A

  • Abbasi, Morteza Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
  • AbbasiMoshaii, Alireza Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Abbasszadeh Rad, Amirhossein A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
  • Abd-Alhameed, Raed Analysis of Flow of Nanofluid through a Porous Channel with Expanding or Contracting Walls using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 225-232]
  • Abd-Alhameed, Raed Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Abdelkarim, Bouras Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
  • Abiodun, Yetunde Dynamic behaviour of concrete containing aggregate resonant frequency [Volume 49, Issue 2, 2018, Pages 380-385]
  • Abouali, Omid Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Abouei Mehrizi, Ali Fractional Order PID Controller for Diabetes Patients [Volume 46, Issue 1, 2015, Pages 69-76]
  • Abouei Mehrizi, Ali Numerical Study of Droplet Generation Process in a Microfluidic Flow Focusing [Volume 46, Issue 2, 2015, Pages 167-175]
  • Abouelregal, Ahmed Rotating magneto-thermoelastic rod with finite length due to moving heat sources via Eringen’s nonlocal model [Volume 50, Issue 1, 2019, Pages 118-126]
  • Abouelregal, Ahmed Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model [Volume 50, Issue 1, 2019, Pages 148-156]
  • Abouelregal, Ahmed Nonlocal thermoelastic semi-infinite medium with variable thermal conductivity due to a laser short-pulse [Volume 50, Issue 1, 2019, Pages 90-98]
  • Abouelregal, Ahmed Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
  • Abouelregal, Ahmed Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
  • Abtahi, Mohammad A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Adegoke, Adeshina Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Adeosun, Samson Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Adeosun, Samson Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Adewumi, Olayinka NUMERICAL INVESTIGATION OF THE PERFORMANCE OF FIBRE-GLASS/TALC FILLED EPOXY COMPOSITE AS INSULATOR IN HEATING APPLICATIONS [(Articles in Press)]
  • Adewumi, Omowumi Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Afshari, Asghar A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Afshin, Azam Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions [Volume 48, Issue 1, 2017, Pages 15-26]
  • Afzal, Seyed Ali Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Agha Seyed Mirzabozorg, Mohsen Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Ahmadi, Firooz Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
  • Ahmadi, Masoud On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Ahmadi, Pouria Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran [Volume 47, Issue 1, 2016, Pages 53-66]
  • Ahmadi, Razie Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
  • Ahmadi, Yousef Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
  • Ahmadi Balootaki, Mohammad Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
  • Ahmadi Danesh Ashtiani, Hossein Optimal Design of Shell-and-Tube Heat Exchanger Based on Particle Swarm Optimization Technique [Volume 46, Issue 1, 2015, Pages 21-29]
  • Ai, Jafar Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Ailawalia, Praveen Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
  • A. J., Antony Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • Ajay, Gautham Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Ajiboye, Joseph Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Ajri, Masoud Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
  • Akbari, Aliakbar Optimum parameters of nonlinear integrator using design of experiments based on Taguchi method [Volume 46, Issue 2, 2015, Pages 233-241]
  • Akbari, Ali Akbar Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Akbari, Hamid Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
  • Akbari Mousavi, S. A. A. Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
  • Akbaş, Şeref Doğuşcan Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
  • Akbaş, Şeref Doğuşcan Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Akbaş, Şeref Doğuşcan Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
  • Akbaş, Şeref Doğuşcan Geometrically nonlinear analysis of axially functionally graded beams by using finite element method [Volume 51, Issue 2, 2020, Pages 411-416]
  • AkhavanBehabadi, Mohammad Ali Comparative study between dynamic transient and degree-hours methods to estimate heating and cooling loads of building’s wall [Volume 46, Issue 2, 2015, Pages 153-165]
  • Akinshilo, Akinbowale Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
  • Alavi, Sayed Ehsan Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
  • Alavi, Sayed Ehsan Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Alimirzaloo, Vali Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Alimouri, Pouyan Updating finite element model using frequency domain decomposition method and bees algorithm [Volume 48, Issue 1, 2017, Pages 75-88]
  • Alipour, Farokh Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Alipour, Farokh Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Alizadeh, Asad Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Alkasasbeh, Hamzeh A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • ALKhalafat, Shaima A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Alshoaibi, Abdulnaser A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
  • Amadeh, Ahmad Ali Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Amir, Saeed Nonlinear Flow-Induced Flutter Instability of Double CNTs Using Reddy Beam Theory [Volume 46, Issue 1, 2015, Pages 1-12]
  • Amirfazli, Alidad Sessile and Pendant Micro-Liter Drops Evaporate at Different Rates: An Experimental Approach [Volume 47, Issue 1, 2016, Pages 109-119]
  • Amiri, Alireza Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
  • Amiri Moghadam, Hamed Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
  • Ansari, Mohammad Reza Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
  • Ansari, Reza On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
  • Arda, Mustafa Longitudinal Magnetic Field Effect on Torsional Vibration of Carbon Nanotubes [Volume 49, Issue 2, 2018, Pages 304-313]
  • Ardekani, Mohammad Ali Effect of Wind on Thermal Performance of Heller Dry Cooling Tower [Volume 45, Issue 1, 2014, Pages 1-8]
  • Arman, Milad Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]
  • Asgari, M. Closed-form Molecular Mechanics Formulations for the 3D Local Buckling and 2D Effective Young’s Modulus of the Nanosheets [Volume 46, Issue 1, 2015, Pages 51-62]
  • Ashenai Ghasemi, Faramarz A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [(Articles in Press)]
  • A. Shirazi, Farzad Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • Ashofteh, Afshin Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Askari, Amir Numerical simulation of the effect of particle size on the erosion damage in ball valves of pressure reducing station [Volume 52, Issue 1, 2021, Pages 1-11]
  • Askari, Amir Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
  • Asnaashari, Erfan Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • Assari, Mohammad Reza Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Ataee, Aliasghar Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • Ataee, Aliasghar Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
  • Ataee, Aliasghar Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Ataee, Ali Asghar Numerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming [Volume 45, Issue 1, 2014, Pages 35-45]
  • Attaran, Behrooz A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
  • Attarnejad, Reza 3-node Basic Displacement Functions in Analysis of Non-Prismatic Beams [Volume 46, Issue 1, 2015, Pages 77-91]
  • Attarnejad, Reza Numerical free vibration analysis of higher-order shear deformable beams resting on two-parameter elastic foundation [Volume 46, Issue 2, 2015, Pages 117-131]
  • Attarnejad, Reza Analysis of Euler-Bernoulli nanobeams: A mechanical-based solution [Volume 47, Issue 2, 2016, Pages 159-180]
  • Awrejcewicz, Jan Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
  • Ayatolah Zadeh Shirazi, Farzad Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
  • Aydogdu, Metin Longitudinal Magnetic Field Effect on Torsional Vibration of Carbon Nanotubes [Volume 49, Issue 2, 2018, Pages 304-313]
  • Azad, Saber Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
  • Azadi, AhmadReza Active control vibration of circular and rectangular plate with Quantitative Feedback Theory (QFT) Method [Volume 47, Issue 2, 2016, Pages 261-271]
  • Azadi Moghaddam, Masoud An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
  • Azami, Amirhossein The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Azarlu, Ehsan Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
  • Azimi, Aziz Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Azimi, Aziz Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Azimi, Mohsen Energy Dissipation Rate Control Via a Semi-Analytical Pattern Generation Approach for Planar Three-Legged Galloping Robot based on the Property of Passive Dynamic Walking [Volume 46, Issue 1, 2015, Pages 31-39]
  • Azimi, Shahab Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]

B

  • B, Chinna Ankanna Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • Baba Akbar Zarei, Hassan Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
  • Babadi, Mohammad Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
  • Bahrami, Ali The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
  • Bahrami, Arian Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Bahrami, Saeed Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Bahreini, Amir Numerical and Economic Study of Performance of Centrifugal Pump as Turbine [Volume 48, Issue 2, 2017, Pages 151-160]
  • Balsa, Carlos Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Balsa, Carlos A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
  • Baradaran, Hossein Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
  • Barati, Abbas Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
  • Barati, Abbas Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
  • Barati, Abbas Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
  • Barati, Ehsan Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • Basaeri, Hamid Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
  • Bathini, Sidda Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
  • Bathini, Sidda Reddy Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • Bathini, Sidda Reddy A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
  • Bavarsad Salehpoor, Iman Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
  • Bayat, Amirhossein Numerical Analysis of explosion effects on the redistribution of residual stresses in the underwater welded pipe [Volume 47, Issue 1, 2016, Pages 121-128]
  • Bayat, Javad Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Bazazzadeh, Mehrdad Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Behbahani-Nejad, Morteza Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
  • Behjat, Amir Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Behrouzi, Kamyar Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
  • Beigzadeh, Borhan From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • Beigzadeh, Borhan Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
  • Benbrik, Abderrahmane A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
  • Biglarkhani, Masoud Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Bonakdar, Shahin Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
  • Bouanani, Mohammed A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
  • Bouazza, Mokhtar Vibration of inhomogeneous fibrous laminated plates using an efficient and simple polynomial refined theory [Volume 52, Issue 2, 2021, Pages 233-245]

C

  • Carreiras, Ana Rita The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
  • Chahartaghi, Mahmood Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
  • Chahartaghi, Mahmoud Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
  • Chand, Ramesh On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
  • Chehardoli, Hossein A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
  • Chehardoli, Hossein A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
  • Cheraghali, Mohammad Hassan Optimal Design of Shell-and-Tube Heat Exchanger Based on Particle Swarm Optimization Technique [Volume 46, Issue 1, 2015, Pages 21-29]
  • Cherifi, Mohammed A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
  • Chini, Seyed Farshid Sessile and Pendant Micro-Liter Drops Evaporate at Different Rates: An Experimental Approach [Volume 47, Issue 1, 2016, Pages 109-119]
  • Chini, Seyed Farshid Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
  • Chinipardaz, Rahim Updating finite element model using frequency domain decomposition method and bees algorithm [Volume 48, Issue 1, 2017, Pages 75-88]
  • Choulaie, Mohammad Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Civalek, Omer Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Couto, Rui The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]

D

  • Dabbagh, Ali A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Dabbagh, Ali A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
  • Dai, HuLiang Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Danehdezfuli, Alireza Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Daneh Dezfuli, Alireza Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Daneshmehr, Alireza Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • Daneshmehr, Alireza Attractor Based Analysis of Centrally Cracked Plate Subjected to Chaotic Excitation [Volume 51, Issue 1, 2020, Pages 199-212]
  • Danjuma, Isa Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Dargazany, Roozbeh Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Da Rocha, Fabio Carlos Unified refined beam theory applied to the Spectral Finite Element Method for analysis of laminated composites. [Volume 52, Issue 1, 2021, Pages 44-60]
  • Dastani, Kia Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
  • Dastani, Kia Dielectrophoretic effect of nonuniform electric fields on the protoplast cell [Volume 48, Issue 1, 2017, Pages 1-14]
  • Dastani, Kia Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions [Volume 48, Issue 1, 2017, Pages 15-26]
  • Dastani, Kia Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Davaria, Sheyda Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Dehghani, Mohammad Replacing friction model with interaction between particles in analyzing orthogonal and rotational cutting processes using SPH method [Volume 52, Issue 2, 2021, Pages 297-306]
  • Dianatipoor, Farzin Performance Improvements of a Centrifugal Pump with Different Impellers using Polymer Additive [Volume 48, Issue 2, 2017, Pages 199-206]
  • Divsalar, Mehdi Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
  • Djedid, Taloub Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]

E

  • Ebrahimi, Farzad A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
  • Ebrahimi, Farzad A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
  • Ebrahimi, Morteza A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
  • Ebrahimi-Barough, Somayeh Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Eghtesad, Mohammad A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
  • Eipakchi, Hamidreza Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
  • Eisazadeh, Hamid Numerical Simulation of Nugget Geometry and Temperature Distribution in Resistance Spot Welding [Volume 46, Issue 1, 2015, Pages 13-19]
  • El-Dib, Yusry Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
  • El-Shahrany, Hela Vibration suppression analysis for laminated composite beams embedded actuating magnetostrictive layers [Volume 50, Issue 1, 2019, Pages 69-75]
  • Emdad, Homayoun Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
  • Ershadbakhsh, Amir Mohsen Analysis of Euler-Bernoulli nanobeams: A mechanical-based solution [Volume 47, Issue 2, 2016, Pages 159-180]
  • Eskandari, Mohammadreza Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran [Volume 47, Issue 1, 2016, Pages 53-66]
  • Eskandari, Vahid Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
  • Esmaeili, Mohammad Hassan A mesh generation procedure to simulate bimaterials [Volume 46, Issue 2, 2015, Pages 177-190]
  • Etesami, Ghazal Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]

F

  • Fahimifar, Ahmad Review of Enhanced Oil Recovery Decision Making in Complex Carbonate Reservoirs: Fluid Flow and Geomechanics Mechanisms [Volume 52, Issue 2, 2021, Pages 350-365]
  • Fakhar, Ahmad Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
  • Fakhar, Mohammad Hosein Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
  • Falavand Jozaei, Ali Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Falavand Jozaei, Ali Numerical simulation of the effect of particle size on the erosion damage in ball valves of pressure reducing station [Volume 52, Issue 1, 2021, Pages 1-11]
  • Falavand Jozaei, Ali Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
  • Falavand Jozaei, Ali Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Falavand Jozaei, Ali Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Falavand Jozaei, Ali Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [(Articles in Press)]
  • Falavand Jozaei, Ali Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Fallahzadeh R., S. Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Farahat, Said Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
  • Farahat, Said Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • Farahmand, Saeed Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
  • Farajpour, Ali Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
  • Farajpour, Daniyal A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
  • Farajpour, Mohammad Reza Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
  • Farajpour, Mohammad Reza Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Farhani, Foad Effect of Wind on Thermal Performance of Heller Dry Cooling Tower [Volume 45, Issue 1, 2014, Pages 1-8]
  • Faridi Rad, Nafise Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
  • Farzaneh, Amir Optimization of Dimensional Deviations in Wax Patterns for Investment Casting [Volume 45, Issue 1, 2014, Pages 23-28]
  • Fashanu, Akin Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Fatahi, Laleh Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Fatahi, Laleh The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • Fazli Shahri, Hamid Reza Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Felezi, Mohammad Ebrahim Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
  • Fereidoon, Abdolhosein Nonlocal DQM for a Nonlinear Buckling Analysis of DLGSs Integrated with Zno Piezoelectric Layers [Volume 45, Issue 1, 2014, Pages 9-22]
  • Fereidoon, Abdolhossein Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
  • Fereshteh-saniee, Faramarz An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Firouzi, Behnam Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
  • Fonseca, Elza M. M. Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]
  • Fonseca, Elza M. M. The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]

G

  • Ghadle, Kirtiwant P. Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
  • Ghafouri, Ashkan Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
  • Ghajar, Rahmatollah Transient thermo-visco-elastic response of a functionally graded non-axisymmetric cylinder [Volume 46, Issue 2, 2015, Pages 191-204]
  • Ghanavati, Ali The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
  • Ghanbarzadeh, Afshin Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Ghanbarzadeh, Afshin A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
  • Ghannad, Mehdi Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • Ghannad, Mehdi Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Ghannad, Mehdi An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • Gharibi, Mahboobeh Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Gharooni, Hamed Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
  • Gharooni, Hamed Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
  • Ghasemi, Ahmad Reza Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Ghasemi, Mohsen Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
  • Ghasemian, Masoud Aerodynamic Noise Computation of the Flow Field around NACA 0012 Airfoil Using Large Eddy Simulation and Acoustic Analogy [Volume 46, Issue 1, 2015, Pages 41-50]
  • Ghassemieh, Mehdi Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
  • Ghassemieh, Mehdi Strongly stable multi-time stepping method with the option of controlling amplitude decay in responses [Volume 49, Issue 1, 2018, Pages 133-142]
  • Ghazi Mirsaeed, Seyed Ali An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
  • Ghaznavi, Aidin Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
  • Ghobadpouri, Saeed Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Ghobadpouri, Saeed Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Ghorbanhosseini, Sadegh Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
  • Ghorbanpour Arani, Ali Nonlocal DQM for a Nonlinear Buckling Analysis of DLGSs Integrated with Zno Piezoelectric Layers [Volume 45, Issue 1, 2014, Pages 9-22]
  • Ghorbanpour Arani, Ali Nonlinear Flow-Induced Flutter Instability of Double CNTs Using Reddy Beam Theory [Volume 46, Issue 1, 2015, Pages 1-12]
  • Ghorbanpour Arani, Ali Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
  • Ghorbanpour Arani, Ali Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
  • Ghugal, Yuwaraj M. On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
  • Gogus, Mustafa Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • Goharimanesh, Masoud Fractional Order PID Controller for Diabetes Patients [Volume 46, Issue 1, 2015, Pages 69-76]
  • Goharimanesh, Masoud Numerical Study of Droplet Generation Process in a Microfluidic Flow Focusing [Volume 46, Issue 2, 2015, Pages 167-175]
  • Goharimanesh, Masoud Optimum parameters of nonlinear integrator using design of experiments based on Taguchi method [Volume 46, Issue 2, 2015, Pages 233-241]
  • Goodarzi, Mostafa Refined plate theory for free vibration analysis of FG nanoplates using the nonlocal continuum plate model [Volume 48, Issue 1, 2017, Pages 123-136]
  • Grzelczyk, Dariusz Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]

H

  • Haddad Soleymani, Siavash Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Hadi, Amin Dielectrophoretic effect of nonuniform electric fields on the protoplast cell [Volume 48, Issue 1, 2017, Pages 1-14]
  • Hadi, Amin Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Hadi, Amin A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
  • Hadi, Amin A review of size-dependent elasticity for nanostructures [Volume 49, Issue 1, 2018, Pages 197-211]
  • Hadi, Amin Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
  • Hadi, Amin Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Hadikhani, Pooria A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Haghani, Reza Four different types of a single drop dripping down a hole under gravity by lattice Boltzmann method [Volume 47, Issue 1, 2016, Pages 89-98]
  • Haghighi, Mojtaba Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Haghighipour, Nooshin Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
  • Haghparast, Elham Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
  • Haghparast, Elham Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
  • Haghshenas Gorgani, Hamid Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
  • Haghshenas Gorgani, Hamid A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
  • Haghshenas Gorgani, Hamid A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
  • Haghshenas Gorgani, Hamid A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Hairi Yazdi, Mohammad Reza Energy Dissipation Rate Control Via a Semi-Analytical Pattern Generation Approach for Planar Three-Legged Galloping Robot based on the Property of Passive Dynamic Walking [Volume 46, Issue 1, 2015, Pages 31-39]
  • Hairi Yazdi, Mohammad Reza Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel [Volume 46, Issue 1, 2015, Pages 63-68]
  • Hairi Yazdi, Mohammad Reza From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • Hajidavalloo, Ebrahim Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Hajidavalloo, Mohammad Reza Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
  • Hajnayeb, Ali Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Halabian, Mahdi Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
  • Hamedi, Mohsen Optimization of Dimensional Deviations in Wax Patterns for Investment Casting [Volume 45, Issue 1, 2014, Pages 23-28]
  • Hamedi, Mohsen Numerical Simulation of Nugget Geometry and Temperature Distribution in Resistance Spot Welding [Volume 46, Issue 1, 2015, Pages 13-19]
  • Hamoud, Ahmed A. Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
  • Hamzezade, Morteza Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
  • Hanafizadeh, Pedram Comparative study between dynamic transient and degree-hours methods to estimate heating and cooling loads of building’s wall [Volume 46, Issue 2, 2015, Pages 153-165]
  • Hanafizadeh, Pedram Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran [Volume 47, Issue 1, 2016, Pages 53-66]
  • Hanafizadeh, Pedram Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • Hasanzadeh, Elham Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Hassan, Amr Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
  • Hassannejad, Zahra Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Heidari, Amin Review of Enhanced Oil Recovery Decision Making in Complex Carbonate Reservoirs: Fluid Flow and Geomechanics Mechanisms [Volume 52, Issue 2, 2021, Pages 350-365]
  • Hekmat, Mohamad Hamed A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
  • Heydari, Mohsen Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
  • Heydarian, Ashkan The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Heydari Shirazi, Kourosh A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • Heydari Shirazi, Kourosh Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]
  • Hidayathulla Khan, B. Md Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
  • Homaienezhad, Mohammad Reza A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
  • Hoseini, Mohamad Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
  • Hosseini, Mohammad Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
  • Hosseini, Mohammad A review of size-dependent elasticity for nanostructures [Volume 49, Issue 1, 2018, Pages 197-211]
  • Hosseini, Mohammad A review on stress distribution, strength and failure of bolted ‎composite joints [Volume 49, Issue 2, 2018, Pages 415-429]
  • Hosseini, Mohammad A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Hosseini, Mohammad Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
  • Hosseini, Parvaneh Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
  • Hosseini, Rouhollah Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
  • Hosseinidoost, Seyed Erfan Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran [Volume 47, Issue 1, 2016, Pages 53-66]

I

  • Ike, Charles ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
  • Ike, Charles GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
  • Ike, Charles Chinwuba Elzaki transform method for finding solutions to two-dimensional elasticity problems in polar coordinates formulated using Airy stress functions [Volume 51, Issue 2, 2020, Pages 302-310]
  • Ike, Charles C. Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Ike, Charles Chinwuba First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
  • Inanlou Shahverdi, Mohammad Ebrahim A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
  • Iranmanesh, Faezeh Analytical Dynamic Modelling of Heel-off and Toe-off Motions for a 2D Humanoid Robot [Volume 46, Issue 2, 2015, Pages 243-256]
  • Isaac Hosseini, Imman Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]

J

  • Jabbari, Mehdi A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
  • Jaberi, Amir Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel [Volume 46, Issue 1, 2015, Pages 63-68]
  • Jafari, Ali Asghar Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]
  • Jafari, Azadeh The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
  • Jafari Naeimi, Kazem Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
  • Jahantigh Pak, Alireza A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
  • Jahantigh Pak, Alireza A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
  • Jahantigh Pak, Alireza A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Jalali, S. Kamal Large Amplitude Vibration Analysis of Graphene Sheets as Resonant Mass Sensors Using Mixed Pseudo-Spectral and Integral Quadrature Methods [Volume 45, Issue 1, 2014, Pages 61-75]
  • Jalalvand, Mehdi Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Jalili, Sina Attractor Based Analysis of Centrally Cracked Plate Subjected to Chaotic Excitation [Volume 51, Issue 1, 2020, Pages 199-212]
  • Jalilirad, Seddigheh Optimal Design of Shell-and-Tube Heat Exchanger Based on Particle Swarm Optimization Technique [Volume 46, Issue 1, 2015, Pages 21-29]
  • Jamali, Majid Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
  • Jamshidi, Rasa Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]
  • Jarrahi Khameneh, armin The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Javanbakht, Amir Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
  • Javanmard, Mohsen Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
  • Javidi, Reza Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Javidi, Reza Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
  • Jayesimi, Lawrence Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
  • Jayesimi, Lawrence Olumide Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Jiang, TianLi Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]

K

  • K, Vijaya Kumar Reddy Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
  • K, Vijaya Kumar Reddy A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
  • Kalatjari, Vahidreza An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
  • Karamali Ravandia, Abbas Nonlinear Flow-Induced Flutter Instability of Double CNTs Using Reddy Beam Theory [Volume 46, Issue 1, 2015, Pages 1-12]
  • Kavand, Hanie Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
  • Keymasi Khalaji, Ali Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
  • Khademifar, Ali Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
  • Khadem Moshir, Saeed Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
  • Khadiv, Majid A Low Friction Demanding Approach in Gait Planning for Humanoid Robots During 3D Manoeuvres [Volume 45, Issue 1, 2014, Pages 47-60]
  • Khalil, Khalil-M Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
  • Khalili, Khalil - Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
  • Khan, S. A. Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
  • Kharazi, Mahsa Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
  • Khoddami Maraghi, Zahra Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
  • Khorram, Mahdi Dynamics modeling and stable gait planning of a quadruped robot in walking over uneven terrains [Volume 46, Issue 2, 2015, Pages 205-220]
  • Khorramymehr, Siamak The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Kimura, Erica A. Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Kirlangiç, Okan Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
  • Kolahan, Farhad An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
  • Kolahchi, Reza Nonlocal DQM for a Nonlinear Buckling Analysis of DLGSs Integrated with Zno Piezoelectric Layers [Volume 45, Issue 1, 2014, Pages 9-22]
  • Koohsorkhi, Javad Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
  • Kordani, Naser Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
  • Kumar, Rajesh Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]

L

  • Lashkaripour, Ali Fractional Order PID Controller for Diabetes Patients [Volume 46, Issue 1, 2015, Pages 69-76]
  • Lashkaripour, Ali Numerical Study of Droplet Generation Process in a Microfluidic Flow Focusing [Volume 46, Issue 2, 2015, Pages 167-175]
  • Lavaei, Mohammad Reza Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Lemonnier, Denis A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
  • Liu, ZhiYuan Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]

M

  • Mady, Amail Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
  • Mahdavi Adeli, Mohsen Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
  • Mahdavi Adeli, Mohsen Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
  • Mahdavi Adeli, Mohsen Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • Mahdavian, mohammad Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
  • Mahdavinezhad, Ramezanali Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Mahjoob, Mohammad Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
  • Mahjoob, Mohammad Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
  • Mahjoob, Mohammad Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • Mahmoodi, Narges Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Mahmoodi darian, Hossein Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
  • Mahmoodi Darian, Hossein Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
  • Mahmoudi, Mahnaz A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
  • Mahsud, Yasir Slip effect on the unsteady electroosmotic and pressure-driven flows of two-layer fluids in a rectangular microchannel [Volume 52, Issue 1, 2021, Pages 12-26]
  • Mahzoon, Mojtaba A Computational study on the effect of different design parameters on the accuracy of biopsy procedure [Volume 46, Issue 2, 2015, Pages 221-231]
  • Majidi, Sahand A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
  • Makvandi, Hesam Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
  • Makvandi, Hesam A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • Malekshahi, Ahmad A review of size-dependent elasticity for nanostructures [Volume 49, Issue 1, 2018, Pages 197-211]
  • Malekshahi, Ahmad Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]
  • Mama, Benjamin O. Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Mama, Benjamin Okwudili First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
  • Manteghi, Soleiman Numerical and Neural Network Modeling and control of an Aircraft Propeller [Volume 49, Issue 1, 2018, Pages 63-69]
  • Maracy, Abdolali Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • Marti, Ali Ihsan Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • Martins, Diana The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
  • Mashhadi Keshtiban, Mohsen An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests [Volume 51, Issue 1, 2020, Pages 91-97]
  • Mashhadi Keshtiban, Mohsen Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging [Volume 52, Issue 1, 2021, Pages 69-84]
  • Mashhadi Keshtiban, Peyman An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests [Volume 51, Issue 1, 2020, Pages 91-97]
  • Mashhadi Keshtiban, Peyman Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging [Volume 52, Issue 1, 2021, Pages 69-84]
  • Masih-Tehrani, Masoud Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
  • Matin Ghahfarokhi, Zahra A Computational study on the effect of different design parameters on the accuracy of biopsy procedure [Volume 46, Issue 2, 2015, Pages 221-231]
  • Mazidi, Mohsen Effect of Wind on Thermal Performance of Heller Dry Cooling Tower [Volume 45, Issue 1, 2014, Pages 1-8]
  • Modarakar Haghighi, Ahmad 3-node Basic Displacement Functions in Analysis of Non-Prismatic Beams [Volume 46, Issue 1, 2015, Pages 77-91]
  • Moeinkhah, Hossein A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
  • Moeinzadeh, Masoud Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Moghimi Zand, Mahdi Pull-In Instability and Vibrations of a Beam Micro-Gyroscope [Volume 45, Issue 1, 2014, Pages 29-34]
  • Moghimi Zand, Mahdi A Computational study on the effect of different design parameters on the accuracy of biopsy procedure [Volume 46, Issue 2, 2015, Pages 221-231]
  • Moghimi Zand, Mahdi Thread Pitch Variant in Orthodontic Mini-screws: A 3-D Finite Element Analysis [Volume 46, Issue 2, 2015, Pages 257-265]
  • Moghimi Zand, Mahdi Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
  • Moghimi Zand, Mahdi Studying piezoelastic and piezomagnetoelastic configurations for different excitation frequencies in MEMS energy harvesters [Volume 47, Issue 2, 2016, Pages 241-246]
  • Moghimi Zand, Mahdi Dielectrophoretic effect of nonuniform electric fields on the protoplast cell [Volume 48, Issue 1, 2017, Pages 1-14]
  • Moghimi Zand, Mahdi Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
  • Moghimi Zand, Mahdi Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
  • Mohammadi, Arash Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • Mohammadi, Bijan Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
  • Mohammadi, Hosein Numerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming [Volume 45, Issue 1, 2014, Pages 35-45]
  • Mohammadzadeh, Saeed Strongly stable multi-time stepping method with the option of controlling amplitude decay in responses [Volume 49, Issue 1, 2018, Pages 133-142]
  • Mohandes, Masood Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
  • Moharami, Rasoul Numerical Analysis of explosion effects on the redistribution of residual stresses in the underwater welded pipe [Volume 47, Issue 1, 2016, Pages 121-128]
  • Mohsenian, Ali Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
  • Momeni Bashusqeh, Saeed Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
  • Moore, Mathew Sessile and Pendant Micro-Liter Drops Evaporate at Different Rates: An Experimental Approach [Volume 47, Issue 1, 2016, Pages 109-119]
  • Moosavian, S. Ali A. Dynamics modeling and stable gait planning of a quadruped robot in walking over uneven terrains [Volume 46, Issue 2, 2015, Pages 205-220]
  • Moosavian, S. Ali. A A Low Friction Demanding Approach in Gait Planning for Humanoid Robots During 3D Manoeuvres [Volume 45, Issue 1, 2014, Pages 47-60]
  • Moradi, Abbas Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
  • Moradi, Abbas Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Moradi, Shapour Updating finite element model using frequency domain decomposition method and bees algorithm [Volume 48, Issue 1, 2017, Pages 75-88]
  • Moradi, Shapour A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • Moradi, Shapour Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • Moradi, Shapour A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
  • Moradi, Shapour Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
  • Moradi, Shapour The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • Moradi, Shapour Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Mosalmani, Reza Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Mosavi Mashhadi, Mahmoud Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
  • Mosavi Mashhadi, Mahmoud Simultaneous hydroforming of bulge- and T-zone in 304 stainless steel and 70/30 brass tubes [Volume 51, Issue 1, 2020, Pages 213-230]
  • Mottaghi Dastenaei, Fatemeh Thread Pitch Variant in Orthodontic Mini-screws: A 3-D Finite Element Analysis [Volume 46, Issue 2, 2015, Pages 257-265]
  • Mousavi Khoram, Mehdi A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Mousavi Khoram, Mehdi Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
  • Mousavi Nejad Souq, Seyyed Sajad A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [(Articles in Press)]

N

  • Naei, M. Hassan Large Amplitude Vibration Analysis of Graphene Sheets as Resonant Mass Sensors Using Mixed Pseudo-Spectral and Integral Quadrature Methods [Volume 45, Issue 1, 2014, Pages 61-75]
  • Najafi, Amin Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
  • Najafi, Farshid Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
  • Najafi, Farshid Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
  • Najafzadeh, Mehdi Size dependent nano-spherical pressure vessels based on strain gradient theory [Volume 52, Issue 2, 2021, Pages 307-319]
  • Namazian, Zafar Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Namazian, Zafar Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
  • Nariman-zadeh, Nader Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
  • Narooei, Keivan Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]
  • Nasr, Mohamed Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
  • Negahban, Ali Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
  • Nejadali, Jafar Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
  • Nejat, Amir Aerodynamic Noise Computation of the Flow Field around NACA 0012 Airfoil Using Large Eddy Simulation and Acoustic Analogy [Volume 46, Issue 1, 2015, Pages 41-50]
  • Nekoo, Saeed Numerical and Neural Network Modeling and control of an Aircraft Propeller [Volume 49, Issue 1, 2018, Pages 63-69]
  • Nekounam, Houra Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Nemavhola, F. Evaluating computational performances of hyperelastic models on supraspinatus tendon uniaxial tensile test data [Volume 52, Issue 1, 2021, Pages 27-43]
  • Ngwangwa, Harry M Evaluating computational performances of hyperelastic models on supraspinatus tendon uniaxial tensile test data [Volume 52, Issue 1, 2021, Pages 27-43]
  • Nikkhah bahrami, Mansoor Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Nikkhah bahrami, Mansoor A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
  • Nikkhah Bahrami, Mansour Refined plate theory for free vibration analysis of FG nanoplates using the nonlocal continuum plate model [Volume 48, Issue 1, 2017, Pages 123-136]
  • Nnabuike, Eya Analysis of Flow of Nanofluid through a Porous Channel with Expanding or Contracting Walls using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 225-232]
  • Noghrehabadi, Aminreza Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
  • Noghrehabadi, Aminreza Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
  • Noghrehabadi, Aminreza Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
  • Noorolahian, Saeed Thread Pitch Variant in Orthodontic Mini-screws: A 3-D Finite Element Analysis [Volume 46, Issue 2, 2015, Pages 257-265]
  • Noroozi, Reza Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
  • Noroozi, Reza Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
  • Norouzi, Saeed Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
  • Norouzi, Saeed Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
  • Nouri, Maryam Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
  • Nouri-Bidgoli, Hossein Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
  • Numanoglu, Hayri Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
  • Nwoji, Clifford U. Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Nwoji, Clifford Ugochukwu First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]

O

  • Oba Mustapha, Zubair Analysis of Flow of Nanofluid through a Porous Channel with Expanding or Contracting Walls using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 225-232]
  • Obiekea, Victoria Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Oguntala, George Analysis of Flow of Nanofluid through a Porous Channel with Expanding or Contracting Walls using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 225-232]
  • Oguntala, George Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
  • Oguntala, George Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
  • Oguntala, George Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Olofinkua, Joseph Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
  • Olofinkua, Joseph On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
  • Onah, Hyginus N. Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Onah, Hyginus Nwankwo First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
  • Onitiri, Ade NUMERICAL INVESTIGATION OF THE PERFORMANCE OF FIBRE-GLASS/TALC FILLED EPOXY COMPOSITE AS INSULATOR IN HEATING APPLICATIONS [(Articles in Press)]
  • Onyia, Michael E. Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
  • Onyia, Michael Ebie First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
  • Orak, Mohammad A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Ostadi Moghaddam, Amir Pull-In Instability and Vibrations of a Beam Micro-Gyroscope [Volume 45, Issue 1, 2014, Pages 29-34]
  • Oyediran, Ayowole Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
  • Oyekeye, Manasseh Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
  • Oyelade, Akintoye Dynamic behaviour of concrete containing aggregate resonant frequency [Volume 49, Issue 2, 2018, Pages 380-385]

P

  • Paknahad, Masoud Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
  • Parhizgar, Ehsan Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
  • Parhizkar Yaghoobi, Mohammad An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
  • Partovi, Ehsan A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Parvizi, Ali Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Parvizi, Ali Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
  • Parvizi, Ali Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Pasoodeh, Behzad Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
  • Peyghambarzadeh, Seyed Mohsen Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
  • Piloto, Paulo A.G. Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Piloto, Paulo A.G. A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
  • Poorveis, Davood A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
  • Pourjafar, mohammad Unsteady Magneto Hydro Dynamic Flow of a Second Order Fluid over an Oscillating Sheet with a Second Order Slip Flow Model [Volume 47, Issue 2, 2016, Pages 209-218]

Q

  • Qadan, Hani A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Quadros, Jaimon Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]

R

  • Rahaie, Mahdi Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
  • Rahimian, Mohamad Hasan Four different types of a single drop dripping down a hole under gravity by lattice Boltzmann method [Volume 47, Issue 1, 2016, Pages 89-98]
  • Rahimian, Mohamad Hasan Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
  • Rahimian, Mohamad Hasan The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
  • Rahimi-Movaghar, Vafa Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
  • Rahmani, Hossein Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
  • Rahmanpour, Morteza A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
  • Rahul, Jagdeep Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
  • Raissi, Hamed Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • Rajabpoor, Amir Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • R. Almeida, Luis Philipe Unified refined beam theory applied to the Spectral Finite Element Method for analysis of laminated composites. [Volume 52, Issue 1, 2021, Pages 44-60]
  • Ramachandra Prasad, V Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
  • Ramakrishna, S Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
  • Ramin, Hadi Comparative study between dynamic transient and degree-hours methods to estimate heating and cooling loads of building’s wall [Volume 46, Issue 2, 2015, Pages 153-165]
  • Ramin, Hadi Unsteady Magneto Hydro Dynamic Flow of a Second Order Fluid over an Oscillating Sheet with a Second Order Slip Flow Model [Volume 47, Issue 2, 2016, Pages 209-218]
  • Rana, G. C. On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
  • Rashidi, Alimorad Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
  • Rasouli, Mohamadreza Numerical Study of Droplet Generation Process in a Microfluidic Flow Focusing [Volume 46, Issue 2, 2015, Pages 167-175]
  • Rastgoo, Abbas Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
  • Rauf, Abdul Slip effect on the unsteady electroosmotic and pressure-driven flows of two-layer fluids in a rectangular microchannel [Volume 52, Issue 1, 2021, Pages 12-26]
  • Regbat, Milad An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests [Volume 51, Issue 1, 2020, Pages 91-97]
  • Rezapour, Moein Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
  • Riasi, Alireza Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
  • Riasi, Alireza Performance Improvements of a Centrifugal Pump with Different Impellers using Polymer Additive [Volume 48, Issue 2, 2017, Pages 199-206]
  • Riasi, Alireza Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
  • Riasi, Alireza Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • Ribeiro, Fernando A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
  • Rigobello, Ronaldo A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
  • Rohani Rad, Elaheh Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
  • Rohani Rad, Elaheh Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
  • Rohani Raftar, Hamid Reza Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
  • Roshanfar, Majid Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
  • Rouhi, Saeed On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]

S

  • Sabaapour, Mohammad Reza Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel [Volume 46, Issue 1, 2015, Pages 63-68]
  • Sabaapour, Mohammad Reza From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
  • Sachdeva, Sunil Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
  • Sadedel, Majid Analytical Dynamic Modelling of Heel-off and Toe-off Motions for a 2D Humanoid Robot [Volume 46, Issue 2, 2015, Pages 243-256]
  • Sadeghi, Keyvan Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
  • Sadiq, Mufutau O. Dynamic behaviour of concrete containing aggregate resonant frequency [Volume 49, Issue 2, 2018, Pages 380-385]
  • Saharkhiz, Saleh A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
  • Salehi, Mehdi A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
  • Salehi Kolahi, Mohammad Reza A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
  • Salimi, Mohammad Hosein Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
  • Salmani Tehrani, Mehdi A Computational study on the effect of different design parameters on the accuracy of biopsy procedure [Volume 46, Issue 2, 2015, Pages 221-231]
  • Samimi Behbahan, Amin Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
  • Santos, Lucas Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
  • Sarhaddi, Faramarz Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
  • Sarhaddi, Faramarz Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
  • Sarreshtehdari, Ali Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
  • Sarvi, Z. Closed-form Molecular Mechanics Formulations for the 3D Local Buckling and 2D Effective Young’s Modulus of the Nanosheets [Volume 46, Issue 1, 2015, Pages 51-62]
  • Sattari, Amirmohammad Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran [Volume 47, Issue 1, 2016, Pages 53-66]
  • Sattari, Amirmohammad Numerical and Economic Study of Performance of Centrifugal Pump as Turbine [Volume 48, Issue 2, 2017, Pages 151-160]
  • Sattari, Amirmohammad Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • Sattari, Sorena Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
  • Sawalmeh, Mohammed Z. A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Sayar, Alireza Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [(Articles in Press)]
  • Sayyad, Atteshamuddin S. On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
  • Sayyad, Atteshamuddin S. A new higher-order theory for the static and dynamic responses of sandwich FG plates [Volume 52, Issue 1, 2021, Pages 102-125]
  • Sedaghati, Mohammad The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
  • Sekunowo, Israel Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Seyyed Fakhrabadi, Mir Masoud Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
  • Seyyed Nosrati, Amin Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
  • Shafiei, Ali Reza Replacing friction model with interaction between particles in analyzing orthogonal and rotational cutting processes using SPH method [Volume 52, Issue 2, 2021, Pages 297-306]
  • Shahbazpanahi, Shahriar Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
  • Shahravi, Morteza Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
  • Shajari, Ali R Transient thermo-visco-elastic response of a functionally graded non-axisymmetric cylinder [Volume 46, Issue 2, 2015, Pages 191-204]
  • Shakki, Saeid Studying piezoelastic and piezomagnetoelastic configurations for different excitation frequencies in MEMS energy harvesters [Volume 47, Issue 2, 2016, Pages 241-246]
  • Sharda, Abhilasha On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
  • Shariat Panahi, Masoud Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
  • Sharififar, M. Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
  • Sharififar, Masoud Numerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming [Volume 45, Issue 1, 2014, Pages 35-45]
  • Shariyat, M. Closed-form Molecular Mechanics Formulations for the 3D Local Buckling and 2D Effective Young’s Modulus of the Nanosheets [Volume 46, Issue 1, 2015, Pages 51-62]
  • Shariyat, M. Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
  • Shariyat, Mohammad Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
  • Sharma, Veena On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
  • Shekari, Malihe Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
  • Shekari, Younes Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
  • Shekari, Younes Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
  • Shinde, Bharti M. A new higher-order theory for the static and dynamic responses of sandwich FG plates [Volume 52, Issue 1, 2021, Pages 102-125]
  • Shirpay, Ali Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
  • Shishesaz, Mohammad Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
  • Shishesaz, Mohammad Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
  • Shishesaz, Mohammad A review of size-dependent elasticity for nanostructures [Volume 49, Issue 1, 2018, Pages 197-211]
  • Shishesaz, Mohammad Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]
  • Shishesaz, Mohammad A review on stress distribution, strength and failure of bolted ‎composite joints [Volume 49, Issue 2, 2018, Pages 415-429]
  • Shishesaz, Mohammad Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
  • Shishesaz, Mohammad A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
  • Shishesaz, Mohammad Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
  • Shishesaz, Mohammad Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Sh Khoram-Nejad, Emadaldin Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
  • Shojaee, Taghi Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
  • Shokrieh, Mahmood Transient thermo-visco-elastic response of a functionally graded non-axisymmetric cylinder [Volume 46, Issue 2, 2015, Pages 191-204]
  • Sidig, Adam Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
  • Silva, Vania Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]
  • Sobamowo, Gbeminiyi Musibau On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
  • Sobamowo, Gbeminiyi Analysis of Heat transfer in Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 271-284]
  • Sobamowo, Gbeminiyi Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
  • Sobamowo, Gbeminiyi Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
  • Sobamowo, Mike Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
  • Solati, Ali Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
  • Soleimani, Ali Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
  • Soleimanpour, Mohammad Ali A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
  • Souza Santana, Hilton Marques Unified refined beam theory applied to the Spectral Finite Element Method for analysis of laminated composites. [Volume 52, Issue 1, 2021, Pages 44-60]

T

  • Tabatabaei, Hamidreza Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
  • Taghinia, Ashkan Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
  • Taghipour birgani, Pezhman Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
  • Taghipour Birgani, Pezhman Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
  • Taher, Amir Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging [Volume 52, Issue 1, 2021, Pages 69-84]
  • Taheri, Mohammad Hasan Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
  • Talebian, Seydeh Hosna Review of Enhanced Oil Recovery Decision Making in Complex Carbonate Reservoirs: Fluid Flow and Geomechanics Mechanisms [Volume 52, Issue 2, 2021, Pages 350-365]
  • Tavaf, Vahid Refined plate theory for free vibration analysis of FG nanoplates using the nonlocal continuum plate model [Volume 48, Issue 1, 2017, Pages 123-136]
  • Torabi, Keivan Active control vibration of circular and rectangular plate with Quantitative Feedback Theory (QFT) Method [Volume 47, Issue 2, 2016, Pages 261-271]
  • Tourajizadeh, Hami Numerical and Neural Network Modeling and control of an Aircraft Propeller [Volume 49, Issue 1, 2018, Pages 63-69]

U

  • Uzun, Büşra Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]

V

  • Vahidi, Bahman A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
  • Vahidi, Dara Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran [Volume 47, Issue 1, 2016, Pages 53-66]
  • Vakilipour, Shidvash A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
  • Varmazyar, Mostafa Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
  • Vasaghi_Gharamaleki, Behnoosh The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
  • Vaziri Sereshk, Mohammad Reza A mesh generation procedure to simulate bimaterials [Volume 46, Issue 2, 2015, Pages 177-190]
  • VENKATADRI, K Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
  • Venkata Lakshmi, C Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
  • Vijaya Kumar Reddy, K. Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
  • Vosough, Amir Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]

W

  • Wang, Lin Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Wong, C.P. Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]

Y

  • Yaghootian, Amin Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
  • Yaghoubi, Mahmood Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
  • Yaghoubi, Saeed An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
  • Yüksel, Yusuf Ziya Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
  • Yaseen, Nusayba A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
  • Yildiz, Ali Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
  • Yinusa, Ahmed Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
  • Yousefikoma, Aghil Analytical Dynamic Modelling of Heel-off and Toe-off Motions for a 2D Humanoid Robot [Volume 46, Issue 2, 2015, Pages 243-256]
  • Yousefikoma, Aghil Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]

Z

  • Zabihihesari, Alireza Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
  • Zakeri, Mohammad 3-node Basic Displacement Functions in Analysis of Non-Prismatic Beams [Volume 46, Issue 1, 2015, Pages 77-91]
  • Zakeri, Mohammad Numerical free vibration analysis of higher-order shear deformable beams resting on two-parameter elastic foundation [Volume 46, Issue 2, 2015, Pages 117-131]
  • Zakerzadeh, Mohamadreza Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
  • Zakerzadeh, Mohamadreza Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
  • Zamani, Iman Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
  • Zamanian, Mehdi Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
  • Zamani Nejad, Mohammad Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions [Volume 48, Issue 1, 2017, Pages 15-26]
  • Zamani Nejad, Mohammad Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
  • Zamani Nejad, Mohammad A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
  • Zarezadeh, Esmail Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
  • Zarezadeh, Esmail Size dependent nano-spherical pressure vessels based on strain gradient theory [Volume 52, Issue 2, 2021, Pages 307-319]
  • Zargaripoor, Ali Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
  • Zargaripoor, Ali Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
  • Zargaripoor, Ali A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
  • Zelibe, Christian Georgi NUMERICAL INVESTIGATION OF THE PERFORMANCE OF FIBRE-GLASS/TALC FILLED EPOXY COMPOSITE AS INSULATOR IN HEATING APPLICATIONS [(Articles in Press)]
  • Zenkour, Ashraf Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model [Volume 50, Issue 1, 2019, Pages 148-156]
  • Zenkour, Ashraf Nonlocal thermoelastic semi-infinite medium with variable thermal conductivity due to a laser short-pulse [Volume 50, Issue 1, 2019, Pages 90-98]
  • Zenkour, Ashraf Vibration suppression analysis for laminated composite beams embedded actuating magnetostrictive layers [Volume 50, Issue 1, 2019, Pages 69-75]
  • Zenkour, Ashraf M. Vibration of inhomogeneous fibrous laminated plates using an efficient and simple polynomial refined theory [Volume 52, Issue 2, 2021, Pages 233-245]
  • Zhou, Kun Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
  • Zolfaghari, Naeem Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]