<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>University of Tehran Press</PublisherName>
				<JournalTitle>Journal of Computational Applied Mechanics</JournalTitle>
				<Issn>2423-6713</Issn>
				<Volume>52</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Contact mechanics of human knee joint: Analytical approach</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>553</FirstPage>
			<LastPage>569</LastPage>
			<ELocationID EIdType="pii">85248</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jcamech.2021.326466.633</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>SACHIN</FirstName>
					<LastName>KHOT</LastName>
<Affiliation>School of Mechanical Engineering  KLE Technological University
BVB Campus, Vidyanagar  Hubballi</Affiliation>
<Identifier Source="ORCID">0000-0002-7883-7674</Identifier>

</Author>
<Author>
					<FirstName>Ravi</FirstName>
					<LastName>Guttal</LastName>
<Affiliation>KLE technological university Hubballi
Vidyanagar  Hubballi</Affiliation>
<Identifier Source="ORCID">0000-0002-4373-8852</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>06</Month>
					<Day>30</Day>
				</PubDate>
			</History>
		    <Abstract>A new methodology for modeling tibio-femoral articular contact of a knee joint based on contact models of the classical contact mechanics is established. The given analytical models of articular contact are extended to the case of contact between low strain arbitrary linear elastic tissues, i.e., cartilages and meniscus. The approach uses the geometries of contact surfaces and the generalization of the Hertzian contact theory of non-conforming bodies with frictionless contact interaction between elastic articular tissues. The normal and tangential contact displacements are determined analytically based on the exact solutions for the spherical contact between the articular tissues of the knee. The non-linear stiffness (secant and tangential stiffness) of the knee joint’s elastic half-space is derived using the analytical relationships. The method is demonstrated by exploring a case study, and the results are compared with the current literature to verify the fidelity of the proposed analytical approach. The analytical models facilitate accurate contact mechanics of the knee joint. Researchers may now use these analytical models to develop knee surrogate models in multibody dynamics.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Knee joint slip</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">knee joint displacement</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">stick-slip zones</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">non-linear stiffness</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">geometric nonlinearities</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jcamech.ut.ac.ir/article_85248_c1de5424fe45336ef3bed9c72c8c8c17.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran Press</PublisherName>
				<JournalTitle>Journal of Computational Applied Mechanics</JournalTitle>
				<Issn>2423-6713</Issn>
				<Volume>52</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Analytical solution of pulsating flow and forced convection heat transfer in a pipe filled with porous medium</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>570</FirstPage>
			<LastPage>587</LastPage>
			<ELocationID EIdType="pii">85249</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jcamech.2021.327163.638</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Fatemeh</FirstName>
					<LastName>Sobhnamayan</LastName>
<Affiliation>Department of Mechanical Engineering, University of Sistan and Baluchestan, Zahedan, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Faramarz</FirstName>
					<LastName>Sarhaddi</LastName>
<Affiliation>Department of Mechanical Engineering, University of Sistan and Baluchestan, Zahedan, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Amin</FirstName>
					<LastName>Behzadmehr</LastName>
<Affiliation>Department of Mechanical Engineering, University of Sistan and Baluchestan, Zahedan, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>07</Month>
					<Day>13</Day>
				</PubDate>
			</History>
		    <Abstract>In this paper, the pulsating flow and forced convection heat transfer in a pipe filled with porous medium is investigated. The pipe is under a constant heat flux. The governing equations of the problem includes continuity, Brinkman momentum equation and energy equation. Using complex analysis technique, an analytical solution for velocity profile and temperature distribution are obtained. Also, the effect of various design parameters on velocity profile and temperature distribution is studied. Results show that the pulsating effect on velocity and temperature profile increases with the increase of Darcy number and dimensionless amplitude of pressure gradient but decreases with the increase of viscosity ratio parameter, Prandtl number and dimensionless frequency. For high dimensionless frequency (Ω&gt;30), the maximum velocity and temperature tend to be constant due to the decrease in wave amplitude.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Pulsating flow</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Circular pipe</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Porous medium</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Forced convection</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jcamech.ut.ac.ir/article_85249_148f6fe449dc406dd6eaf81d66d20914.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran Press</PublisherName>
				<JournalTitle>Journal of Computational Applied Mechanics</JournalTitle>
				<Issn>2423-6713</Issn>
				<Volume>52</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>CLOSED FORM SOLUTIONS OF THE NAVIER&#039;S EQUATIONS FOR AXISYMMETRIC ELASTICITY PROBLEMS OF THE ELASTIC HALF-SPACE</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>588</FirstPage>
			<LastPage>618</LastPage>
			<ELocationID EIdType="pii">85250</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jcamech.2021.329433.646</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Charles Chinwuba</FirstName>
					<LastName>Ike</LastName>
<Affiliation>Dept of Civil Engineering, Enugu State University of Science and Technology,
Enugu State, Nigeria</Affiliation>
<Identifier Source="ORCID">0000-0001-6952-0993</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>08</Month>
					<Day>25</Day>
				</PubDate>
			</History>
		    <Abstract>Closed form solutions are derived in this paper for Navier’s equations for axisymmetric elastic half-space problems. They are solved assuming body forces are disregarded. The Boussinesq problem is considered. The displacements are used to obtain the stress fields. The shear stress-free boundary conditions on the boundary plane and the equilibrium of vertical stress and applied load are used to completely determine displacements and stresses. Other axisymmetric load problems considered are: (i) uniform (ii) conical (iii) inverted conical distributions. In each case, the Boussinesq solution is used as a Green function, yielding the vertical stress field as double integration problem. The vertical stress field for uniform load is obtained in terms of complete elliptic integrals of the second and third kinds. The vertical stress distribution under the center of a circular foundation under uniform load is obtained as a particularization of the solution for vertical stress at any point in the elastic half-space. The same result is derived by using the point load solution as an integral Kernel function. For conical distribution of load, the point load solution is used as a Green function, reducing the problem to double integration. The closed form expressions obtained for the vertical stress distributions under the center of the circular foundation for all the axisymmetrical load distributions considered are radially symmetrical functions; which agree with the symmetrical nature of the problem. The results obtained for all the load types considered are identical with previous results found in the literature.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Navier's differential equations of equilibrium</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Axisymmetric elasticity problem</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Classical Boussinesq problem</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Elastic Half-Space</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jcamech.ut.ac.ir/article_85250_52dee84f39254939be8a3f2fe51646a6.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran Press</PublisherName>
				<JournalTitle>Journal of Computational Applied Mechanics</JournalTitle>
				<Issn>2423-6713</Issn>
				<Volume>52</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Implementation of Behavior-Based Navigation Algorithm on Four-Wheel Steering Mobile Robot</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>619</FirstPage>
			<LastPage>641</LastPage>
			<ELocationID EIdType="pii">85251</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jcamech.2021.330072.648</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Behzad</FirstName>
					<LastName>Saeedi</LastName>
<Affiliation>Mechatronics Laboratory, Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-3244-1121</Identifier>

</Author>
<Author>
					<FirstName>Majid</FirstName>
					<LastName>Sadedel</LastName>
<Affiliation>Assistant Professor, Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran.</Affiliation>
<Identifier Source="ORCID">0000-0002-0285-8460</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>09</Month>
					<Day>04</Day>
				</PubDate>
			</History>
		    <Abstract>In recent years, wheeled autonomous mobile robots have become widely used in a number of industrial applications. Therefore, accurate and efficient controllers are required in order to assure safe and accurate navigation of these vehicles. In this study, an effective behavior-based navigation algorithm (BBNA) is applied to control the trajectory of the four-wheel steering (FWS) mobile robot. The BBNA combines the ‘Goal-to-Goal’ and ‘Obstacle Avoidance’ behaviors into one comprehensive navigation strategy. With this algorithm, many switching between modes occurs over a short amount of time, which increases the risk of creating the chattering phenomenon. Due to overcoming this phenomenon, an additional mode is considered between the ‘Go-to-Goal’ and ‘Obstacle Avoidance’ modes that is called ‘Follow-Wall’ behavior. At first, the BBNA was designed to control the navigation of a point mass robot. One of the significant characteristics of BBNA is that its control commands can be used to calculate the linear and angular velocity of a unicycle mobile robot. Thus, the BBNA can navigate the unicycle mobile robot successfully to the goal position. In order to apply the BBNA to an FWS mobile robot, its dynamic equations must be converted to those of a unicycle mobile robot. The present study determines the dynamic equations of the FWS mobile robot by using the Ackermann- Jeantnat model of steering. Since these equations are the same as those for the unicycle mobile robot, the FWS mobile robot can be controlled by the BBNA. Finally, the implementation of the BBNA for the FWS mobile robot is simulated using MATLAB software. Simulated results indicate that BBNA generates an optimal path by perfectly switching between ‘Go to Goal’, ‘Obstacle Avoidance’, and ‘Follow Wall’ modes, which keeps the FWS mobile robot arriving at the goal position.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Four-Wheel Steering Mobile Robot</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Navigation Algorithm</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Unicycle Mobile Robot</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Behavior-Based Control</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jcamech.ut.ac.ir/article_85251_5cf5ef41f8dba344c2b574c6a8e5c989.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran Press</PublisherName>
				<JournalTitle>Journal of Computational Applied Mechanics</JournalTitle>
				<Issn>2423-6713</Issn>
				<Volume>52</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Nonlinear coupled torsional-radial vibration of single-walled carbon nanotubes using numerical methods</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>642</FirstPage>
			<LastPage>663</LastPage>
			<ELocationID EIdType="pii">85253</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jcamech.2021.333435.661</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Mohammad Reza</FirstName>
					<LastName>Ebrahimian</LastName>
<Affiliation>Faculty of Mechanical Engineering, Kar Higher Education Institute, Qazvin, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Zahra</FirstName>
					<LastName>Azimzadeh</LastName>
<Affiliation>Department of Mathematics, Yadegar-e-Imam Khomeini (RAH) Shahre Rey Branch, Islamic Azad University, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Alireza</FirstName>
					<LastName>Fatahi-Vajari</LastName>
<Affiliation>Department of Mechanical Engineering, Shahryar Branch, Islamic Azad University, Shahryar, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Mojtaba</FirstName>
					<LastName>Shariati</LastName>
<Affiliation>Department of Mechanical Engoneering, Shahid Chamran University of Ahwaz, Ahwaz, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>11</Month>
					<Day>04</Day>
				</PubDate>
			</History>
		    <Abstract>This paper analyzes the nonlinear coupled torsional-radial vibration of single-walled carbon nanotubes (SWCNTs) based on numerical methods. Two partial differential equations that govern the nonlinear coupled torsional-radial vibration for such nanotube are derived using doublet mechanics (DM) principles. First, these equations are reduced to ordinary differential equations using Galerkin method and then solved using homotopy perturbation method (HPM) to obtain the nonlinear natural frequencies in coupled torsional-radial vibration mode. It is found that the obtained frequencies are complicated due to coupling between two vibration modes. The dependence of boundary conditions, vibration modes and nanotubes geometry on the nonlinear coupled torsional-radial vibration characteristics of SWCNTs are studied in details. It was shown that boundary conditions and maximum vibration velocity have significant effects on the nonlinear coupled torsional-radial vibration response of SWCNTs. It was also seen that unlike the linear model, as the maximum vibration velocity increases, the natural frequencies of vibration increase too. To show the effectiveness and ability of this method, the results obtained with the present method are compared with the fourth order Runge-Kuta numerical results and good agreement is observed. To the knowledge of authors, the results given herein are new and can be used as a basic work for future papers.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Homotopy Perturbation Method</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">nonlinear coupled torsional-radial vibration</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">single-walled carbon nano-tubes</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">natural frequency</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jcamech.ut.ac.ir/article_85253_479fe2d07e83a3bcf828f4ed19ce7943.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran Press</PublisherName>
				<JournalTitle>Journal of Computational Applied Mechanics</JournalTitle>
				<Issn>2423-6713</Issn>
				<Volume>52</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Analyses of entropy generation for a solar minichannel flat plate collector system using different types of nanofluids</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>664</FirstPage>
			<LastPage>681</LastPage>
			<ELocationID EIdType="pii">85254</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jcamech.2021.333705.662</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Lakhdar</FirstName>
					<LastName>Bouragbi</LastName>
<Affiliation>Mechanical Laboratory of Materials and Industrial Maintenance (LR3MI), Badji Mokhtar University, Annaba, Algeria</Affiliation>

</Author>
<Author>
					<FirstName>AZZOUZ</FirstName>
					<LastName>SALAHEDDINE</LastName>
<Affiliation>Mechanical Laboratory of Materials and Industrial Maintenance (LR3MI), Badji Mokhtar University, Annaba, Algeria</Affiliation>

</Author>
<Author>
					<FirstName>BRAHIM</FirstName>
					<LastName>MAHFOUD</LastName>
<Affiliation>Departement of mechanical, University of BOUIRA, Algeria</Affiliation>
<Identifier Source="ORCID">0000-0002-0709-8958</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>11</Month>
					<Day>09</Day>
				</PubDate>
			</History>
		    <Abstract>The working fluid plays a major role in improving the efficiency of the energy system, so the method and criteria of choice are extremely important. Nevertheless, these methods are usually based on the First Law of Thermodynamics (FLT), while the concepts of entropy and irreversibility on which the Second Law of Thermodynamics (SLT) is based are often ignored in the choice of the fluid. In this paper, a new approach is proposed to select a fluid among a group of fluids in order to use it as a working fluid in a Minichannel Flat Plate Solar Collector (MFPSC). For this, a numerical simulation was performed on a fluid in laminar flow in a small rectangular channel subjected to a uniform heat flux of (1000 W/m2). The use of Computational Fluid Dynamics (CFD) based on the finite volume method was implemented to solve the governing equations. The essential parameters on which the selection is based are the entropy generation (Sgen), the irreversibility of entropy generation number (Ns), the Bejan number (Be), and the Energy Performance Criterion (EPC). The analyses were performed on a group of five fluids two conventional (water and methanol), the rest are nanofluids (Al2O3-H2O, CuO-H2O, and Fe3O4 -H2O). Multiple parallel-computation phases are defined by user-defined functions (UDFs) for all fluids. It is found that nanofluids offer higher heat transfer ability than conventional fluids, and the behavior of the nanofluid (CuO-H2O) shows on average a minimum total entropy generation (minimum irreversibility) compared to other fluids (conventional and nanofluids), which reduces the energy degradation and improves the heat transfer. Therefore, it is chosen as the working fluid for the MFPSC.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Collector, entropy generation</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Irreversibility</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">minichannel, nanofluid</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jcamech.ut.ac.ir/article_85254_22ccdfd754d960a956f6c93089a0e196.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran Press</PublisherName>
				<JournalTitle>Journal of Computational Applied Mechanics</JournalTitle>
				<Issn>2423-6713</Issn>
				<Volume>52</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>THE RADIAL POINT INTERPOLATION METHOD IN THE BENDING ANALYSIS OF SYMMETRIC LAMINATES USING HSDTS</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>682</FirstPage>
			<LastPage>716</LastPage>
			<ELocationID EIdType="pii">85268</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jcamech.2021.323598.616</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Daniel</FirstName>
					<LastName>Rodrigues</LastName>
<Affiliation>INEGI &amp;ndash; Institute of Science and Innovation in Mechanical and Industrial Engineering</Affiliation>
<Identifier Source="ORCID">0000-0003-1101-9391</Identifier>

</Author>
<Author>
					<FirstName>Jorge</FirstName>
					<LastName>Belinha</LastName>
<Affiliation>School of Engineering, Polytechnic of Porto (ISEP)</Affiliation>
<Identifier Source="ORCID">0000-0002-0539-7057</Identifier>

</Author>
<Author>
					<FirstName>Renato</FirstName>
					<LastName>Natal Jorge</LastName>
<Affiliation>Faculty of Engineering, University of Porto (FEUP), Department of Mechanical Engineering</Affiliation>
<Identifier Source="ORCID">0000-0002-7281-579X</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>05</Month>
					<Day>10</Day>
				</PubDate>
			</History>
		    <Abstract>The bending analysis of composite structures is usually performed using the Finite Element Method (FEM), which is also used in many fields of engineering. However, other efficient, accurate, and robust numerical methods can be alternatives to FEM’s widespread use. This work focus on a meshless discretization technique - the Radial Point Interpolation Method (RPIM) – which only requires an unstructured nodal distribution to discretize the problem domain. The numerical integration of the Galerkin weak form governing the plate’s bending problem is performed using a background integration mesh. The nodal connectivity is enforced using the ‘influence-domain’ concept which is based on a radial search of nodes closer to an integration point. Thus, in this work, the RPIM is used to analyse the bending behaviour of symmetric cross-ply composite laminated plates using equivalent single layer (ESL) formulations, following different transverse high-order shear deformation theories (HSDTs). Varying the plate’s geometry and stacking sequences, the applied loads, or the plate model, several composite laminated plates are analysed. In the end, the meshless solutions are compared with analytical solutions available in the literature. The accuracy of the meshless approach is proved and several new numerical solutions for the bending of symmetric laminates are proposed.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Symmetric Laminated Plates</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">High-Order Shear Deformation Theories</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Meshless method</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Radial Point Interpolation Method (RPIM)</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jcamech.ut.ac.ir/article_85268_752f91f951f6d2943d76cf5cb844097b.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran Press</PublisherName>
				<JournalTitle>Journal of Computational Applied Mechanics</JournalTitle>
				<Issn>2423-6713</Issn>
				<Volume>52</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>717</FirstPage>
			<LastPage>730</LastPage>
			<ELocationID EIdType="pii">85269</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jcamech.2021.332426.656</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Shahrouz</FirstName>
					<LastName>Yousefzadeh</LastName>
<Affiliation>Department of Mechanical Engineering, Aligudarz branch,
Islamic Azad University, Aligudarz , Iran</Affiliation>

</Author>
<Author>
					<FirstName>Mohammad</FirstName>
					<LastName>Varmazyar</LastName>
<Affiliation>Department of Mechanical Engineering, Aligudarz branch,
Islamic Azad University, Aligudarz , Iran</Affiliation>

</Author>
<Author>
					<FirstName>Mohammad Morad</FirstName>
					<LastName>Sheikhi</LastName>
<Affiliation>Faculty of Mechanical Engineering, Shahid Rajaee Teacher
Training University, Tehran , Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>10</Month>
					<Day>16</Day>
				</PubDate>
			</History>
		    <Abstract>The present paper aims to model the creep behavior of A356 Al alloy in the presence of different amounts of nickel and evaluate the microstructure of the alloys using optical microscope and scanning electron microscope (SEM). Creep properties of the alloys were obtained using the impression creep method by a cylindrical indenter within the stress range of 0.027&lt;σ/G&lt;0.030 at 473-513K. As indicated by the results, adding nickel to A356 alloy would result in eliminating the harmful phases of iron, modifying the morphology of α-Al dendrites, and creating new nickel-rich phases, besides improving the creep strength of the alloy. This is due to the formation of nickel-rich intermetallic compounds and prevention from the formation of iron-rich phases. By calculating the creep activation energy and stress power, it was found that the climb controlled dislocation creep in the dominant mechanism network in the creep deformation of A356 alloy was in the cast state and under the studied conditions. Also, nickel had no effect on the creep mechanism. Besides, the equation of the creep deformation of the alloys (the relationship between temperature, stress, and stable-state creep strain rate) was obtained. This equation can be used to predict the stable-state creep strain rate at certain temperature and stress for A356 alloy and nickel-containing alloys under climb controlled dislocation creep conditions.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Optimization</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">A356 alloy</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">nickel</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Microstructure</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Impression creep</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Creep mechanism</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Response surface</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jcamech.ut.ac.ir/article_85269_b4bd0b72a3e223b82937959a017ad259.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran Press</PublisherName>
				<JournalTitle>Journal of Computational Applied Mechanics</JournalTitle>
				<Issn>2423-6713</Issn>
				<Volume>52</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>A review on functionally graded porous structures reinforced by graphene platelets</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>731</FirstPage>
			<LastPage>750</LastPage>
			<ELocationID EIdType="pii">85255</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jcamech.2021.335739.675</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Faraz</FirstName>
					<LastName>Kiarasi</LastName>
<Affiliation>Lecturer, Faculty of Mechanical Engineering, University of Eyvanekey</Affiliation>

</Author>
<Author>
					<FirstName>Masoud</FirstName>
					<LastName>Babaei</LastName>
<Affiliation>Lecturer, Faculty of Mechanical Engineering, University of Eyvanekey</Affiliation>

</Author>
<Author>
					<FirstName>Pouya</FirstName>
					<LastName>Sarvi</LastName>
<Affiliation>University of Eyvanekey</Affiliation>

</Author>
<Author>
					<FirstName>Kamran</FirstName>
					<LastName>Asemi</LastName>
<Affiliation>Mechanical Engineering Department, Islamic Azad University- Tehran North Branch</Affiliation>
<Identifier Source="ORCID">0000-0002-7182-634X</Identifier>

</Author>
<Author>
					<FirstName>Mohammad</FirstName>
					<LastName>Hosseini</LastName>
<Affiliation>Department of Mechanical Engineering, University of Hormozgan, Bandar Abbas, Iran</Affiliation>
<Identifier Source="ORCID">0000-0001-8880-5695</Identifier>

</Author>
<Author>
					<FirstName>Mostafa</FirstName>
					<LastName>Omidi Bidgoli</LastName>
<Affiliation>Department of Mechanical Engineering, Islamic Azad University, Badroud branch, Badroud, Iran.</Affiliation>
<Identifier Source="ORCID">0000-0001-5209-6073</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>17</Day>
				</PubDate>
			</History>
		    <Abstract>Nowadays, there is a high demand for great structural implementation and multifunctionality with excellent mechanical properties. The porous structures reinforced by graphene platelet (GPLs) having valuable properties, such as heat resistance, lightweight, and excellent energy absorption, have been considerably used in different engineering implementations. However, stiffness of porous structures reduces significantly, due to the internal cavities, by adding GPLs into porous medium, effective mechanical properties of porous structure considerably enhances. To boost the efficiency and capability of structures, functionally graded (FG) porous structures reinforced by GPLs have been suggested in the literature. Therefore, some researchers tried to figure out the fantastic characteristics of these structures and research activities in this emerging area have been rapidly increasing. The present paper (a) briefly reviews the mechanical properties of functionally graded porous composites reinforced by GPLs and discusses the existing micromechanics model for the prediction of effective mechanical properties; (b) presents a comprehensive review on the mechanical analyses of these structures; (c) discuses the challenges and possible future works.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Functionally Graded Materials</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Graphene platelets</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Composite structures</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Mechanical analyses</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Porous</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jcamech.ut.ac.ir/article_85255_ae0ebc4c8f9197753546e75f69fad6c2.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>University of Tehran Press</PublisherName>
				<JournalTitle>Journal of Computational Applied Mechanics</JournalTitle>
				<Issn>2423-6713</Issn>
				<Volume>52</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Physical and chemical properties of nano-liposome, application in nano medicine</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>751</FirstPage>
			<LastPage>767</LastPage>
			<ELocationID EIdType="pii">85261</ELocationID>
			
<ELocationID EIdType="doi">10.22059/jcamech.2021.336004.677</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Vahid</FirstName>
					<LastName>Eskandari</LastName>
<Affiliation>Nanoscience and Nanotechnology Research Center, University of Kashan, Kashan, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Mohammadreza</FirstName>
					<LastName>Sadeghi</LastName>
<Affiliation>Institute of technology, University of Link&amp;ouml;ping, Link&amp;ouml;ping, Sweden</Affiliation>

</Author>
<Author>
					<FirstName>Amin</FirstName>
					<LastName>Hadi</LastName>
<Affiliation>Cellular and Molecular Research Center, Yasuj University of Medical Sciences, Yasuj, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>12</Month>
					<Day>21</Day>
				</PubDate>
			</History>
		    <Abstract>The liposome is derived from two Greek roots: &#039;Lipo&#039; meaning fat and &#039;Some&#039; meaning structure. Liposomes can be made from natural phospholipids and cholesterol and, if necessary, other additives. Liposomes were first discovered by Bangham in 1961 due to their simple, self-fulfilling structure and low cost. Liposomes are spherical vesicles with a membrane composed of bilayer phospholipids that are used to release drugs or genetic material into the cell. Current research is focused on liposome technology based on the preparation and development of long-circulating liposomes, lipid components&#039; changing, and vesicles&#039; charge amount. Liposomes, in addition to pharmaceutical carriers, are used in cutaneous, respiratory, food industries, injectable, and in genetic engineering and diagnostic applications. This paper reviews the physical and chemical characteristics, structure, construction methods, and applications of nanoliposomes in various uses as drug carriers, including the treatment of specific diseases.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Nanoliposomes</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Nanoliposomes fabrication methods</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Nanoliposomes applications</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Characteristics of nanoliposomes</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jcamech.ut.ac.ir/article_85261_c15002379bd4109a306205534073f79f.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
