 55, Issue 1, 2024, Pages 125-143]
  • Variational iteration method Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
  • Variational Kantorovich-Vlasov method Exact Analytical Solutions to Bending Problems of SFrSFr Thin Plates Using Variational Kantorovich-Vlasov Method [Volume 54, Issue 2, 2023, Pages 186-203]
  • Variational theory Variational principle for the Kaup-Newell system [Volume 54, Issue 3, 2023, Pages 405-409]
  • Variation parameter method On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
  • VARTM Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
  • Vehicle safety Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
  • Vehicular platoons A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
  • Vibration Active control vibration of circular and rectangular plate with Quantitative Feedback Theory (QFT) Method [Volume 47, Issue 2, 2016, Pages 261-271]
  • Vibration A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Vibration A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Vibration Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • Vibration The study of vibrations in the context of porous micropolar media thermoelasticity and the absence of energy dissipation [Volume 54, Issue 3, 2023, Pages 437-454]
  • Vibration Vibration Behaviour of Shear Deformable Laminated Plates Composed of Non-Homogeneous Layers [Volume 55, Issue 2, 2024, Pages 201-208]
  • Vibrational analysis A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [Volume 52, Issue 3, 2021, Pages 408-422]
  • Vibration analysis Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
  • Vibration analysis Refined plate theory for free vibration analysis of FG nanoplates using the nonlocal continuum plate model [Volume 48, Issue 1, 2017, Pages 123-136]
  • Vibration analysis Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Vibration analysis A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
  • Vibration analysis Effect of Different Kernel Normalization Procedures on Vibration Behaviour of Calibrated Nonlocal Integral Continuum Model of Nanobeams [Volume 53, Issue 4, 2022, Pages 639-656]
  • Vibration analysis Vibration analysis of the Gamma-Ray element in the ELI-NP interaction chamber (IC) [Volume 55, Issue 2, 2024, Pages 275-288]
  • Vibration and buckling analysis Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Vibration answer Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
  • Vibration energy harvesting Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
  • Vibrations Vibration of inhomogeneous fibrous laminated plates using an efficient and simple polynomial refined theory [Volume 52, Issue 2, 2021, Pages 233-245]
  • Viscoelastic Transient thermo-visco-elastic response of a functionally graded non-axisymmetric cylinder [Volume 46, Issue 2, 2015, Pages 191-204]
  • Viscoelastic Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model [Volume 50, Issue 1, 2019, Pages 148-156]
  • Viscoelastic The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Viscoelastic Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
  • Viscoelastic Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
  • Viscoelastic Viscoelastic effects on nonlinear dynamics of microplates with fluid interaction based on consistent couple stress theory [Volume 52, Issue 3, 2021, Pages 394-407]
  • Viscoelastic adhesive Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Viscoelastic annular plate Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
  • Visco-elastic foundation Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
  • Viscoelastic foundation Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading [Volume 53, Issue 1, 2022, Pages 1-23]
  • Viscoelasticity An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
  • Viscoelasticity Bending Response of a Rotating Viscoelastic Functionally Graded Porous Disk with Variable Thickness [Volume 54, Issue 4, 2023, Pages 482-500]
  • Viscoelastic model Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Viscoelastic-Newtonian fluid Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Viscoelastic properties Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
  • Viscoelastic RANS Model Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
  • Visco-Pasternak foundation Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
  • Viscous On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
  • Visualization A Validation Methodology for Urea Spray on Selective Catalytic Reduction Systems [Volume 53, Issue 2, 2022, Pages 157-168]
  • Vitreous Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • VOF model Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • Void fraction Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Voids The study of vibrations in the context of porous micropolar media thermoelasticity and the absence of energy dissipation [Volume 54, Issue 3, 2023, Pages 437-454]
  • Von Karman strain Nonlocal effect on the axisymmetric nonlinear vibrational response of nano-disks using variational iteration method [Volume 52, Issue 3, 2021, Pages 507-534]
  • Vortex Flow Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • VUMAT Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]

W

  • Wave form MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
  • Wave Propagation Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
  • Wave Reflection Coefficient Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
  • Waviness A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
  • Wavy cavity MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
  • Wavy pattern MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
  • Weak form A Ritz Formulation for Vibration Analysis of Axially Functionally Graded Timoshenko-Ehrenfest Beams [Volume 53, Issue 1, 2022, Pages 102-115]
  • Weibull function Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran [Volume 47, Issue 1, 2016, Pages 53-66]
  • WENO schemes Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
  • Westervelt equation Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
  • Williamson fluid Thermal Radiation and Shape Factor Effects on Electro-magnetohydrodynamic Tri-hybrid Williamson Liquid Flow Around a Cylinder [(Articles in Press)]
  • Wind farm simulation Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology [Volume 54, Issue 4, 2023, Pages 533-551]
  • Window To Wall Ratio (WWR) Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • Winkler-Pasternak’s medium Forced vibration of a magnetoelastic laminated composite beam on Pasternak’s foundation [Volume 52, Issue 3, 2021, Pages 478-497]
  • Wire drawing Improving Product Quality of Wire Drawing Process Using Design of Experiments [Volume 55, Issue 1, 2024, Pages 8-25]
  • Wood density Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]

X

  • XRD Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]

Y

  • YSZ Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]

Z

  • Zero-Energy Building Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • ZnO piezoelectric layer Nonlocal DQM for a Nonlinear Buckling Analysis of DLGSs Integrated with Zno Piezoelectric Layers [Volume 45, Issue 1, 2014, Pages 9-22]
  • Zonal methodology Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [Volume 52, Issue 3, 2021, Pages 423-432]
  • Zou-He boundary condition The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]